Research output: Contribution to journal › Article › peer-review
Laser Method for Studying Temperature Distribution within Yb:YAG Active Elements. / Kuptsov, Gleb V.; Konovalova, Alyona O.; Petrov, Vladimir A. et al.
In: Photonics, Vol. 9, No. 11, 805, 11.2022.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - Laser Method for Studying Temperature Distribution within Yb:YAG Active Elements
AU - Kuptsov, Gleb V.
AU - Konovalova, Alyona O.
AU - Petrov, Vladimir A.
AU - Laptev, Alexey V.
AU - Atuchin, Victor V.
AU - Petrov, Victor V.
N1 - Funding Information: This work was funded in part by the Russian Foundation for Basic Research (RFBR) (Project No. 20-02-00529-a) and the RF Ministry of Science and Higher Education (Project FWGU-2021-0005). This study was also supported by the Russian Science Foundation (project 21-19-00046, in part of Methodology, Writing—review and editing). Publisher Copyright: © 2022 by the authors.
PY - 2022/11
Y1 - 2022/11
N2 - Currently, laser systems based on active elements doped with Yb3+ with simultaneously high pulse repetition rates and high peak power are in demand for many applications. High thermal load of active elements is the primary limiting factor for average power scaling. Experimental investigation of temperature distribution in active elements is of particular importance for estimation of cooling efficiency and for thermal processes’ monitoring. In the present work, the method of dynamic laser thermometry is proposed for temperature distribution investigation within cryogenically cooled Yb3+-doped active elements. The method is based on the dependence of the Yb3+ ion absorption cross-section on temperature at a wavelength of 1030 nm. The method was tested to study the 2D temperature map of the Yb:YAG active element of the high-power, diode-pumped, cryogenically cooled laser amplifier. The best measurement accuracy ±3 K is achieved at the maximal temperature 176 K. The results of numerical simulation are in good agreement with the experimental data. On the basis of the investigation, the quality of the cooling system is evaluated. The advantages and other possible applications of the method are discussed.
AB - Currently, laser systems based on active elements doped with Yb3+ with simultaneously high pulse repetition rates and high peak power are in demand for many applications. High thermal load of active elements is the primary limiting factor for average power scaling. Experimental investigation of temperature distribution in active elements is of particular importance for estimation of cooling efficiency and for thermal processes’ monitoring. In the present work, the method of dynamic laser thermometry is proposed for temperature distribution investigation within cryogenically cooled Yb3+-doped active elements. The method is based on the dependence of the Yb3+ ion absorption cross-section on temperature at a wavelength of 1030 nm. The method was tested to study the 2D temperature map of the Yb:YAG active element of the high-power, diode-pumped, cryogenically cooled laser amplifier. The best measurement accuracy ±3 K is achieved at the maximal temperature 176 K. The results of numerical simulation are in good agreement with the experimental data. On the basis of the investigation, the quality of the cooling system is evaluated. The advantages and other possible applications of the method are discussed.
KW - solid state lasers
KW - temperature measurement
KW - thermal imaging
KW - ytterbium
UR - http://www.scopus.com/inward/record.url?scp=85141860884&partnerID=8YFLogxK
UR - https://www.mendeley.com/catalogue/cea07855-9656-3c2b-8b60-92a4b8b63918/
U2 - 10.3390/photonics9110805
DO - 10.3390/photonics9110805
M3 - Article
AN - SCOPUS:85141860884
VL - 9
JO - Photonics
JF - Photonics
SN - 2304-6732
IS - 11
M1 - 805
ER -
ID: 39470399