Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование
Processing of the signals from the Liquid Xenon Calorimeter for timing measurements. / Epshteyn, L. B.; Grebenuyk, A. A.; Kozyrev, A. N. и др.
в: Journal of Instrumentation, Том 12, № 2, 02035, 10.02.2017.Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование
}
TY - JOUR
T1 - Processing of the signals from the Liquid Xenon Calorimeter for timing measurements
AU - Epshteyn, L. B.
AU - Grebenuyk, A. A.
AU - Kozyrev, A. N.
AU - Logashenko, I. B.
AU - Mikhaylov, K. Yu
AU - Ruban, A. A.
AU - Yudin, Yu V.
N1 - Publisher Copyright: © 2017 IOP Publishing Ltd and Sissa Medialab srl.
PY - 2017/2/10
Y1 - 2017/2/10
N2 - One of the goals of the Cryogenic Magnetic Detector at Budker Institute of Nuclear Physics SB RAS (Novosibirsk, Russia) is a study of hadron production in electron-positron collisions near threshold. The neutron-antineutron pair production events can be detected only by the calorimeters. In the barrel calorimeter the antineutron annihilation typically occurs about 5 ns or later after the beams crossing. For identification of such events it is necessary to measure the time of flight of particles to the LXe-calorimeter with an accuracy of about a few nanoseconds. The LXe-calorimeter consists of 14 layers of ionization chambers with two readout: anode and cathode. The duration of charge collection to the anodes is about 4.5 μs, while the required accuracy of measuring of the signal arrival time is less than 1/1000 of that (i.e. 4.5 ns). Besides, the signals' shapes differ substantially from event to event, so the signal arrival time is measured in two stages. In the paper we describ the development of the special electronics which performs waveform digitization and the on-line measurement of signals' arrival times and amplitudes.
AB - One of the goals of the Cryogenic Magnetic Detector at Budker Institute of Nuclear Physics SB RAS (Novosibirsk, Russia) is a study of hadron production in electron-positron collisions near threshold. The neutron-antineutron pair production events can be detected only by the calorimeters. In the barrel calorimeter the antineutron annihilation typically occurs about 5 ns or later after the beams crossing. For identification of such events it is necessary to measure the time of flight of particles to the LXe-calorimeter with an accuracy of about a few nanoseconds. The LXe-calorimeter consists of 14 layers of ionization chambers with two readout: anode and cathode. The duration of charge collection to the anodes is about 4.5 μs, while the required accuracy of measuring of the signal arrival time is less than 1/1000 of that (i.e. 4.5 ns). Besides, the signals' shapes differ substantially from event to event, so the signal arrival time is measured in two stages. In the paper we describ the development of the special electronics which performs waveform digitization and the on-line measurement of signals' arrival times and amplitudes.
KW - Digital signal processing (DSP)
KW - Front-end electronics for detector readout
KW - Trigger algorithms
KW - CMD-3 DETECTOR
UR - http://www.scopus.com/inward/record.url?scp=85014798881&partnerID=8YFLogxK
U2 - 10.1088/1748-0221/12/02/C02035
DO - 10.1088/1748-0221/12/02/C02035
M3 - Article
AN - SCOPUS:85014798881
VL - 12
JO - Journal of Instrumentation
JF - Journal of Instrumentation
SN - 1748-0221
IS - 2
M1 - 02035
ER -
ID: 8835970