Standard

Nanosecond laser-induced crystallization of SiOx/Au bilayers in air and vacuum. / Samokhvalov, Faddey; Zamchiy, Alexandr; Baranov, Evgeniy et al.

In: Optics and Laser Technology, Vol. 179, 111286, 12.2024.

Research output: Contribution to journalArticlepeer-review

Harvard

APA

Vancouver

Samokhvalov F, Zamchiy A, Baranov E, Fedotov A, Starinskaya E, Volodin V et al. Nanosecond laser-induced crystallization of SiOx/Au bilayers in air and vacuum. Optics and Laser Technology. 2024 Dec;179:111286. doi: 10.1016/j.optlastec.2024.111286

Author

Samokhvalov, Faddey ; Zamchiy, Alexandr ; Baranov, Evgeniy et al. / Nanosecond laser-induced crystallization of SiOx/Au bilayers in air and vacuum. In: Optics and Laser Technology. 2024 ; Vol. 179.

BibTeX

@article{1914fb86f4bf41f5aee10d8bf174c981,
title = "Nanosecond laser-induced crystallization of SiOx/Au bilayers in air and vacuum",
abstract = "High-quality polycrystalline silicon films on low-cost and low-temperature substrates have attracted much attention as promising materials for high-speed thin-film transistors and thin-film solar cells fabrication. To obtain poly-Si films on low temperature substrates, several concepts have been proposed. Usually the amorphous material undergoes crystallization which can be achieved by various methods including solid-phase crystallization, metal-induced crystallization or liquid-phase crystallization. In this work, we tried to combine the advantages of metal-induced crystallization and liquid-phase crystallization. To achieve this we explored the nanosecond laser crystallization of a bilayer structure consisting of Au and SiO0.1 layers with thicknesses of 30 nm and 130 nm, respectively. The study reveals that when exposed to 532 nm wavelength radiation leads to its destruction due to rupture. On the other hand, when subjected to 1064 nm wavelength radiation, no similar material behavior is observed, and the measured modification threshold is 0.15 J/cm2, representing a 40 % reduction compared to SiO0.1 film without gold. It is demonstrated that at laser fluences of 0.35 J/cm2 and higher, the treated surface in air becomes enriched with silicon dioxide nanoporous coating, attributed to the return of evaporation products to the target surface. Theoretical modeling, assuming thermal evaporation of the coating, suggests that the undesirable nanoporous layer formation can be avoided.",
keywords = "Gold-induced crystallization, Laser crystallization, Laser procccesing, Phase transformation, Silicon suboxide, Thin films",
author = "Faddey Samokhvalov and Alexandr Zamchiy and Evgeniy Baranov and Alexander Fedotov and Elena Starinskaya and Vladimir Volodin and Tagiara, {Nagia S.} and Sergey Starinskiy",
note = "The laser-annealing study was carried out under the financial support from the Russian Foundation for Basic Research and Belarusian Republican Foundation for Fundamental Research (Grant No. 20-58-04021); the synthesis of Au and SiO x films and the study of their properties were supported by the Russian Science Foundation (Grant No. 22-79-10079, https://rscf.ru/project/22-79-10079/).",
year = "2024",
month = dec,
doi = "10.1016/j.optlastec.2024.111286",
language = "English",
volume = "179",
journal = "Optics and Laser Technology",
issn = "0030-3992",
publisher = "Elsevier Ltd",

}

RIS

TY - JOUR

T1 - Nanosecond laser-induced crystallization of SiOx/Au bilayers in air and vacuum

AU - Samokhvalov, Faddey

AU - Zamchiy, Alexandr

AU - Baranov, Evgeniy

AU - Fedotov, Alexander

AU - Starinskaya, Elena

AU - Volodin, Vladimir

AU - Tagiara, Nagia S.

AU - Starinskiy, Sergey

N1 - The laser-annealing study was carried out under the financial support from the Russian Foundation for Basic Research and Belarusian Republican Foundation for Fundamental Research (Grant No. 20-58-04021); the synthesis of Au and SiO x films and the study of their properties were supported by the Russian Science Foundation (Grant No. 22-79-10079, https://rscf.ru/project/22-79-10079/).

PY - 2024/12

Y1 - 2024/12

N2 - High-quality polycrystalline silicon films on low-cost and low-temperature substrates have attracted much attention as promising materials for high-speed thin-film transistors and thin-film solar cells fabrication. To obtain poly-Si films on low temperature substrates, several concepts have been proposed. Usually the amorphous material undergoes crystallization which can be achieved by various methods including solid-phase crystallization, metal-induced crystallization or liquid-phase crystallization. In this work, we tried to combine the advantages of metal-induced crystallization and liquid-phase crystallization. To achieve this we explored the nanosecond laser crystallization of a bilayer structure consisting of Au and SiO0.1 layers with thicknesses of 30 nm and 130 nm, respectively. The study reveals that when exposed to 532 nm wavelength radiation leads to its destruction due to rupture. On the other hand, when subjected to 1064 nm wavelength radiation, no similar material behavior is observed, and the measured modification threshold is 0.15 J/cm2, representing a 40 % reduction compared to SiO0.1 film without gold. It is demonstrated that at laser fluences of 0.35 J/cm2 and higher, the treated surface in air becomes enriched with silicon dioxide nanoporous coating, attributed to the return of evaporation products to the target surface. Theoretical modeling, assuming thermal evaporation of the coating, suggests that the undesirable nanoporous layer formation can be avoided.

AB - High-quality polycrystalline silicon films on low-cost and low-temperature substrates have attracted much attention as promising materials for high-speed thin-film transistors and thin-film solar cells fabrication. To obtain poly-Si films on low temperature substrates, several concepts have been proposed. Usually the amorphous material undergoes crystallization which can be achieved by various methods including solid-phase crystallization, metal-induced crystallization or liquid-phase crystallization. In this work, we tried to combine the advantages of metal-induced crystallization and liquid-phase crystallization. To achieve this we explored the nanosecond laser crystallization of a bilayer structure consisting of Au and SiO0.1 layers with thicknesses of 30 nm and 130 nm, respectively. The study reveals that when exposed to 532 nm wavelength radiation leads to its destruction due to rupture. On the other hand, when subjected to 1064 nm wavelength radiation, no similar material behavior is observed, and the measured modification threshold is 0.15 J/cm2, representing a 40 % reduction compared to SiO0.1 film without gold. It is demonstrated that at laser fluences of 0.35 J/cm2 and higher, the treated surface in air becomes enriched with silicon dioxide nanoporous coating, attributed to the return of evaporation products to the target surface. Theoretical modeling, assuming thermal evaporation of the coating, suggests that the undesirable nanoporous layer formation can be avoided.

KW - Gold-induced crystallization

KW - Laser crystallization

KW - Laser procccesing

KW - Phase transformation

KW - Silicon suboxide

KW - Thin films

UR - https://www.scopus.com/record/display.uri?eid=2-s2.0-85196061305&origin=inward&txGid=883c484d52367f1fe9c82080d424239a

UR - https://www.mendeley.com/catalogue/5743f4e0-bc63-3403-aac4-67a1d954ec61/

U2 - 10.1016/j.optlastec.2024.111286

DO - 10.1016/j.optlastec.2024.111286

M3 - Article

VL - 179

JO - Optics and Laser Technology

JF - Optics and Laser Technology

SN - 0030-3992

M1 - 111286

ER -

ID: 60383625