Standard

Impact of Growth Temperature During Pulsed Magnetron Sputtering on the Structure and Defects of Aluminum Nitride Films. / Bogoslovtseva, A. L.; Shayapov, V. R.; Chepkasov, S. Y. et al.

In: Journal of Structural Chemistry, Vol. 67, No. 8, 04.09.2026, p. 1704-1714.

Research output: Contribution to journal › Article › peer-review

Harvard

APA

Vancouver

Author

BibTeX

@article{b85660227ef44f8fb2592e07b5de839b,
title = "Impact of Growth Temperature During Pulsed Magnetron Sputtering on the Structure and Defects of Aluminum Nitride Films",
abstract = "Structural features of aluminum nitride thin films, which are important for applications as a piezoelectric material, are studied. The films are grown by pulsed magnetron sputtering at deposition temperatures from 60 °C to 300 °C and a magnetron power of 300 W. The powder XRD analysis indicates textured growth of films along the c axis and a microstrain decrease with increasing deposition temperatures. The growth rate also decreases and the refractive index increases with increasing deposition temperature. The obtained patterns are explained by the ordering of the microstructure of the films with increasing deposition temperature due to increased mobility of atoms adsorbed on the substrate. It is shown by transmission electron microscopy and electron diffraction that the sample prepared at 200 °C is characterized by a lower disorientation of crystallites relative to the c axis than the samples deposited at 100 °C and 300 °C. For the sample prepared at 200 °C, the highest piezoresponse is qualitatively detected by piezoresponse force microscopy. The films exhibit two photoluminescence bands, the position and intensity of which do not depend on the growth temperature. The nature of defects corresponding to these bands is discussed.",
keywords = "aluminum nitride, pulsed magnetron sputtering, structural analysis, temperature dependence, thin films, нитрид алюминия, тонкие пленки, импульсное магнетронное распыление, структурный анализ, температурная зависимость",
author = "Bogoslovtseva, {A. L.} and Shayapov, {V. R.} and Chepkasov, {S. Y.} and Mironova, {M. I.} and Kapishnikov, {A. V.} and Marin, {D. V.} and Geidt, {P. V.}",
note = "Impact of Growth Temperature During Pulsed Magnetron Sputtering on the Structure and Defects of Aluminum Nitride Films / A. L. Bogoslovtseva, V. R. Shayapov, S. Y. Chepkasov [et al.] // Journal of Structural Chemistry. – 2026. – Vol. 67, No. 8. – P. 1704-1714. – DOI 10.1134/S0022476626080056. – EDN GWLIBN. The work was supported by the Minestry of Science and Higher Education of the Russian Federation (project No. FSUS-2024-0020). ",
year = "2026",
month = sep,
day = "4",
doi = "10.1134/S0022476626080056",
language = "English",
volume = "67",
pages = "1704--1714",
journal = "Journal of Structural Chemistry",
issn = "0022-4766",
publisher = "Springer",
number = "8",

}

RIS

TY - JOUR

T1 - Impact of Growth Temperature During Pulsed Magnetron Sputtering on the Structure and Defects of Aluminum Nitride Films

AU - Bogoslovtseva, A. L.

AU - Shayapov, V. R.

AU - Chepkasov, S. Y.

AU - Mironova, M. I.

AU - Kapishnikov, A. V.

AU - Marin, D. V.

AU - Geidt, P. V.

N1 - Impact of Growth Temperature During Pulsed Magnetron Sputtering on the Structure and Defects of Aluminum Nitride Films / A. L. Bogoslovtseva, V. R. Shayapov, S. Y. Chepkasov [et al.] // Journal of Structural Chemistry. – 2026. – Vol. 67, No. 8. – P. 1704-1714. – DOI 10.1134/S0022476626080056. – EDN GWLIBN. The work was supported by the Minestry of Science and Higher Education of the Russian Federation (project No. FSUS-2024-0020).

PY - 2026/9/4

Y1 - 2026/9/4

N2 - Structural features of aluminum nitride thin films, which are important for applications as a piezoelectric material, are studied. The films are grown by pulsed magnetron sputtering at deposition temperatures from 60 °C to 300 °C and a magnetron power of 300 W. The powder XRD analysis indicates textured growth of films along the c axis and a microstrain decrease with increasing deposition temperatures. The growth rate also decreases and the refractive index increases with increasing deposition temperature. The obtained patterns are explained by the ordering of the microstructure of the films with increasing deposition temperature due to increased mobility of atoms adsorbed on the substrate. It is shown by transmission electron microscopy and electron diffraction that the sample prepared at 200 °C is characterized by a lower disorientation of crystallites relative to the c axis than the samples deposited at 100 °C and 300 °C. For the sample prepared at 200 °C, the highest piezoresponse is qualitatively detected by piezoresponse force microscopy. The films exhibit two photoluminescence bands, the position and intensity of which do not depend on the growth temperature. The nature of defects corresponding to these bands is discussed.

AB - Structural features of aluminum nitride thin films, which are important for applications as a piezoelectric material, are studied. The films are grown by pulsed magnetron sputtering at deposition temperatures from 60 °C to 300 °C and a magnetron power of 300 W. The powder XRD analysis indicates textured growth of films along the c axis and a microstrain decrease with increasing deposition temperatures. The growth rate also decreases and the refractive index increases with increasing deposition temperature. The obtained patterns are explained by the ordering of the microstructure of the films with increasing deposition temperature due to increased mobility of atoms adsorbed on the substrate. It is shown by transmission electron microscopy and electron diffraction that the sample prepared at 200 °C is characterized by a lower disorientation of crystallites relative to the c axis than the samples deposited at 100 °C and 300 °C. For the sample prepared at 200 °C, the highest piezoresponse is qualitatively detected by piezoresponse force microscopy. The films exhibit two photoluminescence bands, the position and intensity of which do not depend on the growth temperature. The nature of defects corresponding to these bands is discussed.

KW - aluminum nitride

KW - pulsed magnetron sputtering

KW - structural analysis

KW - temperature dependence

KW - thin films

KW - нитрид алюминия

KW - тонкие пленки

KW - импульсное магнетронное распыление

KW - структурный анализ

KW - температурная зависимость

UR - https://www.mendeley.com/catalogue/be37854b-2978-3f73-b0b3-5f793c93cae1/

UR - https://www.scopus.com/pages/publications/105049330679

UR - https://elibrary.ru/item.asp?id=92014800

U2 - 10.1134/S0022476626080056

DO - 10.1134/S0022476626080056

M3 - Article

VL - 67

SP - 1704

EP - 1714

JO - Journal of Structural Chemistry

JF - Journal of Structural Chemistry

SN - 0022-4766

IS - 8

ER -

ID: 85458631