Standard

In-situ imaging of tungsten surface modification under ITER-like transient heat loads. / Vasilyev, A. A.; Arakcheev, A. S.; Bataev, I. A. и др.

в: Nuclear Materials and Energy, Том 12, 01.08.2017, стр. 553-558.

Результаты исследований: Научные публикации в периодических изданияхстатьяРецензирование

Harvard

Vasilyev, AA, Arakcheev, AS, Bataev, IA, Bataev, VA, Burdakov, AV, Kandaurov, IV, Kasatov, AA, Kurkuchekov, VV, Mekler, KI, Popov, VA, Shoshin, AA, Skovorodin, DI, Trunev, YA & Vyacheslavov, LN 2017, 'In-situ imaging of tungsten surface modification under ITER-like transient heat loads', Nuclear Materials and Energy, Том. 12, стр. 553-558. https://doi.org/10.1016/j.nme.2016.11.017

APA

Vasilyev, A. A., Arakcheev, A. S., Bataev, I. A., Bataev, V. A., Burdakov, A. V., Kandaurov, I. V., Kasatov, A. A., Kurkuchekov, V. V., Mekler, K. I., Popov, V. A., Shoshin, A. A., Skovorodin, D. I., Trunev, Y. A., & Vyacheslavov, L. N. (2017). In-situ imaging of tungsten surface modification under ITER-like transient heat loads. Nuclear Materials and Energy, 12, 553-558. https://doi.org/10.1016/j.nme.2016.11.017

Vancouver

Vasilyev AA, Arakcheev AS, Bataev IA, Bataev VA, Burdakov AV, Kandaurov IV и др. In-situ imaging of tungsten surface modification under ITER-like transient heat loads. Nuclear Materials and Energy. 2017 авг. 1;12:553-558. doi: 10.1016/j.nme.2016.11.017

Author

Vasilyev, A. A. ; Arakcheev, A. S. ; Bataev, I. A. и др. / In-situ imaging of tungsten surface modification under ITER-like transient heat loads. в: Nuclear Materials and Energy. 2017 ; Том 12. стр. 553-558.

BibTeX

@article{ca36c428f7c34acdb2c9570126139330,
title = "In-situ imaging of tungsten surface modification under ITER-like transient heat loads",
abstract = "Experimental research on behavior of rolled tungsten plates under intense transient heat loads generated by a powerful (a total power of up to 7 MW) long-pulse (0.1–0.3 ms) electron beam with full irradiation area of 2 cm2 was carried out. Imaging of the sample by the fast CCD cameras in the NIR range and with illumination by the 532 nm continuous-wave laser was applied for in-situ surface diagnostics during exposure. In these experiments tungsten plates were exposed to heat loads 0.5–1 MJ/m2 with a heat flux factor (Fhf) close to and above the melting threshold of tungsten at initial room temperature. Crack formation and crack propagation under the surface layer were observed during multiple exposures. Overheated areas with excessive temperature over surrounding surface of about 500 K were found on severely damaged samples more than 5 ms after beam ending. The application of laser illumination enables to detect areas of intense tungsten melting near crack edges and crack intersections.",
keywords = "PULSE ELECTRON-BEAM, QSPA KH-50, SIMULATION, ELMS",
author = "Vasilyev, {A. A.} and Arakcheev, {A. S.} and Bataev, {I. A.} and Bataev, {V. A.} and Burdakov, {A. V.} and Kandaurov, {I. V.} and Kasatov, {A. A.} and Kurkuchekov, {V. V.} and Mekler, {K. I.} and Popov, {V. A.} and Shoshin, {A. A.} and Skovorodin, {D. I.} and Trunev, {Yu A.} and Vyacheslavov, {L. N.}",
note = "Publisher Copyright: {\textcopyright} 2016 The Authors",
year = "2017",
month = aug,
day = "1",
doi = "10.1016/j.nme.2016.11.017",
language = "English",
volume = "12",
pages = "553--558",
journal = "Nuclear Materials and Energy",
issn = "2352-1791",
publisher = "Elsevier Ltd",

}

RIS

TY - JOUR

T1 - In-situ imaging of tungsten surface modification under ITER-like transient heat loads

AU - Vasilyev, A. A.

AU - Arakcheev, A. S.

AU - Bataev, I. A.

AU - Bataev, V. A.

AU - Burdakov, A. V.

AU - Kandaurov, I. V.

AU - Kasatov, A. A.

AU - Kurkuchekov, V. V.

AU - Mekler, K. I.

AU - Popov, V. A.

AU - Shoshin, A. A.

AU - Skovorodin, D. I.

AU - Trunev, Yu A.

AU - Vyacheslavov, L. N.

N1 - Publisher Copyright: © 2016 The Authors

PY - 2017/8/1

Y1 - 2017/8/1

N2 - Experimental research on behavior of rolled tungsten plates under intense transient heat loads generated by a powerful (a total power of up to 7 MW) long-pulse (0.1–0.3 ms) electron beam with full irradiation area of 2 cm2 was carried out. Imaging of the sample by the fast CCD cameras in the NIR range and with illumination by the 532 nm continuous-wave laser was applied for in-situ surface diagnostics during exposure. In these experiments tungsten plates were exposed to heat loads 0.5–1 MJ/m2 with a heat flux factor (Fhf) close to and above the melting threshold of tungsten at initial room temperature. Crack formation and crack propagation under the surface layer were observed during multiple exposures. Overheated areas with excessive temperature over surrounding surface of about 500 K were found on severely damaged samples more than 5 ms after beam ending. The application of laser illumination enables to detect areas of intense tungsten melting near crack edges and crack intersections.

AB - Experimental research on behavior of rolled tungsten plates under intense transient heat loads generated by a powerful (a total power of up to 7 MW) long-pulse (0.1–0.3 ms) electron beam with full irradiation area of 2 cm2 was carried out. Imaging of the sample by the fast CCD cameras in the NIR range and with illumination by the 532 nm continuous-wave laser was applied for in-situ surface diagnostics during exposure. In these experiments tungsten plates were exposed to heat loads 0.5–1 MJ/m2 with a heat flux factor (Fhf) close to and above the melting threshold of tungsten at initial room temperature. Crack formation and crack propagation under the surface layer were observed during multiple exposures. Overheated areas with excessive temperature over surrounding surface of about 500 K were found on severely damaged samples more than 5 ms after beam ending. The application of laser illumination enables to detect areas of intense tungsten melting near crack edges and crack intersections.

KW - PULSE ELECTRON-BEAM

KW - QSPA KH-50

KW - SIMULATION

KW - ELMS

UR - http://www.scopus.com/inward/record.url?scp=85007216959&partnerID=8YFLogxK

U2 - 10.1016/j.nme.2016.11.017

DO - 10.1016/j.nme.2016.11.017

M3 - Article

AN - SCOPUS:85007216959

VL - 12

SP - 553

EP - 558

JO - Nuclear Materials and Energy

JF - Nuclear Materials and Energy

SN - 2352-1791

ER -

ID: 8975804