Standard

Prospects for using two-phase micro-size systems for high heat flux removal. / Kuznetsov, V. V.; Shamirzaev, A. S.; Mordovskoy, A. S.

в: Journal of Physics: Conference Series, Том 2057, № 1, 012058, 08.11.2021.

Результаты исследований: Научные публикации в периодических изданиях › статья по материалам конференции › Рецензирование

Harvard

Kuznetsov, VV, Shamirzaev, AS & Mordovskoy, AS 2021, 'Prospects for using two-phase micro-size systems for high heat flux removal', Journal of Physics: Conference Series, Том. 2057, № 1, 012058. https://doi.org/10.1088/1742-6596/2057/1/012058

APA

Kuznetsov, V. V., Shamirzaev, A. S., & Mordovskoy, A. S. (2021). Prospects for using two-phase micro-size systems for high heat flux removal. Journal of Physics: Conference Series, 2057(1), [012058]. https://doi.org/10.1088/1742-6596/2057/1/012058

Vancouver

Kuznetsov VV, Shamirzaev AS, Mordovskoy AS. Prospects for using two-phase micro-size systems for high heat flux removal. Journal of Physics: Conference Series. 2021 нояб. 8;2057(1):012058. doi: 10.1088/1742-6596/2057/1/012058

Author

Kuznetsov, V. V. ; Shamirzaev, A. S. ; Mordovskoy, A. S. / Prospects for using two-phase micro-size systems for high heat flux removal. в: Journal of Physics: Conference Series. 2021 ; Том 2057, № 1.

BibTeX

@article{5d2a3a50f7dd46d4b4ba4f25bb32599f,
title = "Prospects for using two-phase micro-size systems for high heat flux removal",
abstract = "Heat transfer in active systems for high heat removal based on the micro-channels and hybrid micro-channel/micro-jet is considered. The application of these systems allows significantly increasing the critical heat flux for a dense arrangement of the heat stressed equipment. The characteristics of heat transfer and critical heat flux during subcooled flow boiling of water in the micro-channel heat sink and during micro-jet impingement in narrow channel are obtained. The experiments are performed for the horizontal segmented microchannels with a cross section of 340×2000 μm2 made on the top of copper target and for impingement micro-jet cooling of the copper target in the gap of 1000 μm. It has been found that, compared with impingement micro-jet cooling in similar condition, the micro-channel cooling is more effective for high heat flux removal although it creates the considerably high wall temperature.",
author = "Kuznetsov, {V. V.} and Shamirzaev, {A. S.} and Mordovskoy, {A. S.}",
note = "Funding Information: The research was carried out at IT SB RAS with the support of the Russian Science Foundation grant (project No. 21-19-00626). Publisher Copyright: {\textcopyright} 2021 Institute of Physics Publishing. All rights reserved.; 6th All-Russian Conference on Thermophysics and Physical Hydrodynamics, TPH 2021 and the School for Young Scientists on Thermal Physics and Physical Hydrodynamics: Modern Challenges, TPHMC2021 ; Conference date: 22-08-2021 Through 29-08-2021",
year = "2021",
month = nov,
day = "8",
doi = "10.1088/1742-6596/2057/1/012058",
language = "English",
volume = "2057",
journal = "Journal of Physics: Conference Series",
issn = "1742-6588",
publisher = "IOP Publishing Ltd.",
number = "1",

}

RIS

TY - JOUR

T1 - Prospects for using two-phase micro-size systems for high heat flux removal

AU - Kuznetsov, V. V.

AU - Shamirzaev, A. S.

AU - Mordovskoy, A. S.

N1 - Funding Information: The research was carried out at IT SB RAS with the support of the Russian Science Foundation grant (project No. 21-19-00626). Publisher Copyright: © 2021 Institute of Physics Publishing. All rights reserved.

PY - 2021/11/8

Y1 - 2021/11/8

N2 - Heat transfer in active systems for high heat removal based on the micro-channels and hybrid micro-channel/micro-jet is considered. The application of these systems allows significantly increasing the critical heat flux for a dense arrangement of the heat stressed equipment. The characteristics of heat transfer and critical heat flux during subcooled flow boiling of water in the micro-channel heat sink and during micro-jet impingement in narrow channel are obtained. The experiments are performed for the horizontal segmented microchannels with a cross section of 340×2000 μm2 made on the top of copper target and for impingement micro-jet cooling of the copper target in the gap of 1000 μm. It has been found that, compared with impingement micro-jet cooling in similar condition, the micro-channel cooling is more effective for high heat flux removal although it creates the considerably high wall temperature.

AB - Heat transfer in active systems for high heat removal based on the micro-channels and hybrid micro-channel/micro-jet is considered. The application of these systems allows significantly increasing the critical heat flux for a dense arrangement of the heat stressed equipment. The characteristics of heat transfer and critical heat flux during subcooled flow boiling of water in the micro-channel heat sink and during micro-jet impingement in narrow channel are obtained. The experiments are performed for the horizontal segmented microchannels with a cross section of 340×2000 μm2 made on the top of copper target and for impingement micro-jet cooling of the copper target in the gap of 1000 μm. It has been found that, compared with impingement micro-jet cooling in similar condition, the micro-channel cooling is more effective for high heat flux removal although it creates the considerably high wall temperature.

UR - http://www.scopus.com/inward/record.url?scp=85119583563&partnerID=8YFLogxK

U2 - 10.1088/1742-6596/2057/1/012058

DO - 10.1088/1742-6596/2057/1/012058

M3 - Conference article

AN - SCOPUS:85119583563

VL - 2057

JO - Journal of Physics: Conference Series

JF - Journal of Physics: Conference Series

SN - 1742-6588

IS - 1

M1 - 012058

T2 - 6th All-Russian Conference on Thermophysics and Physical Hydrodynamics, TPH 2021 and the School for Young Scientists on Thermal Physics and Physical Hydrodynamics: Modern Challenges, TPHMC2021

Y2 - 22 August 2021 through 29 August 2021

ER -

ID: 34854856