Standard

Production of Pure Hydrogen from Diesel Fuel by Steam Pre-Reforming and Subsequent Conversion in a Membrane Reactor. / Kirillov, V. A.; Shigarov, A. B.; Amosov, Yu I. и др.

в: Petroleum Chemistry, Том 58, № 2, 01.02.2018, стр. 103-113.

Результаты исследований: Научные публикации в периодических изданияхстатьяРецензирование

Harvard

Kirillov, VA, Shigarov, AB, Amosov, YI, Belyaev, VD & Gerasimov, EY 2018, 'Production of Pure Hydrogen from Diesel Fuel by Steam Pre-Reforming and Subsequent Conversion in a Membrane Reactor', Petroleum Chemistry, Том. 58, № 2, стр. 103-113. https://doi.org/10.1134/S0965544118020020

APA

Vancouver

Kirillov VA, Shigarov AB, Amosov YI, Belyaev VD, Gerasimov EY. Production of Pure Hydrogen from Diesel Fuel by Steam Pre-Reforming and Subsequent Conversion in a Membrane Reactor. Petroleum Chemistry. 2018 февр. 1;58(2):103-113. doi: 10.1134/S0965544118020020

Author

Kirillov, V. A. ; Shigarov, A. B. ; Amosov, Yu I. и др. / Production of Pure Hydrogen from Diesel Fuel by Steam Pre-Reforming and Subsequent Conversion in a Membrane Reactor. в: Petroleum Chemistry. 2018 ; Том 58, № 2. стр. 103-113.

BibTeX

@article{56a7c10b5da24259aefbc74b7ef7d3b7,
title = "Production of Pure Hydrogen from Diesel Fuel by Steam Pre-Reforming and Subsequent Conversion in a Membrane Reactor",
abstract = "The results of experimental study and mathematical modeling of a fuel processor for the production of pure hydrogen from diesel fuel with a productivity of 600–700 g (H2)/h, consisting of an adiabatic reactor for diesel fuel pre-reforming followed by steam conversion of pre-reforming products in a catalytic Pd–Ag membrane reactor for hydrogen extraction are presented. The membrane reactor consists of 32 membrane modules arranged in 8 sections of 4 modules each. A mathematical model has been developed and two schemes of layout of the modules in the membrane reactor have been simulated. One scheme involves the cross-flow distribution of flue gas and fuel gas reformate to individual modules and leads to overheating of the input modules and cooling of the output modules. The other scheme with the cocurrent distribution of streams, along both the reactant path and the flue gas path, is preferable from the viewpoint of the temperature uniformity of different modules within a section. On the basis of the data obtained, an estimated calculation of the parameters of a power generation unit with a battery of low-temperature fuel cells has been made. For the example considered, the thermal efficiency of the fuel processor is 87%. With an efficiency of the fuel cell battery of 42%, the electrical efficiency of the fuel cell power unit will be 36%.",
keywords = "catalyst, foamed material, fuel cell, hydrogen, membrane reactor, natural gas, palladium membrane, pre-reforming, steam conversion",
author = "Kirillov, {V. A.} and Shigarov, {A. B.} and Amosov, {Yu I.} and Belyaev, {V. D.} and Gerasimov, {E. Yu}",
note = "Publisher Copyright: {\textcopyright} 2018, Pleiades Publishing, Ltd.",
year = "2018",
month = feb,
day = "1",
doi = "10.1134/S0965544118020020",
language = "English",
volume = "58",
pages = "103--113",
journal = "Petroleum Chemistry",
issn = "0965-5441",
publisher = "Maik Nauka-Interperiodica Publishing",
number = "2",

}

RIS

TY - JOUR

T1 - Production of Pure Hydrogen from Diesel Fuel by Steam Pre-Reforming and Subsequent Conversion in a Membrane Reactor

AU - Kirillov, V. A.

AU - Shigarov, A. B.

AU - Amosov, Yu I.

AU - Belyaev, V. D.

AU - Gerasimov, E. Yu

N1 - Publisher Copyright: © 2018, Pleiades Publishing, Ltd.

PY - 2018/2/1

Y1 - 2018/2/1

N2 - The results of experimental study and mathematical modeling of a fuel processor for the production of pure hydrogen from diesel fuel with a productivity of 600–700 g (H2)/h, consisting of an adiabatic reactor for diesel fuel pre-reforming followed by steam conversion of pre-reforming products in a catalytic Pd–Ag membrane reactor for hydrogen extraction are presented. The membrane reactor consists of 32 membrane modules arranged in 8 sections of 4 modules each. A mathematical model has been developed and two schemes of layout of the modules in the membrane reactor have been simulated. One scheme involves the cross-flow distribution of flue gas and fuel gas reformate to individual modules and leads to overheating of the input modules and cooling of the output modules. The other scheme with the cocurrent distribution of streams, along both the reactant path and the flue gas path, is preferable from the viewpoint of the temperature uniformity of different modules within a section. On the basis of the data obtained, an estimated calculation of the parameters of a power generation unit with a battery of low-temperature fuel cells has been made. For the example considered, the thermal efficiency of the fuel processor is 87%. With an efficiency of the fuel cell battery of 42%, the electrical efficiency of the fuel cell power unit will be 36%.

AB - The results of experimental study and mathematical modeling of a fuel processor for the production of pure hydrogen from diesel fuel with a productivity of 600–700 g (H2)/h, consisting of an adiabatic reactor for diesel fuel pre-reforming followed by steam conversion of pre-reforming products in a catalytic Pd–Ag membrane reactor for hydrogen extraction are presented. The membrane reactor consists of 32 membrane modules arranged in 8 sections of 4 modules each. A mathematical model has been developed and two schemes of layout of the modules in the membrane reactor have been simulated. One scheme involves the cross-flow distribution of flue gas and fuel gas reformate to individual modules and leads to overheating of the input modules and cooling of the output modules. The other scheme with the cocurrent distribution of streams, along both the reactant path and the flue gas path, is preferable from the viewpoint of the temperature uniformity of different modules within a section. On the basis of the data obtained, an estimated calculation of the parameters of a power generation unit with a battery of low-temperature fuel cells has been made. For the example considered, the thermal efficiency of the fuel processor is 87%. With an efficiency of the fuel cell battery of 42%, the electrical efficiency of the fuel cell power unit will be 36%.

KW - catalyst

KW - foamed material

KW - fuel cell

KW - hydrogen

KW - membrane reactor

KW - natural gas

KW - palladium membrane

KW - pre-reforming

KW - steam conversion

UR - http://www.scopus.com/inward/record.url?scp=85042903665&partnerID=8YFLogxK

U2 - 10.1134/S0965544118020020

DO - 10.1134/S0965544118020020

M3 - Article

AN - SCOPUS:85042903665

VL - 58

SP - 103

EP - 113

JO - Petroleum Chemistry

JF - Petroleum Chemistry

SN - 0965-5441

IS - 2

ER -

ID: 10352496