Standard

Numerical Simulations of Swirling Water Jet Atomization: A Mesh Convergence Study. / Vozhakov, Ivan S.; Hrebtov, Mikhail Yu; Yavorsky, Nikolay I. и др.

в: Water (Switzerland), Том 15, № 14, 2552, 07.2023.

Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование

Harvard

Vozhakov, IS, Hrebtov, MY, Yavorsky, NI & Mullyadzhanov, RI 2023, 'Numerical Simulations of Swirling Water Jet Atomization: A Mesh Convergence Study', Water (Switzerland), Том. 15, № 14, 2552. https://doi.org/10.3390/w15142552

APA

Vozhakov, I. S., Hrebtov, M. Y., Yavorsky, N. I., & Mullyadzhanov, R. I. (2023). Numerical Simulations of Swirling Water Jet Atomization: A Mesh Convergence Study. Water (Switzerland), 15(14), [2552]. https://doi.org/10.3390/w15142552

Vancouver

Vozhakov IS, Hrebtov MY, Yavorsky NI, Mullyadzhanov RI. Numerical Simulations of Swirling Water Jet Atomization: A Mesh Convergence Study. Water (Switzerland). 2023 июль;15(14):2552. doi: 10.3390/w15142552

Author

Vozhakov, Ivan S. ; Hrebtov, Mikhail Yu ; Yavorsky, Nikolay I. и др. / Numerical Simulations of Swirling Water Jet Atomization: A Mesh Convergence Study. в: Water (Switzerland). 2023 ; Том 15, № 14.

BibTeX

@article{7b5caf8cb66549728647e49090a6bfb8,
title = "Numerical Simulations of Swirling Water Jet Atomization: A Mesh Convergence Study",
abstract = "We report on numerical simulations of a swirling water jet flowing out of a nozzle into a still air atmosphere at normal conditions. Primary jet breakup and atomization were studied with an emphasis on the effect of grid resolution on the results. Jet inlet diameter D was set to 0.8 mm, a bulk velocity was set to 7.6 m/s ((Formula presented.), (Formula presented.)), and the swirl rate was set to (Formula presented.). The near region of the jet (up to (Formula presented.)) was studied. The results were obtained for four different grid resolutions with the smallest cell size of 6 (Formula presented.) m. It is shown that the use of an adaptive mesh refinement procedure for interface tracking allows us to get to convergent results in terms of both droplets volume and surface area distributions, while the total number of droplets changes with the increased grid refinement level. This phenomenon may be attributed to the formation of small (grid-cell sized) droplets due to numerically-triggered instabilities at the gas-liquid interface.",
keywords = "direct numerical simulation, primary atomization, swirling flow",
author = "Vozhakov, {Ivan S.} and Hrebtov, {Mikhail Yu} and Yavorsky, {Nikolay I.} and Mullyadzhanov, {Rustam I.}",
note = "The study was supported by the Russian Science Foundation grant No. 22-79-10246.",
year = "2023",
month = jul,
doi = "10.3390/w15142552",
language = "English",
volume = "15",
journal = "Water (Switzerland)",
issn = "2073-4441",
publisher = "MDPI AG",
number = "14",

}

RIS

TY - JOUR

T1 - Numerical Simulations of Swirling Water Jet Atomization: A Mesh Convergence Study

AU - Vozhakov, Ivan S.

AU - Hrebtov, Mikhail Yu

AU - Yavorsky, Nikolay I.

AU - Mullyadzhanov, Rustam I.

N1 - The study was supported by the Russian Science Foundation grant No. 22-79-10246.

PY - 2023/7

Y1 - 2023/7

N2 - We report on numerical simulations of a swirling water jet flowing out of a nozzle into a still air atmosphere at normal conditions. Primary jet breakup and atomization were studied with an emphasis on the effect of grid resolution on the results. Jet inlet diameter D was set to 0.8 mm, a bulk velocity was set to 7.6 m/s ((Formula presented.), (Formula presented.)), and the swirl rate was set to (Formula presented.). The near region of the jet (up to (Formula presented.)) was studied. The results were obtained for four different grid resolutions with the smallest cell size of 6 (Formula presented.) m. It is shown that the use of an adaptive mesh refinement procedure for interface tracking allows us to get to convergent results in terms of both droplets volume and surface area distributions, while the total number of droplets changes with the increased grid refinement level. This phenomenon may be attributed to the formation of small (grid-cell sized) droplets due to numerically-triggered instabilities at the gas-liquid interface.

AB - We report on numerical simulations of a swirling water jet flowing out of a nozzle into a still air atmosphere at normal conditions. Primary jet breakup and atomization were studied with an emphasis on the effect of grid resolution on the results. Jet inlet diameter D was set to 0.8 mm, a bulk velocity was set to 7.6 m/s ((Formula presented.), (Formula presented.)), and the swirl rate was set to (Formula presented.). The near region of the jet (up to (Formula presented.)) was studied. The results were obtained for four different grid resolutions with the smallest cell size of 6 (Formula presented.) m. It is shown that the use of an adaptive mesh refinement procedure for interface tracking allows us to get to convergent results in terms of both droplets volume and surface area distributions, while the total number of droplets changes with the increased grid refinement level. This phenomenon may be attributed to the formation of small (grid-cell sized) droplets due to numerically-triggered instabilities at the gas-liquid interface.

KW - direct numerical simulation

KW - primary atomization

KW - swirling flow

UR - https://www.scopus.com/record/display.uri?eid=2-s2.0-85166260341&origin=inward&txGid=d8409a8c2ae8f5494f2b275dbf1da32a

UR - https://www.mendeley.com/catalogue/4f8d6656-da4d-3f21-8581-24119d9253d2/

U2 - 10.3390/w15142552

DO - 10.3390/w15142552

M3 - Article

VL - 15

JO - Water (Switzerland)

JF - Water (Switzerland)

SN - 2073-4441

IS - 14

M1 - 2552

ER -

ID: 59258879