Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
Study of the applicability of nano-polycrystalline diamond as a material for refractive x-ray lenses. / Snigireva, I.; Irifune, T.; Shinmei, T. et al.
Advances in X-Ray/EUV Optics and Components XVI. ed. / Christian Morawe; Ali M. Khounsary; Shunji Goto. SPIE, 2021. 1183703 (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 11837).Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › Research › peer-review
}
TY - GEN
T1 - Study of the applicability of nano-polycrystalline diamond as a material for refractive x-ray lenses
AU - Snigireva, I.
AU - Irifune, T.
AU - Shinmei, T.
AU - Medvedskaya, P.
AU - Lyatun, Ivan
AU - Shevyrtalov, S.
AU - Bourenkov, G.
AU - Polikarpov, M.
AU - Rashchenko, S.
AU - Snigirev, A.
N1 - Funding Information: This research was supported by the Russian Science Foundation (Project No. 19-72-30009). We gratefully acknowledge ESRF ID22 (A. Fitch) and ID02 (T. Narayanan, T. Zinn) for the experimental support. Publisher Copyright: Copyright © 2021 SPIE.
PY - 2021
Y1 - 2021
N2 - The study of the applicability of a nano-polycrystalline diamond (NPD) as a lens material is presented. Two NPD plates with a diameter of 8 mm and a thickness of 0.1 and 1 mm were manufactured using the HPHT process. Coherence preservation properties of the NPD samples were checked using in-line phase-contrast imaging. Wide-Angle X-ray Scattering and Small Angle X-ray Scattering experiments were performed to examine the NPD scattering properties. Rotationally parabolic half-lens from a 100 μm thick NPD plate was manufactured using the maskless direct milling using a Zeiss CrossBeam 540 FIB-SEM system.
AB - The study of the applicability of a nano-polycrystalline diamond (NPD) as a lens material is presented. Two NPD plates with a diameter of 8 mm and a thickness of 0.1 and 1 mm were manufactured using the HPHT process. Coherence preservation properties of the NPD samples were checked using in-line phase-contrast imaging. Wide-Angle X-ray Scattering and Small Angle X-ray Scattering experiments were performed to examine the NPD scattering properties. Rotationally parabolic half-lens from a 100 μm thick NPD plate was manufactured using the maskless direct milling using a Zeiss CrossBeam 540 FIB-SEM system.
KW - diamond plates
KW - nano-polycrystalline diamond
KW - x-ray refractive optics
UR - http://www.scopus.com/inward/record.url?scp=85118725205&partnerID=8YFLogxK
U2 - 10.1117/12.2594675
DO - 10.1117/12.2594675
M3 - Conference contribution
AN - SCOPUS:85118725205
T3 - Proceedings of SPIE - The International Society for Optical Engineering
BT - Advances in X-Ray/EUV Optics and Components XVI
A2 - Morawe, Christian
A2 - Khounsary, Ali M.
A2 - Goto, Shunji
PB - SPIE
T2 - Advances in X-Ray/EUV Optics and Components XVI 2021
Y2 - 1 August 2021 through 5 August 2021
ER -
ID: 34641817