Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование
Methane Hydrate Formation in Halloysite Clay Nanotubes. / Em, Yuri; Stoporev, Andrey; Semenov, Anton и др.
в: ACS Sustainable Chemistry and Engineering, Том 8, № 21, 01.06.2020, стр. 7860-7868.Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование
}
TY - JOUR
T1 - Methane Hydrate Formation in Halloysite Clay Nanotubes
AU - Em, Yuri
AU - Stoporev, Andrey
AU - Semenov, Anton
AU - Glotov, Aleksandr
AU - Smirnova, Ekaterina
AU - Villevald, Galina
AU - Vinokurov, Vladimir
AU - Manakov, Andrey
AU - Lvov, Yuri
PY - 2020/6/1
Y1 - 2020/6/1
N2 - Equilibrium conditions of methane hydrate formation in the lumens of natural clay nanotubes were analyzed. The water adsorbed by the pristine nanotubes is capable to form methane hydrate in the confined hydrophilic inner pores of 10-100 nm (surface chemistry of the inner lumens is Al2O3, and external tube's surface is SiO2). From 17.5 wt % of water adsorbed by the clay, 12 wt % was involved in methane hydrate formation (conversion ≈ 70%). The crystal structure of the hydrate inside the nanoconfined spaces of halloysite did not change as compared with bulk systems. The formation of methane hydrate occurs during cooling at 0-6 °C simultaneously over the whole clay sample, indicating the catalytic activity of halloysite surface. This formulation slows down decomposition of the hydrate confined in the pores at atmospheric pressure at temperatures below 0 °C. The water is retained in the inner clay pores over the formation and decomposition of methane hydrate. We also modified halloysite nanotubes with mesoporous silica MCM-41 (similar silica gel and sand are routinely used for gas hydrate formation) increasing the ratio of SiO2 to Al2O3 to compare methane hydrate formation in these chemically different pores. This allowed us to decrease substantially pore dimensions in the hybrid system (to 2-3 nm). The fraction of methane hydrate stable within the temperature range from -18 to 10 °C in this smaller pore hybrid system was 8 times less as compared to unmodified halloysite. The very small pores of the halloysite/MCM-41 system allowed formation of hydrate only at a temperatures significantly less than -18 °C. Natural halloysite clay nanotubes were suggested as efficient solid containers for methane hydrates encasing. Halloysite is cheap and scalable up to thousands of tons; it is a mesomaterial capable of methane storage in clathrate hydrates with water-based green chemistry processing. Suggested nanoclay-based hydrate technology is also prospective for gas separation.
AB - Equilibrium conditions of methane hydrate formation in the lumens of natural clay nanotubes were analyzed. The water adsorbed by the pristine nanotubes is capable to form methane hydrate in the confined hydrophilic inner pores of 10-100 nm (surface chemistry of the inner lumens is Al2O3, and external tube's surface is SiO2). From 17.5 wt % of water adsorbed by the clay, 12 wt % was involved in methane hydrate formation (conversion ≈ 70%). The crystal structure of the hydrate inside the nanoconfined spaces of halloysite did not change as compared with bulk systems. The formation of methane hydrate occurs during cooling at 0-6 °C simultaneously over the whole clay sample, indicating the catalytic activity of halloysite surface. This formulation slows down decomposition of the hydrate confined in the pores at atmospheric pressure at temperatures below 0 °C. The water is retained in the inner clay pores over the formation and decomposition of methane hydrate. We also modified halloysite nanotubes with mesoporous silica MCM-41 (similar silica gel and sand are routinely used for gas hydrate formation) increasing the ratio of SiO2 to Al2O3 to compare methane hydrate formation in these chemically different pores. This allowed us to decrease substantially pore dimensions in the hybrid system (to 2-3 nm). The fraction of methane hydrate stable within the temperature range from -18 to 10 °C in this smaller pore hybrid system was 8 times less as compared to unmodified halloysite. The very small pores of the halloysite/MCM-41 system allowed formation of hydrate only at a temperatures significantly less than -18 °C. Natural halloysite clay nanotubes were suggested as efficient solid containers for methane hydrates encasing. Halloysite is cheap and scalable up to thousands of tons; it is a mesomaterial capable of methane storage in clathrate hydrates with water-based green chemistry processing. Suggested nanoclay-based hydrate technology is also prospective for gas separation.
KW - Clay-mesosilica MCM-41 hybrid
KW - Halloysite nanotubes
KW - Methane hydrate
KW - Nanoconfined reaction
KW - THERMAL-EXPANSION
KW - DECOMPOSITION
KW - MESOPORES
KW - PORES
KW - BEADS
KW - PHASE
KW - DISSOCIATION
KW - EQUILIBRIA
KW - GAS
KW - MEDIA
UR - http://www.scopus.com/inward/record.url?scp=85087544989&partnerID=8YFLogxK
U2 - 10.1021/acssuschemeng.0c00758
DO - 10.1021/acssuschemeng.0c00758
M3 - Article
AN - SCOPUS:85087544989
VL - 8
SP - 7860
EP - 7868
JO - ACS Sustainable Chemistry and Engineering
JF - ACS Sustainable Chemistry and Engineering
SN - 2168-0485
IS - 21
ER -
ID: 24721810