Standard

Qualification of Boron Carbide Ceramics for Use in ITER Ports. / Shoshin, Andrey; Burdakov, Alexander; Ivantsivskiy, Maxim и др.

в: IEEE Transactions on Plasma Science, Том 48, № 6, 8827588, 01.06.2020, стр. 1474-1478.

Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование

Harvard

Shoshin, A, Burdakov, A, Ivantsivskiy, M, Polosatkin, S, Klimenko, M, Semenov, A, Taskaev, S, Kasatov, D, Shchudlo, I, Makarov, A & Davydov, N 2020, 'Qualification of Boron Carbide Ceramics for Use in ITER Ports', IEEE Transactions on Plasma Science, Том. 48, № 6, 8827588, стр. 1474-1478. https://doi.org/10.1109/TPS.2019.2937605

APA

Shoshin, A., Burdakov, A., Ivantsivskiy, M., Polosatkin, S., Klimenko, M., Semenov, A., Taskaev, S., Kasatov, D., Shchudlo, I., Makarov, A., & Davydov, N. (2020). Qualification of Boron Carbide Ceramics for Use in ITER Ports. IEEE Transactions on Plasma Science, 48(6), 1474-1478. [8827588]. https://doi.org/10.1109/TPS.2019.2937605

Vancouver

Shoshin A, Burdakov A, Ivantsivskiy M, Polosatkin S, Klimenko M, Semenov A и др. Qualification of Boron Carbide Ceramics for Use in ITER Ports. IEEE Transactions on Plasma Science. 2020 июнь 1;48(6):1474-1478. 8827588. doi: 10.1109/TPS.2019.2937605

Author

Shoshin, Andrey ; Burdakov, Alexander ; Ivantsivskiy, Maxim и др. / Qualification of Boron Carbide Ceramics for Use in ITER Ports. в: IEEE Transactions on Plasma Science. 2020 ; Том 48, № 6. стр. 1474-1478.

BibTeX

@article{df774e47c9dd41cc956b2e538a98b9a1,
title = "Qualification of Boron Carbide Ceramics for Use in ITER Ports",
abstract = "Boron carbide has been proposed for the neutron protection of equipment in the ITER diagnostic ports and for reducing the dose to maintenance personnel. The chemical composition, vacuum, and thermal properties of ceramics of boron carbide were studied. It is demonstrated that the outgassing rate of ceramics meets the requirements of the ITER Vacuum Handbook. Calculation of the total gas emission from the ITER equatorial port #11 is carried out. The contact thermal conductivity at the boundary between ceramics and bronze is measured. Manganese content is determined by the method of activation analysis in ceramics. It is shown that sintered and hot-pressed boron carbide ceramics can be used in the ITER diagnostic ports.",
keywords = "Boron carbide ceramic material properties, ITER port mechanical engineering",
author = "Andrey Shoshin and Alexander Burdakov and Maxim Ivantsivskiy and Sergey Polosatkin and Maria Klimenko and Alexey Semenov and Sergey Taskaev and Dmitrii Kasatov and Ivan Shchudlo and Alexander Makarov and Nikolay Davydov",
year = "2020",
month = jun,
day = "1",
doi = "10.1109/TPS.2019.2937605",
language = "English",
volume = "48",
pages = "1474--1478",
journal = "IEEE Transactions on Plasma Science",
issn = "0093-3813",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "6",

}

RIS

TY - JOUR

T1 - Qualification of Boron Carbide Ceramics for Use in ITER Ports

AU - Shoshin, Andrey

AU - Burdakov, Alexander

AU - Ivantsivskiy, Maxim

AU - Polosatkin, Sergey

AU - Klimenko, Maria

AU - Semenov, Alexey

AU - Taskaev, Sergey

AU - Kasatov, Dmitrii

AU - Shchudlo, Ivan

AU - Makarov, Alexander

AU - Davydov, Nikolay

PY - 2020/6/1

Y1 - 2020/6/1

N2 - Boron carbide has been proposed for the neutron protection of equipment in the ITER diagnostic ports and for reducing the dose to maintenance personnel. The chemical composition, vacuum, and thermal properties of ceramics of boron carbide were studied. It is demonstrated that the outgassing rate of ceramics meets the requirements of the ITER Vacuum Handbook. Calculation of the total gas emission from the ITER equatorial port #11 is carried out. The contact thermal conductivity at the boundary between ceramics and bronze is measured. Manganese content is determined by the method of activation analysis in ceramics. It is shown that sintered and hot-pressed boron carbide ceramics can be used in the ITER diagnostic ports.

AB - Boron carbide has been proposed for the neutron protection of equipment in the ITER diagnostic ports and for reducing the dose to maintenance personnel. The chemical composition, vacuum, and thermal properties of ceramics of boron carbide were studied. It is demonstrated that the outgassing rate of ceramics meets the requirements of the ITER Vacuum Handbook. Calculation of the total gas emission from the ITER equatorial port #11 is carried out. The contact thermal conductivity at the boundary between ceramics and bronze is measured. Manganese content is determined by the method of activation analysis in ceramics. It is shown that sintered and hot-pressed boron carbide ceramics can be used in the ITER diagnostic ports.

KW - Boron carbide ceramic material properties

KW - ITER port mechanical engineering

UR - http://www.scopus.com/inward/record.url?scp=85087093585&partnerID=8YFLogxK

U2 - 10.1109/TPS.2019.2937605

DO - 10.1109/TPS.2019.2937605

M3 - Article

AN - SCOPUS:85087093585

VL - 48

SP - 1474

EP - 1478

JO - IEEE Transactions on Plasma Science

JF - IEEE Transactions on Plasma Science

SN - 0093-3813

IS - 6

M1 - 8827588

ER -

ID: 24722591