Standard

Heat transfer in flow around a rotary oscillating cylinder at a high subcritical Reynolds number : A computational study. / Hadžiabdić, M.; Palkin, E.; Mullyadzhanov, R. и др.

в: International Journal of Heat and Fluid Flow, Том 79, 108441, 01.10.2019.

Результаты исследований: Научные публикации в периодических изданияхстатьяРецензирование

Harvard

Hadžiabdić, M, Palkin, E, Mullyadzhanov, R & Hanjalić, K 2019, 'Heat transfer in flow around a rotary oscillating cylinder at a high subcritical Reynolds number: A computational study', International Journal of Heat and Fluid Flow, Том. 79, 108441. https://doi.org/10.1016/j.ijheatfluidflow.2019.108441

APA

Hadžiabdić, M., Palkin, E., Mullyadzhanov, R., & Hanjalić, K. (2019). Heat transfer in flow around a rotary oscillating cylinder at a high subcritical Reynolds number: A computational study. International Journal of Heat and Fluid Flow, 79, [108441]. https://doi.org/10.1016/j.ijheatfluidflow.2019.108441

Vancouver

Hadžiabdić M, Palkin E, Mullyadzhanov R, Hanjalić K. Heat transfer in flow around a rotary oscillating cylinder at a high subcritical Reynolds number: A computational study. International Journal of Heat and Fluid Flow. 2019 окт. 1;79:108441. doi: 10.1016/j.ijheatfluidflow.2019.108441

Author

Hadžiabdić, M. ; Palkin, E. ; Mullyadzhanov, R. и др. / Heat transfer in flow around a rotary oscillating cylinder at a high subcritical Reynolds number : A computational study. в: International Journal of Heat and Fluid Flow. 2019 ; Том 79.

BibTeX

@article{6ceed6c284a34f09a35d7642eddb7537,
title = "Heat transfer in flow around a rotary oscillating cylinder at a high subcritical Reynolds number: A computational study",
abstract = "We studied numerically the heat transfer in flow over a rotationally oscillating cylinder at a subcritical Reynolds number (Re=1.4×105) that is an order of magnitude higher than previously reported in the literature. This paper is a follow-up of the earlier study of hydrodynamics and drag force in a range of forcing frequencies and amplitudes (Palkin et al., 2018). This time we focus on heat transfer and its correlation with the observed flow field and vortical patterns. Four forcing frequencies f=fe/f0=0,1,2.5,4 for two forcing amplitudes Ω=ΩeD/2U∞=1 and 2 are considered, where f0 is the natural vortex-shedding frequency, U∞ the free-stream velocity and D the cylinder diameter. The parametric study was performed by solving three-dimensional unsteady Reynolds-averaged Navier–Stokes (URANS) equations closed by a wall-integrated second-moment (Re-stress) model, verified earlier by Large-eddy simulations and experiments in several reference cases including flows over a stagnant, as well as rotary oscillating cylinders at the same Re number. The thermal field, treated as a passive scalar, was obtained from the simultaneous solution of the energy equation, closed by the standard (GGDH) anisotropic eddy-diffusivity model. The computations showed that for the unforced cylinder heat transfer is characterized by very high local rates due to a strong thinning of the thermal boundary layer as a result of the impact and interactions of large coherent structures with the wall. The overall average Nusselt number does not change much for the forced cylinder but its time-averaged, phase-averaged and instantaneous circumferential profiles show some profound differences compared to the stationary cylinder. The distribution of Nu on the back surface becomes more uniform with less frequent occurrence of high values, especially for the higher frequencies f=2.5 and f=4. This is attributed to diminishing of the mean-recirculation zone as well as to the overall suppression of turbulent fluctuations. The rotary oscillation of the cylinder appears potentially efficient in achieving a more uniform circumferential distribution of Nu and avoiding local overheats and hot spots.",
keywords = "Flow control, Heat transfer, Rotating cylinder, URANS, FORCED-CONVECTION, TRANSFER ENHANCEMENT, VIBRATION, WAKE, TRANSITION, LARGE-EDDY SIMULATION, CIRCULAR-CYLINDER, CROSS-FLOW, DYNAMICS, TURBULENCE",
author = "M. Had{\v z}iabdi{\'c} and E. Palkin and R. Mullyadzhanov and K. Hanjali{\'c}",
year = "2019",
month = oct,
day = "1",
doi = "10.1016/j.ijheatfluidflow.2019.108441",
language = "English",
volume = "79",
journal = "International Journal of Heat and Fluid Flow",
issn = "0142-727X",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Heat transfer in flow around a rotary oscillating cylinder at a high subcritical Reynolds number

T2 - A computational study

AU - Hadžiabdić, M.

AU - Palkin, E.

AU - Mullyadzhanov, R.

AU - Hanjalić, K.

PY - 2019/10/1

Y1 - 2019/10/1

N2 - We studied numerically the heat transfer in flow over a rotationally oscillating cylinder at a subcritical Reynolds number (Re=1.4×105) that is an order of magnitude higher than previously reported in the literature. This paper is a follow-up of the earlier study of hydrodynamics and drag force in a range of forcing frequencies and amplitudes (Palkin et al., 2018). This time we focus on heat transfer and its correlation with the observed flow field and vortical patterns. Four forcing frequencies f=fe/f0=0,1,2.5,4 for two forcing amplitudes Ω=ΩeD/2U∞=1 and 2 are considered, where f0 is the natural vortex-shedding frequency, U∞ the free-stream velocity and D the cylinder diameter. The parametric study was performed by solving three-dimensional unsteady Reynolds-averaged Navier–Stokes (URANS) equations closed by a wall-integrated second-moment (Re-stress) model, verified earlier by Large-eddy simulations and experiments in several reference cases including flows over a stagnant, as well as rotary oscillating cylinders at the same Re number. The thermal field, treated as a passive scalar, was obtained from the simultaneous solution of the energy equation, closed by the standard (GGDH) anisotropic eddy-diffusivity model. The computations showed that for the unforced cylinder heat transfer is characterized by very high local rates due to a strong thinning of the thermal boundary layer as a result of the impact and interactions of large coherent structures with the wall. The overall average Nusselt number does not change much for the forced cylinder but its time-averaged, phase-averaged and instantaneous circumferential profiles show some profound differences compared to the stationary cylinder. The distribution of Nu on the back surface becomes more uniform with less frequent occurrence of high values, especially for the higher frequencies f=2.5 and f=4. This is attributed to diminishing of the mean-recirculation zone as well as to the overall suppression of turbulent fluctuations. The rotary oscillation of the cylinder appears potentially efficient in achieving a more uniform circumferential distribution of Nu and avoiding local overheats and hot spots.

AB - We studied numerically the heat transfer in flow over a rotationally oscillating cylinder at a subcritical Reynolds number (Re=1.4×105) that is an order of magnitude higher than previously reported in the literature. This paper is a follow-up of the earlier study of hydrodynamics and drag force in a range of forcing frequencies and amplitudes (Palkin et al., 2018). This time we focus on heat transfer and its correlation with the observed flow field and vortical patterns. Four forcing frequencies f=fe/f0=0,1,2.5,4 for two forcing amplitudes Ω=ΩeD/2U∞=1 and 2 are considered, where f0 is the natural vortex-shedding frequency, U∞ the free-stream velocity and D the cylinder diameter. The parametric study was performed by solving three-dimensional unsteady Reynolds-averaged Navier–Stokes (URANS) equations closed by a wall-integrated second-moment (Re-stress) model, verified earlier by Large-eddy simulations and experiments in several reference cases including flows over a stagnant, as well as rotary oscillating cylinders at the same Re number. The thermal field, treated as a passive scalar, was obtained from the simultaneous solution of the energy equation, closed by the standard (GGDH) anisotropic eddy-diffusivity model. The computations showed that for the unforced cylinder heat transfer is characterized by very high local rates due to a strong thinning of the thermal boundary layer as a result of the impact and interactions of large coherent structures with the wall. The overall average Nusselt number does not change much for the forced cylinder but its time-averaged, phase-averaged and instantaneous circumferential profiles show some profound differences compared to the stationary cylinder. The distribution of Nu on the back surface becomes more uniform with less frequent occurrence of high values, especially for the higher frequencies f=2.5 and f=4. This is attributed to diminishing of the mean-recirculation zone as well as to the overall suppression of turbulent fluctuations. The rotary oscillation of the cylinder appears potentially efficient in achieving a more uniform circumferential distribution of Nu and avoiding local overheats and hot spots.

KW - Flow control

KW - Heat transfer

KW - Rotating cylinder

KW - URANS

KW - FORCED-CONVECTION

KW - TRANSFER ENHANCEMENT

KW - VIBRATION

KW - WAKE

KW - TRANSITION

KW - LARGE-EDDY SIMULATION

KW - CIRCULAR-CYLINDER

KW - CROSS-FLOW

KW - DYNAMICS

KW - TURBULENCE

UR - http://www.scopus.com/inward/record.url?scp=85068925770&partnerID=8YFLogxK

U2 - 10.1016/j.ijheatfluidflow.2019.108441

DO - 10.1016/j.ijheatfluidflow.2019.108441

M3 - Article

AN - SCOPUS:85068925770

VL - 79

JO - International Journal of Heat and Fluid Flow

JF - International Journal of Heat and Fluid Flow

SN - 0142-727X

M1 - 108441

ER -

ID: 20850804