Standard

Layer-by-Layer Formation of the NiO/CGO Composite Anode for SOFC by 3D Inkjet Printing Combined with Laser Treatment. / Bagishev, A. S.; Mal’bakhova, I. M.; Vorob’ev, A. M. и др.

в: Russian Journal of Electrochemistry, Том 58, № 7, 07.2022, стр. 600-605.

Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование

Harvard

Bagishev, AS, Mal’bakhova, IM, Vorob’ev, AM, Borisenko, TA, Asmed’yanova, AD, Titkov, AI & Nemudryi, AP 2022, 'Layer-by-Layer Formation of the NiO/CGO Composite Anode for SOFC by 3D Inkjet Printing Combined with Laser Treatment', Russian Journal of Electrochemistry, Том. 58, № 7, стр. 600-605. https://doi.org/10.1134/S1023193522070047

APA

Bagishev, A. S., Mal’bakhova, I. M., Vorob’ev, A. M., Borisenko, T. A., Asmed’yanova, A. D., Titkov, A. I., & Nemudryi, A. P. (2022). Layer-by-Layer Formation of the NiO/CGO Composite Anode for SOFC by 3D Inkjet Printing Combined with Laser Treatment. Russian Journal of Electrochemistry, 58(7), 600-605. https://doi.org/10.1134/S1023193522070047

Vancouver

Bagishev AS, Mal’bakhova IM, Vorob’ev AM, Borisenko TA, Asmed’yanova AD, Titkov AI и др. Layer-by-Layer Formation of the NiO/CGO Composite Anode for SOFC by 3D Inkjet Printing Combined with Laser Treatment. Russian Journal of Electrochemistry. 2022 июль;58(7):600-605. doi: 10.1134/S1023193522070047

Author

Bagishev, A. S. ; Mal’bakhova, I. M. ; Vorob’ev, A. M. и др. / Layer-by-Layer Formation of the NiO/CGO Composite Anode for SOFC by 3D Inkjet Printing Combined with Laser Treatment. в: Russian Journal of Electrochemistry. 2022 ; Том 58, № 7. стр. 600-605.

BibTeX

@article{602681c249ff46739054060ef152115e,
title = "Layer-by-Layer Formation of the NiO/CGO Composite Anode for SOFC by 3D Inkjet Printing Combined with Laser Treatment",
abstract = "A composition of the paste used in printing SOFC anodes is developed on the basis of nanosized nickel oxide and gadolinia-stabilized ceria with the aim of 3D inkjet printing followed by laser and thermal sintering. The parameters of the anode paste such as the size distribution of particles and the viscosity are determined. A SOFC anode sample is printed by means of a laboratory 3D printer equipped with a metering system for inkjet printing and also by a module for laser treatment. Experiments are carried out on printing three-dimensional test objects with the use of the developed ceramic paste. These samples are studied by a complex of physicochemical methods for determination of morphological and structural characteristics.",
keywords = "3D printing, additive manufacturing technologies, fuel cells, hydrogen",
author = "Bagishev, {A. S.} and Mal{\textquoteright}bakhova, {I. M.} and Vorob{\textquoteright}ev, {A. M.} and Borisenko, {T. A.} and Asmed{\textquoteright}yanova, {A. D.} and Titkov, {A. I.} and Nemudryi, {A. P.}",
note = "Funding Information: This study was supported by the Russian Scientific Foundation (grant no 21-79-30051). Publisher Copyright: {\textcopyright} 2022, Pleiades Publishing, Ltd.",
year = "2022",
month = jul,
doi = "10.1134/S1023193522070047",
language = "English",
volume = "58",
pages = "600--605",
journal = "Russian Journal of Electrochemistry",
issn = "1023-1935",
publisher = "Maik Nauka-Interperiodica Publishing",
number = "7",

}

RIS

TY - JOUR

T1 - Layer-by-Layer Formation of the NiO/CGO Composite Anode for SOFC by 3D Inkjet Printing Combined with Laser Treatment

AU - Bagishev, A. S.

AU - Mal’bakhova, I. M.

AU - Vorob’ev, A. M.

AU - Borisenko, T. A.

AU - Asmed’yanova, A. D.

AU - Titkov, A. I.

AU - Nemudryi, A. P.

N1 - Funding Information: This study was supported by the Russian Scientific Foundation (grant no 21-79-30051). Publisher Copyright: © 2022, Pleiades Publishing, Ltd.

PY - 2022/7

Y1 - 2022/7

N2 - A composition of the paste used in printing SOFC anodes is developed on the basis of nanosized nickel oxide and gadolinia-stabilized ceria with the aim of 3D inkjet printing followed by laser and thermal sintering. The parameters of the anode paste such as the size distribution of particles and the viscosity are determined. A SOFC anode sample is printed by means of a laboratory 3D printer equipped with a metering system for inkjet printing and also by a module for laser treatment. Experiments are carried out on printing three-dimensional test objects with the use of the developed ceramic paste. These samples are studied by a complex of physicochemical methods for determination of morphological and structural characteristics.

AB - A composition of the paste used in printing SOFC anodes is developed on the basis of nanosized nickel oxide and gadolinia-stabilized ceria with the aim of 3D inkjet printing followed by laser and thermal sintering. The parameters of the anode paste such as the size distribution of particles and the viscosity are determined. A SOFC anode sample is printed by means of a laboratory 3D printer equipped with a metering system for inkjet printing and also by a module for laser treatment. Experiments are carried out on printing three-dimensional test objects with the use of the developed ceramic paste. These samples are studied by a complex of physicochemical methods for determination of morphological and structural characteristics.

KW - 3D printing

KW - additive manufacturing technologies

KW - fuel cells

KW - hydrogen

UR - http://www.scopus.com/inward/record.url?scp=85134394261&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/788545ef-977f-3856-bcbb-18eb891e85f7/

U2 - 10.1134/S1023193522070047

DO - 10.1134/S1023193522070047

M3 - Article

AN - SCOPUS:85134394261

VL - 58

SP - 600

EP - 605

JO - Russian Journal of Electrochemistry

JF - Russian Journal of Electrochemistry

SN - 1023-1935

IS - 7

ER -

ID: 36746154