Standard

Photoluminescence associated with {113} defects in oxygen-implanted silicon. / Sobolev, N. A.; Kalyadin, A. E.; Shek, E. I. и др.

в: Physica Status Solidi (A) Applications and Materials Science, Том 214, № 7, 1700317, 01.07.2017.

Результаты исследований: Научные публикации в периодических изданияхстатьяРецензирование

Harvard

Sobolev, NA, Kalyadin, AE, Shek, EI, Shtel‘makh, KF, Vdovin, VI, Gutakovskii, AK & Fedina, LI 2017, 'Photoluminescence associated with {113} defects in oxygen-implanted silicon', Physica Status Solidi (A) Applications and Materials Science, Том. 214, № 7, 1700317. https://doi.org/10.1002/pssa.201700317

APA

Sobolev, N. A., Kalyadin, A. E., Shek, E. I., Shtel‘makh, K. F., Vdovin, V. I., Gutakovskii, A. K., & Fedina, L. I. (2017). Photoluminescence associated with {113} defects in oxygen-implanted silicon. Physica Status Solidi (A) Applications and Materials Science, 214(7), [1700317]. https://doi.org/10.1002/pssa.201700317

Vancouver

Sobolev NA, Kalyadin AE, Shek EI, Shtel‘makh KF, Vdovin VI, Gutakovskii AK и др. Photoluminescence associated with {113} defects in oxygen-implanted silicon. Physica Status Solidi (A) Applications and Materials Science. 2017 июль 1;214(7):1700317. doi: 10.1002/pssa.201700317

Author

Sobolev, N. A. ; Kalyadin, A. E. ; Shek, E. I. и др. / Photoluminescence associated with {113} defects in oxygen-implanted silicon. в: Physica Status Solidi (A) Applications and Materials Science. 2017 ; Том 214, № 7.

BibTeX

@article{7fc60a68cb7b4e62abadae6074fea191,
title = "Photoluminescence associated with {113} defects in oxygen-implanted silicon",
abstract = "The dependences of photoluminescence (PL) and the structure of {113} defects induced in n-Cz-Si (100) wafers by implantation of 350 keV O+ ions at a dose of 3.7 × 1014 cm−2 on the annealing time at 700 °C for 0.5–2.0 h in a chlorine-containing atmosphere have been studied in detail. Extended defects were examined by high-resolution transmission electron microscopy (HRTEM) on cross-sectional samples. HRTEM evidences that {113} defects dominate in all the samples under study. A shift of the PL band from 920 to 903 meV (“903” line, R-line, or 1370 nm line) was observed with increasing annealing time, which suggests a strong change of the {113} defect structure. According to the Geometrical Phase Method used for the measurements of lattice deformations around the {113} defects observed by HRTEM, this change is related to a transformation of a vacancy-type {113} defect to an interstitial one. The effect of the measurement temperature on the main parameters of R-line has been studied, too. A sample annealed for 1 h has some characteristic features of the temperature dependence of the PL intensity: it increases with activation energy of 19.1 meV at low temperatures and decreases with deactivation energies of 32.2 and 175.5 meV at higher temperatures. With the increasing temperature, the luminescence peak shifts by the same energy as the forbidden gap width, while the FWHM of the line grows linearly.",
keywords = "defects, ion implantation, oxygen, photoluminescence, silicon, ROOM-TEMPERATURE, OPTICAL-PROPERTIES, EXTENDED DEFECTS, ELECTRON-IRRADIATION, ROD-LIKE DEFECTS, DEPENDENCE, EVOLUTION, LUMINESCENCE, SI, DIFFUSION",
author = "Sobolev, {N. A.} and Kalyadin, {A. E.} and Shek, {E. I.} and Shtel{\textquoteleft}makh, {K. F.} and Vdovin, {V. I.} and Gutakovskii, {A. K.} and Fedina, {L. I.}",
year = "2017",
month = jul,
day = "1",
doi = "10.1002/pssa.201700317",
language = "English",
volume = "214",
journal = "Physica Status Solidi (A) Applications and Materials Science",
issn = "1862-6300",
publisher = "Wiley-VCH Verlag",
number = "7",

}

RIS

TY - JOUR

T1 - Photoluminescence associated with {113} defects in oxygen-implanted silicon

AU - Sobolev, N. A.

AU - Kalyadin, A. E.

AU - Shek, E. I.

AU - Shtel‘makh, K. F.

AU - Vdovin, V. I.

AU - Gutakovskii, A. K.

AU - Fedina, L. I.

PY - 2017/7/1

Y1 - 2017/7/1

N2 - The dependences of photoluminescence (PL) and the structure of {113} defects induced in n-Cz-Si (100) wafers by implantation of 350 keV O+ ions at a dose of 3.7 × 1014 cm−2 on the annealing time at 700 °C for 0.5–2.0 h in a chlorine-containing atmosphere have been studied in detail. Extended defects were examined by high-resolution transmission electron microscopy (HRTEM) on cross-sectional samples. HRTEM evidences that {113} defects dominate in all the samples under study. A shift of the PL band from 920 to 903 meV (“903” line, R-line, or 1370 nm line) was observed with increasing annealing time, which suggests a strong change of the {113} defect structure. According to the Geometrical Phase Method used for the measurements of lattice deformations around the {113} defects observed by HRTEM, this change is related to a transformation of a vacancy-type {113} defect to an interstitial one. The effect of the measurement temperature on the main parameters of R-line has been studied, too. A sample annealed for 1 h has some characteristic features of the temperature dependence of the PL intensity: it increases with activation energy of 19.1 meV at low temperatures and decreases with deactivation energies of 32.2 and 175.5 meV at higher temperatures. With the increasing temperature, the luminescence peak shifts by the same energy as the forbidden gap width, while the FWHM of the line grows linearly.

AB - The dependences of photoluminescence (PL) and the structure of {113} defects induced in n-Cz-Si (100) wafers by implantation of 350 keV O+ ions at a dose of 3.7 × 1014 cm−2 on the annealing time at 700 °C for 0.5–2.0 h in a chlorine-containing atmosphere have been studied in detail. Extended defects were examined by high-resolution transmission electron microscopy (HRTEM) on cross-sectional samples. HRTEM evidences that {113} defects dominate in all the samples under study. A shift of the PL band from 920 to 903 meV (“903” line, R-line, or 1370 nm line) was observed with increasing annealing time, which suggests a strong change of the {113} defect structure. According to the Geometrical Phase Method used for the measurements of lattice deformations around the {113} defects observed by HRTEM, this change is related to a transformation of a vacancy-type {113} defect to an interstitial one. The effect of the measurement temperature on the main parameters of R-line has been studied, too. A sample annealed for 1 h has some characteristic features of the temperature dependence of the PL intensity: it increases with activation energy of 19.1 meV at low temperatures and decreases with deactivation energies of 32.2 and 175.5 meV at higher temperatures. With the increasing temperature, the luminescence peak shifts by the same energy as the forbidden gap width, while the FWHM of the line grows linearly.

KW - defects

KW - ion implantation

KW - oxygen

KW - photoluminescence

KW - silicon

KW - ROOM-TEMPERATURE

KW - OPTICAL-PROPERTIES

KW - EXTENDED DEFECTS

KW - ELECTRON-IRRADIATION

KW - ROD-LIKE DEFECTS

KW - DEPENDENCE

KW - EVOLUTION

KW - LUMINESCENCE

KW - SI

KW - DIFFUSION

UR - http://www.scopus.com/inward/record.url?scp=85021755100&partnerID=8YFLogxK

U2 - 10.1002/pssa.201700317

DO - 10.1002/pssa.201700317

M3 - Article

AN - SCOPUS:85021755100

VL - 214

JO - Physica Status Solidi (A) Applications and Materials Science

JF - Physica Status Solidi (A) Applications and Materials Science

SN - 1862-6300

IS - 7

M1 - 1700317

ER -

ID: 10094215