Standard

Measurement of the Thermal Conductivity and Heat Transfer Coefficient of Nanofluids with Single-Walled Nanotubes. / Rudyak, V. Ya; Minakov, A. V.; Pryazhnikov, M. I. и др.

в: High Temperature, Том 60, № 5, 2022, стр. 631-638.

Результаты исследований: Научные публикации в периодических изданияхстатьяРецензирование

Harvard

APA

Vancouver

Rudyak VY, Minakov AV, Pryazhnikov MI, Guzey DV. Measurement of the Thermal Conductivity and Heat Transfer Coefficient of Nanofluids with Single-Walled Nanotubes. High Temperature. 2022;60(5):631-638. doi: 10.1134/S0018151X22030026

Author

Rudyak, V. Ya ; Minakov, A. V. ; Pryazhnikov, M. I. и др. / Measurement of the Thermal Conductivity and Heat Transfer Coefficient of Nanofluids with Single-Walled Nanotubes. в: High Temperature. 2022 ; Том 60, № 5. стр. 631-638.

BibTeX

@article{d93a8e70061448328b9faa1269b10228,
title = "Measurement of the Thermal Conductivity and Heat Transfer Coefficient of Nanofluids with Single-Walled Nanotubes",
abstract = "This article is devoted to the experimental study of thermal conductivity and heat transfer of nanofluids with single-walled nanotubes. The thermal conductivity of nanofluids based on ethylene glycol, water, and isopropyl alcohol has been measured. The weight concentration of carbon tubes varied from 0.05 to 0.5%. It is shown that in all cases the thermal conductivity of nanofluids increases significantly. For example, for a nanofluid based on isopropyl alcohol at a weight concentration of 0.05%, the excess of the thermal conductivity compared to the base liquid was 10.5% and at a concentration of 0.25 it was 51%. The results of measuring the heat transfer coefficient of a nanofluid based on isopropyl alcohol in a cylindrical channel are presented. The heat transfer coefficient of the nanofluid also has high values: at a tubes concentration of 0.25%, the heat transfer coefficient is 1.5 times higher than that of the base liquid. Along with the heat transfer coefficient, the pressure drop in the channel has been systematically studied, for which the viscosity of the nanofluids used has been previously studied.",
author = "Rudyak, {V. Ya} and Minakov, {A. V.} and Pryazhnikov, {M. I.} and Guzey, {D. V.}",
note = "Публикация для корректировки.",
year = "2022",
doi = "10.1134/S0018151X22030026",
language = "English",
volume = "60",
pages = "631--638",
journal = "High Temperature",
issn = "0018-151X",
publisher = "Maik Nauka-Interperiodica Publishing",
number = "5",

}

RIS

TY - JOUR

T1 - Measurement of the Thermal Conductivity and Heat Transfer Coefficient of Nanofluids with Single-Walled Nanotubes

AU - Rudyak, V. Ya

AU - Minakov, A. V.

AU - Pryazhnikov, M. I.

AU - Guzey, D. V.

N1 - Публикация для корректировки.

PY - 2022

Y1 - 2022

N2 - This article is devoted to the experimental study of thermal conductivity and heat transfer of nanofluids with single-walled nanotubes. The thermal conductivity of nanofluids based on ethylene glycol, water, and isopropyl alcohol has been measured. The weight concentration of carbon tubes varied from 0.05 to 0.5%. It is shown that in all cases the thermal conductivity of nanofluids increases significantly. For example, for a nanofluid based on isopropyl alcohol at a weight concentration of 0.05%, the excess of the thermal conductivity compared to the base liquid was 10.5% and at a concentration of 0.25 it was 51%. The results of measuring the heat transfer coefficient of a nanofluid based on isopropyl alcohol in a cylindrical channel are presented. The heat transfer coefficient of the nanofluid also has high values: at a tubes concentration of 0.25%, the heat transfer coefficient is 1.5 times higher than that of the base liquid. Along with the heat transfer coefficient, the pressure drop in the channel has been systematically studied, for which the viscosity of the nanofluids used has been previously studied.

AB - This article is devoted to the experimental study of thermal conductivity and heat transfer of nanofluids with single-walled nanotubes. The thermal conductivity of nanofluids based on ethylene glycol, water, and isopropyl alcohol has been measured. The weight concentration of carbon tubes varied from 0.05 to 0.5%. It is shown that in all cases the thermal conductivity of nanofluids increases significantly. For example, for a nanofluid based on isopropyl alcohol at a weight concentration of 0.05%, the excess of the thermal conductivity compared to the base liquid was 10.5% and at a concentration of 0.25 it was 51%. The results of measuring the heat transfer coefficient of a nanofluid based on isopropyl alcohol in a cylindrical channel are presented. The heat transfer coefficient of the nanofluid also has high values: at a tubes concentration of 0.25%, the heat transfer coefficient is 1.5 times higher than that of the base liquid. Along with the heat transfer coefficient, the pressure drop in the channel has been systematically studied, for which the viscosity of the nanofluids used has been previously studied.

UR - https://www.mendeley.com/catalogue/543c0035-3217-3a90-b5af-4bca2a739dc8/

U2 - 10.1134/S0018151X22030026

DO - 10.1134/S0018151X22030026

M3 - Article

VL - 60

SP - 631

EP - 638

JO - High Temperature

JF - High Temperature

SN - 0018-151X

IS - 5

ER -

ID: 55698051