Результаты исследований: Научные публикации в периодических изданиях › статья по материалам конференции › Рецензирование
The effect of the nanodiamonds additive on ionic conductivity of silver iodide. / Mateyshina, Yulia; Alekseev, Dmitriy; Uvarov, Nikolai.
в: Materials Today: Proceedings, Том 25, 01.10.2019, стр. 373-376.Результаты исследований: Научные публикации в периодических изданиях › статья по материалам конференции › Рецензирование
}
TY - JOUR
T1 - The effect of the nanodiamonds additive on ionic conductivity of silver iodide
AU - Mateyshina, Yulia
AU - Alekseev, Dmitriy
AU - Uvarov, Nikolai
PY - 2019/10/1
Y1 - 2019/10/1
N2 - Composite solid electrolytes AgI-CND (CND is nanodiamonds powder) were prepared and their properties were investigated by methods of X-ray diffraction, differential scanning calorimetry (DSC) and impedance spectroscopy. It was found that the addition of CND results in a strong increase in the ionic conductivity of AgI at temperatures below phase transition to the α-AgI phase. According to the results of DSC, no strong changes in thermodynamic properties of the salt in the composites occur. Therefore, in contrast to the AgI-oxide composites, the most probable reason of the conductivity increase in AgI-CND composites is formation of stable network of intergrains and anti-phase domain boundaries acting as conductivity pathways in the composites. Due to the particle-reinforcement effect on nanodiamond particles the AgI matrix in the composites may undergo strong local stresses leading to the stabilization of the polytypes. The peaks of such phases are detected in X-ray diffractograms of the composites. The maximum conductivity of AgI-CND composites, 5.6·10-4 S/cm at 31 °C observed in the composites containing 80 mol % CND, is comparable to the best values obtained for oxide-based composites with silver iodide. Thus, nanodiamonds is the first non-oxide additive which caused a strong enhancement of the ionic conductivity of AgI low temperatures.
AB - Composite solid electrolytes AgI-CND (CND is nanodiamonds powder) were prepared and their properties were investigated by methods of X-ray diffraction, differential scanning calorimetry (DSC) and impedance spectroscopy. It was found that the addition of CND results in a strong increase in the ionic conductivity of AgI at temperatures below phase transition to the α-AgI phase. According to the results of DSC, no strong changes in thermodynamic properties of the salt in the composites occur. Therefore, in contrast to the AgI-oxide composites, the most probable reason of the conductivity increase in AgI-CND composites is formation of stable network of intergrains and anti-phase domain boundaries acting as conductivity pathways in the composites. Due to the particle-reinforcement effect on nanodiamond particles the AgI matrix in the composites may undergo strong local stresses leading to the stabilization of the polytypes. The peaks of such phases are detected in X-ray diffractograms of the composites. The maximum conductivity of AgI-CND composites, 5.6·10-4 S/cm at 31 °C observed in the composites containing 80 mol % CND, is comparable to the best values obtained for oxide-based composites with silver iodide. Thus, nanodiamonds is the first non-oxide additive which caused a strong enhancement of the ionic conductivity of AgI low temperatures.
KW - Article reinforcement effect
KW - Composite solid electrolyte
KW - Enhanced ionic conductivity
KW - Nanodiamonds
KW - Silver iodide
KW - ROOM-TEMPERATURE
KW - PHASES
KW - THERMODYNAMIC PROPERTIES
KW - AGI
KW - STABILIZATION
KW - COMPOSITES
KW - UNUSUAL TRANSPORT
KW - STRUCTURAL-PROPERTIES
UR - http://www.scopus.com/inward/record.url?scp=85086907003&partnerID=8YFLogxK
U2 - 10.1016/j.matpr.2019.12.094
DO - 10.1016/j.matpr.2019.12.094
M3 - Conference article
AN - SCOPUS:85086907003
VL - 25
SP - 373
EP - 376
JO - Materials Today: Proceedings
JF - Materials Today: Proceedings
SN - 2214-7853
T2 - 3rd All-Russian Conference, with International Participation Hot Topics of Solid State Chemistry : From New Ideas to New Materials, HTSSC 2019
Y2 - 1 October 2019 through 5 October 2019
ER -
ID: 24613417