Standard

Polymer particle growth and morphology evolution during dispersion polymerization through optical microscopy. / Sankova, N.; Vyvdenko, D.; Luzina, E. и др.

в: Colloid and Polymer Science, Том 300, № 6, 06.2022, стр. 625-640.

Результаты исследований: Научные публикации в периодических изданияхстатьяРецензирование

Harvard

APA

Vancouver

Sankova N, Vyvdenko D, Luzina E, Shestakova D, Babina K, Malakhova Y и др. Polymer particle growth and morphology evolution during dispersion polymerization through optical microscopy. Colloid and Polymer Science. 2022 июнь;300(6):625-640. doi: 10.1007/s00396-022-04972-4

Author

Sankova, N. ; Vyvdenko, D. ; Luzina, E. и др. / Polymer particle growth and morphology evolution during dispersion polymerization through optical microscopy. в: Colloid and Polymer Science. 2022 ; Том 300, № 6. стр. 625-640.

BibTeX

@article{b6b75d7ca5054027b9d288422b472f6d,
title = "Polymer particle growth and morphology evolution during dispersion polymerization through optical microscopy",
abstract = "The paper is focused on the growth of polystyrene particles followed by optical microscopy during dispersion polymerization (DP) in the absence of crosslinking agents. In particular, we compared the growth kinetics of the particles and their tendency to coagulation in alcoholic media in the presence of a steric stabilizer, chosen from one of the following: polyvinylpyrrolidone (PVP-40, PVP-10, PVP-360), hydroxypropyl cellulose (HPC), poly(acrylic acid) (PAA), and polyvinyl alcohol (PVA). The particle size distributions from the optical microscopy images were obtained using trained neural network. To predict the particles{\textquoteright} growth at the first few hours after microphase separation, we suggest to adopt a simple model describing the coalescence of liquid drops in immiscible fluids. Based on this model, we discuss the possible approaches for the preparation routes of the particles with non-spherical morphology.",
keywords = "Coagulation, Dispersion polymerization, Growth mechanism, Morphology evolution, Number-based particle size distribution, Polymer particles, Precipitation polymerization",
author = "N. Sankova and D. Vyvdenko and E. Luzina and D. Shestakova and K. Babina and Y. Malakhova and E. Yakush and E. Parkhomchuk",
note = "Funding Information: Our work was supported by the Ministry of Science and Higher Education of the Russian Federation within the governmental order for Boreskov Institute of Catalysis (project AAAA-A21-121011490008–3). Publisher Copyright: {\textcopyright} 2022, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.",
year = "2022",
month = jun,
doi = "10.1007/s00396-022-04972-4",
language = "English",
volume = "300",
pages = "625--640",
journal = "Colloid and Polymer Science",
issn = "0303-402X",
publisher = "Springer-VDI Verlag GmbH und Co. KG",
number = "6",

}

RIS

TY - JOUR

T1 - Polymer particle growth and morphology evolution during dispersion polymerization through optical microscopy

AU - Sankova, N.

AU - Vyvdenko, D.

AU - Luzina, E.

AU - Shestakova, D.

AU - Babina, K.

AU - Malakhova, Y.

AU - Yakush, E.

AU - Parkhomchuk, E.

N1 - Funding Information: Our work was supported by the Ministry of Science and Higher Education of the Russian Federation within the governmental order for Boreskov Institute of Catalysis (project AAAA-A21-121011490008–3). Publisher Copyright: © 2022, The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.

PY - 2022/6

Y1 - 2022/6

N2 - The paper is focused on the growth of polystyrene particles followed by optical microscopy during dispersion polymerization (DP) in the absence of crosslinking agents. In particular, we compared the growth kinetics of the particles and their tendency to coagulation in alcoholic media in the presence of a steric stabilizer, chosen from one of the following: polyvinylpyrrolidone (PVP-40, PVP-10, PVP-360), hydroxypropyl cellulose (HPC), poly(acrylic acid) (PAA), and polyvinyl alcohol (PVA). The particle size distributions from the optical microscopy images were obtained using trained neural network. To predict the particles’ growth at the first few hours after microphase separation, we suggest to adopt a simple model describing the coalescence of liquid drops in immiscible fluids. Based on this model, we discuss the possible approaches for the preparation routes of the particles with non-spherical morphology.

AB - The paper is focused on the growth of polystyrene particles followed by optical microscopy during dispersion polymerization (DP) in the absence of crosslinking agents. In particular, we compared the growth kinetics of the particles and their tendency to coagulation in alcoholic media in the presence of a steric stabilizer, chosen from one of the following: polyvinylpyrrolidone (PVP-40, PVP-10, PVP-360), hydroxypropyl cellulose (HPC), poly(acrylic acid) (PAA), and polyvinyl alcohol (PVA). The particle size distributions from the optical microscopy images were obtained using trained neural network. To predict the particles’ growth at the first few hours after microphase separation, we suggest to adopt a simple model describing the coalescence of liquid drops in immiscible fluids. Based on this model, we discuss the possible approaches for the preparation routes of the particles with non-spherical morphology.

KW - Coagulation

KW - Dispersion polymerization

KW - Growth mechanism

KW - Morphology evolution

KW - Number-based particle size distribution

KW - Polymer particles

KW - Precipitation polymerization

UR - http://www.scopus.com/inward/record.url?scp=85128743146&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/6e0968a1-6bd1-3cc2-bea0-ef31dcbfbbd4/

U2 - 10.1007/s00396-022-04972-4

DO - 10.1007/s00396-022-04972-4

M3 - Article

AN - SCOPUS:85128743146

VL - 300

SP - 625

EP - 640

JO - Colloid and Polymer Science

JF - Colloid and Polymer Science

SN - 0303-402X

IS - 6

ER -

ID: 36029864