Research output: Contribution to conference › Paper › peer-review
Numerical simulation of faults formation using the discrete element method. / Lisitsa, Vadim; Kolyukhin, Dmitriy; Tcheverda, Vladimir et al.
2020. 3319-3323 Paper presented at Society of Exploration Geophysicists International Exposition and Annual Meeting 2019, SEG 2019, San Antonio, United States.Research output: Contribution to conference › Paper › peer-review
}
TY - CONF
T1 - Numerical simulation of faults formation using the discrete element method
AU - Lisitsa, Vadim
AU - Kolyukhin, Dmitriy
AU - Tcheverda, Vladimir
AU - Volianskaia, Victoria
N1 - Funding Information: Development of the DEM algorithm was done by V. Lisitsa in IM SB RAS under the support of the Russian Science Foundation grant no. 19-77-20004, generation of the models with embedded faults was done by V. Lisitsa in IPGG SB RAS under Russian President grant MD-20.2019.5, statistical analysis of the results are done by D. Kolyukhin under the support of RFBR grant no 18-05-00031, V. Tcheverda did the numerical simulations, and V.Volianskaia made the geological interpretation. Numerical simulations were done using cluster НКС-30Т+GPU of the Siberian Supercomputer Center. Publisher Copyright: © 2019 SEG Copyright: Copyright 2020 Elsevier B.V., All rights reserved.
PY - 2020/1/1
Y1 - 2020/1/1
N2 - In this paper, we present an approach to numerical simulation of geological fault formation. The approach is based on the discrete element methods (DEM), so that media are represented as a set of distinct elastic particles. This approach allows the simulation of finite deformations, fracturing, and fault formation. Note, that in DEM simulations one does not need to prearrange the fault position and geometry. Moreover, this approach allows reproducing all main structural features of faults, such as fault core, near-fault damage zones, inter-faults damage zones, etc.
AB - In this paper, we present an approach to numerical simulation of geological fault formation. The approach is based on the discrete element methods (DEM), so that media are represented as a set of distinct elastic particles. This approach allows the simulation of finite deformations, fracturing, and fault formation. Note, that in DEM simulations one does not need to prearrange the fault position and geometry. Moreover, this approach allows reproducing all main structural features of faults, such as fault core, near-fault damage zones, inter-faults damage zones, etc.
UR - http://www.scopus.com/inward/record.url?scp=85079477846&partnerID=8YFLogxK
U2 - 10.1190/segam2019-3215975.1
DO - 10.1190/segam2019-3215975.1
M3 - Paper
AN - SCOPUS:85079477846
SP - 3319
EP - 3323
T2 - Society of Exploration Geophysicists International Exposition and Annual Meeting 2019, SEG 2019
Y2 - 15 September 2019 through 20 September 2019
ER -
ID: 26069915