TY - JOUR

T1 - Laser Method for Studying Temperature Distribution within Yb:YAG Active Elements

AU - Kuptsov, Gleb V.

AU - Konovalova, Alyona O.

AU - Petrov, Vladimir A.

AU - Laptev, Alexey V.

AU - Atuchin, Victor V.

AU - Petrov, Victor V.

N1 - Funding Information: This work was funded in part by the Russian Foundation for Basic Research (RFBR) (Project No. 20-02-00529-a) and the RF Ministry of Science and Higher Education (Project FWGU-2021-0005). This study was also supported by the Russian Science Foundation (project 21-19-00046, in part of Methodology, Writing—review and editing). Publisher Copyright: © 2022 by the authors.

PY - 2022/11

Y1 - 2022/11

N2 - Currently, laser systems based on active elements doped with Yb3+ with simultaneously high pulse repetition rates and high peak power are in demand for many applications. High thermal load of active elements is the primary limiting factor for average power scaling. Experimental investigation of temperature distribution in active elements is of particular importance for estimation of cooling efficiency and for thermal processes’ monitoring. In the present work, the method of dynamic laser thermometry is proposed for temperature distribution investigation within cryogenically cooled Yb3+-doped active elements. The method is based on the dependence of the Yb3+ ion absorption cross-section on temperature at a wavelength of 1030 nm. The method was tested to study the 2D temperature map of the Yb:YAG active element of the high-power, diode-pumped, cryogenically cooled laser amplifier. The best measurement accuracy ±3 K is achieved at the maximal temperature 176 K. The results of numerical simulation are in good agreement with the experimental data. On the basis of the investigation, the quality of the cooling system is evaluated. The advantages and other possible applications of the method are discussed.

AB - Currently, laser systems based on active elements doped with Yb3+ with simultaneously high pulse repetition rates and high peak power are in demand for many applications. High thermal load of active elements is the primary limiting factor for average power scaling. Experimental investigation of temperature distribution in active elements is of particular importance for estimation of cooling efficiency and for thermal processes’ monitoring. In the present work, the method of dynamic laser thermometry is proposed for temperature distribution investigation within cryogenically cooled Yb3+-doped active elements. The method is based on the dependence of the Yb3+ ion absorption cross-section on temperature at a wavelength of 1030 nm. The method was tested to study the 2D temperature map of the Yb:YAG active element of the high-power, diode-pumped, cryogenically cooled laser amplifier. The best measurement accuracy ±3 K is achieved at the maximal temperature 176 K. The results of numerical simulation are in good agreement with the experimental data. On the basis of the investigation, the quality of the cooling system is evaluated. The advantages and other possible applications of the method are discussed.

KW - solid state lasers

KW - temperature measurement

KW - thermal imaging

KW - ytterbium

UR - http://www.scopus.com/inward/record.url?scp=85141860884&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/cea07855-9656-3c2b-8b60-92a4b8b63918/

U2 - 10.3390/photonics9110805

DO - 10.3390/photonics9110805

M3 - Article

AN - SCOPUS:85141860884

VL - 9

JO - Photonics

JF - Photonics

SN - 2304-6732

IS - 11

M1 - 805

ER -