Standard

Viscosity of haplokimberlitic and basaltic melts at high pressures : Experimental and theoretical studies. / Persikov, Eduard S.; Bukhtiyarov, Pavel G.; Sokol, Alexander G.

в: Chemical Geology, Том 497, 10.10.2018, стр. 54-63.

Результаты исследований: Научные публикации в периодических изданияхстатьяРецензирование

Harvard

APA

Vancouver

Persikov ES, Bukhtiyarov PG, Sokol AG. Viscosity of haplokimberlitic and basaltic melts at high pressures: Experimental and theoretical studies. Chemical Geology. 2018 окт. 10;497:54-63. doi: 10.1016/j.chemgeo.2018.08.021

Author

Persikov, Eduard S. ; Bukhtiyarov, Pavel G. ; Sokol, Alexander G. / Viscosity of haplokimberlitic and basaltic melts at high pressures : Experimental and theoretical studies. в: Chemical Geology. 2018 ; Том 497. стр. 54-63.

BibTeX

@article{764dbfc9c94c4422a0ec50b2e6325fef,
title = "Viscosity of haplokimberlitic and basaltic melts at high pressures: Experimental and theoretical studies",
abstract = "Only limited data are available at present on the viscosity of kimberlite magmas. We investigate viscosity of synthetic carbonate-bearing (silicate82 + carbonate18, wt%, 100NBO/T = 313) anhydrous haplokimberlite melts theoretically and in experiments. We use new experimental data on viscosity of anhydrous haplokimberlite melts and a physical-chemical model (Persikov and Bukhtiyarov 2009; Persikov et al. 2015) to compare basic viscosity features in kimberlitic and basaltic melts (100NBO/T = 56). Viscosity of melts is determined by the falling sphere quenching method in a large range of temperatures from 1300 to 1950 °C and pressures up to 7.5 GPa. We use two types of high-pressure apparatuses: a high gas pressure apparatus and a high pressure split-sphere multi-anvil apparatus to study the viscosity of melts at moderate (100 MPa CO2 pressure) and high (5.5 GPa and 7.5 GPa) pressures, respectively. The measured viscosity ranges for anhydrous haplokimberlite melts are from 1.5 (±0.45) to 0.11(±0.03) Pa s. The temperature dependence of the viscosity of haplokimberlite and basaltic melts is consistent with the theoretical Arrhenian equation. At a constant temperature, viscosity of anhydrous haplokimberlite melts increases exponentially about ten-fold as pressure increases from 100 MPa to 7.5 GPa. The activation energy of viscous flow increases linearly with pressure increase from 100 MPa to 7.5 GPa for anhydrous haplokimberlite melts but decreases in the case of basaltic melts, with the minimum at ~5.5 GPa. At a moderate pressure (100 MPa), haplokimberlite melts are about twenty times less viscous than basaltic melts, but are about four times more viscous at a high pressure (7.5 GPa), the temperature being 1800 °C in both cases. The experimentally observed behavior of the viscosity of anhydrous haplokimberlite melts is consistent with predictions of the physical-chemical model within the range of uncertainties in both experimental and calculated data (±30% rel.). Thus, the physical-chemical model is used to discuss possible effects of volume percentages of crystals and bubbles on viscosity of kimberlitic and basaltic magmas at different pressures and temperatures during their origin, evolution, and ascent.",
keywords = "Activation energy, Haplokimberlite and basaltic melts, High temperatures and pressures, Model, Sphere, Viscosity, MAGMATIC SILICATE LIQUIDS, RHEOLOGY, MODEL, KIMBERLITE, SOLUBILITY, DEPENDENCE, TEMPERATURE, GPA, GENERATION, OLIVINE",
author = "Persikov, {Eduard S.} and Bukhtiyarov, {Pavel G.} and Sokol, {Alexander G.}",
year = "2018",
month = oct,
day = "10",
doi = "10.1016/j.chemgeo.2018.08.021",
language = "English",
volume = "497",
pages = "54--63",
journal = "Chemical Geology",
issn = "0009-2541",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Viscosity of haplokimberlitic and basaltic melts at high pressures

T2 - Experimental and theoretical studies

AU - Persikov, Eduard S.

AU - Bukhtiyarov, Pavel G.

AU - Sokol, Alexander G.

PY - 2018/10/10

Y1 - 2018/10/10

N2 - Only limited data are available at present on the viscosity of kimberlite magmas. We investigate viscosity of synthetic carbonate-bearing (silicate82 + carbonate18, wt%, 100NBO/T = 313) anhydrous haplokimberlite melts theoretically and in experiments. We use new experimental data on viscosity of anhydrous haplokimberlite melts and a physical-chemical model (Persikov and Bukhtiyarov 2009; Persikov et al. 2015) to compare basic viscosity features in kimberlitic and basaltic melts (100NBO/T = 56). Viscosity of melts is determined by the falling sphere quenching method in a large range of temperatures from 1300 to 1950 °C and pressures up to 7.5 GPa. We use two types of high-pressure apparatuses: a high gas pressure apparatus and a high pressure split-sphere multi-anvil apparatus to study the viscosity of melts at moderate (100 MPa CO2 pressure) and high (5.5 GPa and 7.5 GPa) pressures, respectively. The measured viscosity ranges for anhydrous haplokimberlite melts are from 1.5 (±0.45) to 0.11(±0.03) Pa s. The temperature dependence of the viscosity of haplokimberlite and basaltic melts is consistent with the theoretical Arrhenian equation. At a constant temperature, viscosity of anhydrous haplokimberlite melts increases exponentially about ten-fold as pressure increases from 100 MPa to 7.5 GPa. The activation energy of viscous flow increases linearly with pressure increase from 100 MPa to 7.5 GPa for anhydrous haplokimberlite melts but decreases in the case of basaltic melts, with the minimum at ~5.5 GPa. At a moderate pressure (100 MPa), haplokimberlite melts are about twenty times less viscous than basaltic melts, but are about four times more viscous at a high pressure (7.5 GPa), the temperature being 1800 °C in both cases. The experimentally observed behavior of the viscosity of anhydrous haplokimberlite melts is consistent with predictions of the physical-chemical model within the range of uncertainties in both experimental and calculated data (±30% rel.). Thus, the physical-chemical model is used to discuss possible effects of volume percentages of crystals and bubbles on viscosity of kimberlitic and basaltic magmas at different pressures and temperatures during their origin, evolution, and ascent.

AB - Only limited data are available at present on the viscosity of kimberlite magmas. We investigate viscosity of synthetic carbonate-bearing (silicate82 + carbonate18, wt%, 100NBO/T = 313) anhydrous haplokimberlite melts theoretically and in experiments. We use new experimental data on viscosity of anhydrous haplokimberlite melts and a physical-chemical model (Persikov and Bukhtiyarov 2009; Persikov et al. 2015) to compare basic viscosity features in kimberlitic and basaltic melts (100NBO/T = 56). Viscosity of melts is determined by the falling sphere quenching method in a large range of temperatures from 1300 to 1950 °C and pressures up to 7.5 GPa. We use two types of high-pressure apparatuses: a high gas pressure apparatus and a high pressure split-sphere multi-anvil apparatus to study the viscosity of melts at moderate (100 MPa CO2 pressure) and high (5.5 GPa and 7.5 GPa) pressures, respectively. The measured viscosity ranges for anhydrous haplokimberlite melts are from 1.5 (±0.45) to 0.11(±0.03) Pa s. The temperature dependence of the viscosity of haplokimberlite and basaltic melts is consistent with the theoretical Arrhenian equation. At a constant temperature, viscosity of anhydrous haplokimberlite melts increases exponentially about ten-fold as pressure increases from 100 MPa to 7.5 GPa. The activation energy of viscous flow increases linearly with pressure increase from 100 MPa to 7.5 GPa for anhydrous haplokimberlite melts but decreases in the case of basaltic melts, with the minimum at ~5.5 GPa. At a moderate pressure (100 MPa), haplokimberlite melts are about twenty times less viscous than basaltic melts, but are about four times more viscous at a high pressure (7.5 GPa), the temperature being 1800 °C in both cases. The experimentally observed behavior of the viscosity of anhydrous haplokimberlite melts is consistent with predictions of the physical-chemical model within the range of uncertainties in both experimental and calculated data (±30% rel.). Thus, the physical-chemical model is used to discuss possible effects of volume percentages of crystals and bubbles on viscosity of kimberlitic and basaltic magmas at different pressures and temperatures during their origin, evolution, and ascent.

KW - Activation energy

KW - Haplokimberlite and basaltic melts

KW - High temperatures and pressures

KW - Model

KW - Sphere

KW - Viscosity

KW - MAGMATIC SILICATE LIQUIDS

KW - RHEOLOGY

KW - MODEL

KW - KIMBERLITE

KW - SOLUBILITY

KW - DEPENDENCE

KW - TEMPERATURE

KW - GPA

KW - GENERATION

KW - OLIVINE

UR - http://www.scopus.com/inward/record.url?scp=85052726231&partnerID=8YFLogxK

U2 - 10.1016/j.chemgeo.2018.08.021

DO - 10.1016/j.chemgeo.2018.08.021

M3 - Article

AN - SCOPUS:85052726231

VL - 497

SP - 54

EP - 63

JO - Chemical Geology

JF - Chemical Geology

SN - 0009-2541

ER -

ID: 16330757