Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование
Efficient Production of Segmented Carbon Nanofibers via Catalytic Decomposition of Trichloroethylene over Ni-W Catalyst. / Potylitsyna, Arina R; Rudneva, Yuliya V; Bauman, Yury I и др.
в: Materials, Том 16, № 2, 845, 15.01.2023.Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование
}
TY - JOUR
T1 - Efficient Production of Segmented Carbon Nanofibers via Catalytic Decomposition of Trichloroethylene over Ni-W Catalyst
AU - Potylitsyna, Arina R
AU - Rudneva, Yuliya V
AU - Bauman, Yury I
AU - Plyusnin, Pavel E
AU - Stoyanovskii, Vladimir O
AU - Gerasimov, Evgeny Y
AU - Vedyagin, Aleksey A
AU - Shubin, Yury V
AU - Mishakov, Ilya V
N1 - Funding: The research was supported by the Ministry of Science and Higher Education of the Russian Federation [projects No. 121031700315-2 and AAAA-A21-121011390054-1]. The XRD studies were supported by the Russian Science Foundation (project No. 21-13-00414), https://rscf.ru/en/project/21-13-00414/, NIIC SB RAS.
PY - 2023/1/15
Y1 - 2023/1/15
N2 - The catalytic utilization of chlorine-organic wastes remains of extreme importance from an ecological point of view. Depending on the molecular structure of the chlorine-substituted hydrocarbon (presence of unsaturated bonds, intermolecular chlorine-to-hydrogen ratio), the features of its catalytic decomposition can be significantly different. Often, 1,2-dichloroethane is used as a model substrate. In the present work, the catalytic decomposition of trichloroethylene (C2HCl3) over microdispersed 100Ni and 96Ni-4W with the formation of carbon nanofibers (CNF) was studied. Catalysts were obtained by a co-precipitation of complex salts followed by reductive thermolysis. The disintegration of the initial bulk alloy driven by its interaction with the reaction mixture C2HCl3/H2/Ar entails the formation of submicron active particles. It has been established that the optimal activity of the pristine Ni catalyst and the 96Ni-4W alloy is provided in temperature ranges of 500-650 °C and 475-725 °C, respectively. The maximum yield of CNF for 2 h of reaction was 63 g/gcat for 100Ni and 112 g/gcat for 96Ni-4W catalyst. Longevity tests showed that nickel undergoes fast deactivation (after 3 h), whereas the 96Ni-4W catalyst remains active for 7 h of interaction. The effects of the catalyst's composition and the reaction temperature upon the structural and morphological characteristics of synthesized carbon nanofibers were investigated by X-ray diffraction analysis, Raman spectroscopy, and electron microscopies. The initial stages of the carbon erosion process were precisely examined by transmission electron microscopy coupled with elemental mapping. The segmented structure of CNF was found to be prevailing in a range of 500-650 °C. The textural parameters of carbon product (SBET and Vpore) were shown to reach maximum values (374 m2/g and 0.71 cm3/g, respectively) at the reaction temperature of 550 °C.
AB - The catalytic utilization of chlorine-organic wastes remains of extreme importance from an ecological point of view. Depending on the molecular structure of the chlorine-substituted hydrocarbon (presence of unsaturated bonds, intermolecular chlorine-to-hydrogen ratio), the features of its catalytic decomposition can be significantly different. Often, 1,2-dichloroethane is used as a model substrate. In the present work, the catalytic decomposition of trichloroethylene (C2HCl3) over microdispersed 100Ni and 96Ni-4W with the formation of carbon nanofibers (CNF) was studied. Catalysts were obtained by a co-precipitation of complex salts followed by reductive thermolysis. The disintegration of the initial bulk alloy driven by its interaction with the reaction mixture C2HCl3/H2/Ar entails the formation of submicron active particles. It has been established that the optimal activity of the pristine Ni catalyst and the 96Ni-4W alloy is provided in temperature ranges of 500-650 °C and 475-725 °C, respectively. The maximum yield of CNF for 2 h of reaction was 63 g/gcat for 100Ni and 112 g/gcat for 96Ni-4W catalyst. Longevity tests showed that nickel undergoes fast deactivation (after 3 h), whereas the 96Ni-4W catalyst remains active for 7 h of interaction. The effects of the catalyst's composition and the reaction temperature upon the structural and morphological characteristics of synthesized carbon nanofibers were investigated by X-ray diffraction analysis, Raman spectroscopy, and electron microscopies. The initial stages of the carbon erosion process were precisely examined by transmission electron microscopy coupled with elemental mapping. The segmented structure of CNF was found to be prevailing in a range of 500-650 °C. The textural parameters of carbon product (SBET and Vpore) were shown to reach maximum values (374 m2/g and 0.71 cm3/g, respectively) at the reaction temperature of 550 °C.
KW - carbon erosion
KW - carbon nanofibers
KW - carbon nanomaterials
KW - nickel
KW - trichloroethylene
KW - tungsten
UR - https://www.scopus.com/record/display.uri?eid=2-s2.0-85146421470&origin=inward&txGid=650f6e2b5a5657e31831cbe0c07e2866
UR - https://www.mendeley.com/catalogue/165a3fbb-4a43-386e-8e5a-04d2cbda0fea/
U2 - 10.3390/ma16020845
DO - 10.3390/ma16020845
M3 - Article
C2 - 36676584
VL - 16
JO - Materials
JF - Materials
SN - 1996-1944
IS - 2
M1 - 845
ER -
ID: 43659670