Standard

Behavior of hydrofoil cavitation in a slit channel. / Kravtsova, Aleksandra Yu; Tsoy, Mikhail A.; Skripkin, Sergey G. и др.

в: International Journal of Heat and Mass Transfer, Том 232, 125974, 01.11.2024.

Результаты исследований: Научные публикации в периодических изданияхстатьяРецензирование

Harvard

Kravtsova, AY, Tsoy, MA, Skripkin, SG, Litvinova, DV, Sikovsky, DP & Markovich, DM 2024, 'Behavior of hydrofoil cavitation in a slit channel', International Journal of Heat and Mass Transfer, Том. 232, 125974. https://doi.org/10.1016/j.ijheatmasstransfer.2024.125974

APA

Kravtsova, A. Y., Tsoy, M. A., Skripkin, S. G., Litvinova, D. V., Sikovsky, D. P., & Markovich, D. M. (2024). Behavior of hydrofoil cavitation in a slit channel. International Journal of Heat and Mass Transfer, 232, [125974]. https://doi.org/10.1016/j.ijheatmasstransfer.2024.125974

Vancouver

Kravtsova AY, Tsoy MA, Skripkin SG, Litvinova DV, Sikovsky DP, Markovich DM. Behavior of hydrofoil cavitation in a slit channel. International Journal of Heat and Mass Transfer. 2024 нояб. 1;232:125974. doi: 10.1016/j.ijheatmasstransfer.2024.125974

Author

Kravtsova, Aleksandra Yu ; Tsoy, Mikhail A. ; Skripkin, Sergey G. и др. / Behavior of hydrofoil cavitation in a slit channel. в: International Journal of Heat and Mass Transfer. 2024 ; Том 232.

BibTeX

@article{e8d2d552aea34f6f8279b2d4ab4d0c15,
title = "Behavior of hydrofoil cavitation in a slit channel",
abstract = "The paper presents the results of a cavitation in a slit channel study and offers an analytical description of cavity development. Special emphasis was placed on examining partial cavitation near a NACA 0012 hydrofoil (NACA – the National Advisory Committee for Aeronautics) inside slit channels of different geometries. Experimental investigation was carried out via high-speed imaging and the laser Doppler anemometry (LDA) method. The experimental data showed that the local flow velocity in hydrofoil leading edge area increased abruptly under arising cavitation. In addition, occurrence of cavitation raised flow velocity pulsation by 20%. In the case of a shorter channel, cavity growth occurred at higher cavitation numbers than for a longer channel. The cavity growth velocity was higher for a shorter channel. We showed that the tendency of partial cavitation development in the slit channel can be described as follows: L/C ∼ σ−1, where L is the cavity length; C is the hydrofoil chord; σ is the cavitation number; and parameter A changes as the slit channel length is varied. Comparison of cavitation development near hydrofoil at different attack angles α inside the slit channel with a three-dimensional (3D) cavitation tunnel was conducted. Cavitation in the slit channel occurred at lower σ/2α values compared to 3D cavitation flow around the hydrofoil. To directly compare lengths of the attached cavities arising in slit channels and 3D cavitation tunnels, an additional parameter is proposed, taking into account friction of the slit channel: K = λ·l/D. This parameter allowed us to quantitatively compare the characteristics of cavitating hydrofoils in slit channels and 3D tunnels. The paper provides the governing criteria of the cavitation in the slit channel. Our results propose the physical foundations for the development of cavities in the slit channel.",
keywords = "Cavitation in a slit channel, Cavity length, Governing criteria of cavitation in a slit channel, Hydrofoil, Laser Doppler anemometry",
author = "Kravtsova, {Aleksandra Yu} and Tsoy, {Mikhail A.} and Skripkin, {Sergey G.} and Litvinova, {Dariya V.} and Sikovsky, {Dmitrii Ph} and Markovich, {Dmitriy M.}",
note = "The analytical and experimental study was supported by the Russian Science Foundation (Project No. 19-79-10217); the design and installation of the experimental setup were carried out in part within the framework of a state contract with the Institute of Thermophysics SB RAS.",
year = "2024",
month = nov,
day = "1",
doi = "10.1016/j.ijheatmasstransfer.2024.125974",
language = "English",
volume = "232",
journal = "International Journal of Heat and Mass Transfer",
issn = "0017-9310",
publisher = "Elsevier Ltd",

}

RIS

TY - JOUR

T1 - Behavior of hydrofoil cavitation in a slit channel

AU - Kravtsova, Aleksandra Yu

AU - Tsoy, Mikhail A.

AU - Skripkin, Sergey G.

AU - Litvinova, Dariya V.

AU - Sikovsky, Dmitrii Ph

AU - Markovich, Dmitriy M.

N1 - The analytical and experimental study was supported by the Russian Science Foundation (Project No. 19-79-10217); the design and installation of the experimental setup were carried out in part within the framework of a state contract with the Institute of Thermophysics SB RAS.

PY - 2024/11/1

Y1 - 2024/11/1

N2 - The paper presents the results of a cavitation in a slit channel study and offers an analytical description of cavity development. Special emphasis was placed on examining partial cavitation near a NACA 0012 hydrofoil (NACA – the National Advisory Committee for Aeronautics) inside slit channels of different geometries. Experimental investigation was carried out via high-speed imaging and the laser Doppler anemometry (LDA) method. The experimental data showed that the local flow velocity in hydrofoil leading edge area increased abruptly under arising cavitation. In addition, occurrence of cavitation raised flow velocity pulsation by 20%. In the case of a shorter channel, cavity growth occurred at higher cavitation numbers than for a longer channel. The cavity growth velocity was higher for a shorter channel. We showed that the tendency of partial cavitation development in the slit channel can be described as follows: L/C ∼ σ−1, where L is the cavity length; C is the hydrofoil chord; σ is the cavitation number; and parameter A changes as the slit channel length is varied. Comparison of cavitation development near hydrofoil at different attack angles α inside the slit channel with a three-dimensional (3D) cavitation tunnel was conducted. Cavitation in the slit channel occurred at lower σ/2α values compared to 3D cavitation flow around the hydrofoil. To directly compare lengths of the attached cavities arising in slit channels and 3D cavitation tunnels, an additional parameter is proposed, taking into account friction of the slit channel: K = λ·l/D. This parameter allowed us to quantitatively compare the characteristics of cavitating hydrofoils in slit channels and 3D tunnels. The paper provides the governing criteria of the cavitation in the slit channel. Our results propose the physical foundations for the development of cavities in the slit channel.

AB - The paper presents the results of a cavitation in a slit channel study and offers an analytical description of cavity development. Special emphasis was placed on examining partial cavitation near a NACA 0012 hydrofoil (NACA – the National Advisory Committee for Aeronautics) inside slit channels of different geometries. Experimental investigation was carried out via high-speed imaging and the laser Doppler anemometry (LDA) method. The experimental data showed that the local flow velocity in hydrofoil leading edge area increased abruptly under arising cavitation. In addition, occurrence of cavitation raised flow velocity pulsation by 20%. In the case of a shorter channel, cavity growth occurred at higher cavitation numbers than for a longer channel. The cavity growth velocity was higher for a shorter channel. We showed that the tendency of partial cavitation development in the slit channel can be described as follows: L/C ∼ σ−1, where L is the cavity length; C is the hydrofoil chord; σ is the cavitation number; and parameter A changes as the slit channel length is varied. Comparison of cavitation development near hydrofoil at different attack angles α inside the slit channel with a three-dimensional (3D) cavitation tunnel was conducted. Cavitation in the slit channel occurred at lower σ/2α values compared to 3D cavitation flow around the hydrofoil. To directly compare lengths of the attached cavities arising in slit channels and 3D cavitation tunnels, an additional parameter is proposed, taking into account friction of the slit channel: K = λ·l/D. This parameter allowed us to quantitatively compare the characteristics of cavitating hydrofoils in slit channels and 3D tunnels. The paper provides the governing criteria of the cavitation in the slit channel. Our results propose the physical foundations for the development of cavities in the slit channel.

KW - Cavitation in a slit channel

KW - Cavity length

KW - Governing criteria of cavitation in a slit channel

KW - Hydrofoil

KW - Laser Doppler anemometry

UR - https://www.scopus.com/record/display.uri?eid=2-s2.0-85199177480&origin=inward&txGid=d7ef618fe2bce3443f5e2f030a168922

UR - https://www.mendeley.com/catalogue/1d810d39-f1d1-3458-b826-ec2ff3acc3a7/

U2 - 10.1016/j.ijheatmasstransfer.2024.125974

DO - 10.1016/j.ijheatmasstransfer.2024.125974

M3 - Article

VL - 232

JO - International Journal of Heat and Mass Transfer

JF - International Journal of Heat and Mass Transfer

SN - 0017-9310

M1 - 125974

ER -

ID: 60390719