Standard

Data acquisition system for Belle II electromagnetic calorimeter. / Kuzmin, A.; Remnev, M.; Matvienko, D. et al.

In: Journal of Instrumentation, Vol. 15, No. 7, C07020, 01.07.2020.

Research output: Contribution to journal › Article › peer-review

Harvard

Kuzmin, A, Remnev, M, Matvienko, D, Usov, Y & Zhulanov, V 2020, 'Data acquisition system for Belle II electromagnetic calorimeter', Journal of Instrumentation, vol. 15, no. 7, C07020. https://doi.org/10.1088/1748-0221/15/07/C07020

APA

Kuzmin, A., Remnev, M., Matvienko, D., Usov, Y., & Zhulanov, V. (2020). Data acquisition system for Belle II electromagnetic calorimeter. Journal of Instrumentation, 15(7), [C07020]. https://doi.org/10.1088/1748-0221/15/07/C07020

Vancouver

Kuzmin A, Remnev M, Matvienko D, Usov Y, Zhulanov V. Data acquisition system for Belle II electromagnetic calorimeter. Journal of Instrumentation. 2020 Jul 1;15(7):C07020. doi: 10.1088/1748-0221/15/07/C07020

Author

Kuzmin, A. ; Remnev, M. ; Matvienko, D. et al. / Data acquisition system for Belle II electromagnetic calorimeter. In: Journal of Instrumentation. 2020 ; Vol. 15, No. 7.

BibTeX

@article{414ebf2000234c19a028647fe66386e8,
title = "Data acquisition system for Belle II electromagnetic calorimeter",
abstract = "Since 2018, the Belle II experiment has been running at KEK, at the SuperKEKB B-factory, with all detector subsystems taking data. One of the important detector systems is an electromagnetic calorimeter (ECL) that includes 8736 counters based on CsI(Tl) scintillation crystals. This report describes the data acquisition (DAQ) system that has been developed for ECL. Front-end electronics of ECL DAQ consist of several hundred highly configurable FPGA-controlled modules that utilize pipeline readout architecture and are able to handle a trigger rate up to 30 kHz. ECL front end electronics are initialized, configured and monitored by ECL DAQ software. The initialization library can work with several transport protocols, internally optimize requests to the electronics and perform caching of the configuration data. Configuration software manages and monitors more than 105 electronics parameters and updates them based on the calibrations. Continuous monitoring of ECL data quality is also implemented. ",
keywords = "Calorimeters, Data acquisition concepts, Detector control systems (detector and experiment monitoring and slow-control systems, architecture, hardware, algorithms, databases)",
author = "A. Kuzmin and M. Remnev and D. Matvienko and Y. Usov and V. Zhulanov",
year = "2020",
month = jul,
day = "1",
doi = "10.1088/1748-0221/15/07/C07020",
language = "English",
volume = "15",
journal = "Journal of Instrumentation",
issn = "1748-0221",
publisher = "IOP Publishing Ltd.",
number = "7",

}

RIS

TY - JOUR

T1 - Data acquisition system for Belle II electromagnetic calorimeter

AU - Kuzmin, A.

AU - Remnev, M.

AU - Matvienko, D.

AU - Usov, Y.

AU - Zhulanov, V.

PY - 2020/7/1

Y1 - 2020/7/1

N2 - Since 2018, the Belle II experiment has been running at KEK, at the SuperKEKB B-factory, with all detector subsystems taking data. One of the important detector systems is an electromagnetic calorimeter (ECL) that includes 8736 counters based on CsI(Tl) scintillation crystals. This report describes the data acquisition (DAQ) system that has been developed for ECL. Front-end electronics of ECL DAQ consist of several hundred highly configurable FPGA-controlled modules that utilize pipeline readout architecture and are able to handle a trigger rate up to 30 kHz. ECL front end electronics are initialized, configured and monitored by ECL DAQ software. The initialization library can work with several transport protocols, internally optimize requests to the electronics and perform caching of the configuration data. Configuration software manages and monitors more than 105 electronics parameters and updates them based on the calibrations. Continuous monitoring of ECL data quality is also implemented.

AB - Since 2018, the Belle II experiment has been running at KEK, at the SuperKEKB B-factory, with all detector subsystems taking data. One of the important detector systems is an electromagnetic calorimeter (ECL) that includes 8736 counters based on CsI(Tl) scintillation crystals. This report describes the data acquisition (DAQ) system that has been developed for ECL. Front-end electronics of ECL DAQ consist of several hundred highly configurable FPGA-controlled modules that utilize pipeline readout architecture and are able to handle a trigger rate up to 30 kHz. ECL front end electronics are initialized, configured and monitored by ECL DAQ software. The initialization library can work with several transport protocols, internally optimize requests to the electronics and perform caching of the configuration data. Configuration software manages and monitors more than 105 electronics parameters and updates them based on the calibrations. Continuous monitoring of ECL data quality is also implemented.

KW - Calorimeters

KW - Data acquisition concepts

KW - Detector control systems (detector and experiment monitoring and slow-control systems, architecture, hardware, algorithms, databases)

UR - http://www.scopus.com/inward/record.url?scp=85088570410&partnerID=8YFLogxK

U2 - 10.1088/1748-0221/15/07/C07020

DO - 10.1088/1748-0221/15/07/C07020

M3 - Article

AN - SCOPUS:85088570410

VL - 15

JO - Journal of Instrumentation

JF - Journal of Instrumentation

SN - 1748-0221

IS - 7

M1 - C07020

ER -

ID: 24833736