A new version of the large pressure jump (T-LPJ)method for dynamic study of pressure-initiated adsorptive cycles for heat storage and transformation

Standard

A new version of the large pressure jump (T-LPJ)method for dynamic study of pressure-initiated adsorptive cycles for heat storage and transformation. / Tokarev, M. M.; Zlobin, A. A.; Aristov, Yu I.

в: Energy, Том 179, 15.07.2019, стр. 542-548.

Результаты исследований: Научные публикации в периодических изданиях › статья › Рецензирование

BibTeX

@article{a98370912d624e918022f3244ed7a946,

title = "A new version of the large pressure jump (T-LPJ)method for dynamic study of pressure-initiated adsorptive cycles for heat storage and transformation",

abstract = "In this work, a new version of the Large Pressure Jump (LPJ)method was proposed for studying the ad/desorption dynamics on representative pieces of a real “adsorber - heat exchanger” (AdHEx)for adsorptive heat storage and transformation (AHST). The core of the new approach is a direct measurement of the temperature difference ΔT of a heat carrier at the inlet and outlet of the tested AdHEx fragment. This difference is caused by a jump/drop of the adsorptive pressure which has initiated adsorption/desorption process. The measurements are carried out for the working pair “methanol - composite LiCl/silica” under typical conditions of a new cycle “Heat from Cold” (HeCol). The new Thermal Large Pressure Jump (T-LPJ)method is advanced as compared with the common V-LPJ version as it provides useful information on the heat exchanged between the adsorbent bed and the heat carrier fluid. Such information is not available from the V-LPJ method. The T-LPJ is simple in realization and resembles the common procedure for dynamic evaluation of real pressure-initiated AHST units. The suggested method was verified by comparison with results previously reported for a HeCol prototype with the same adsorbent and cycle boundary conditions.",

keywords = "Adsorption dynamics, Adsorptive heat transformation, Characteristic time, HeCol cycle, Large pressure jump method, Specific heating power, PROTOTYPE, COLD",

author = "Tokarev, {M. M.} and Zlobin, {A. A.} and Aristov, {Yu I.}",

note = "Publisher Copyright: {\textcopyright} 2019 Elsevier Ltd",

year = "2019",

month = jul,

day = "15",

doi = "10.1016/j.energy.2019.04.164",

language = "English",

volume = "179",

pages = "542--548",

journal = "Energy",

issn = "0360-5442",

publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - A new version of the large pressure jump (T-LPJ)method for dynamic study of pressure-initiated adsorptive cycles for heat storage and transformation

AU - Tokarev, M. M.

AU - Zlobin, A. A.

AU - Aristov, Yu I.

PY - 2019/7/15

Y1 - 2019/7/15

N2 - In this work, a new version of the Large Pressure Jump (LPJ)method was proposed for studying the ad/desorption dynamics on representative pieces of a real “adsorber - heat exchanger” (AdHEx)for adsorptive heat storage and transformation (AHST). The core of the new approach is a direct measurement of the temperature difference ΔT of a heat carrier at the inlet and outlet of the tested AdHEx fragment. This difference is caused by a jump/drop of the adsorptive pressure which has initiated adsorption/desorption process. The measurements are carried out for the working pair “methanol - composite LiCl/silica” under typical conditions of a new cycle “Heat from Cold” (HeCol). The new Thermal Large Pressure Jump (T-LPJ)method is advanced as compared with the common V-LPJ version as it provides useful information on the heat exchanged between the adsorbent bed and the heat carrier fluid. Such information is not available from the V-LPJ method. The T-LPJ is simple in realization and resembles the common procedure for dynamic evaluation of real pressure-initiated AHST units. The suggested method was verified by comparison with results previously reported for a HeCol prototype with the same adsorbent and cycle boundary conditions.

AB - In this work, a new version of the Large Pressure Jump (LPJ)method was proposed for studying the ad/desorption dynamics on representative pieces of a real “adsorber - heat exchanger” (AdHEx)for adsorptive heat storage and transformation (AHST). The core of the new approach is a direct measurement of the temperature difference ΔT of a heat carrier at the inlet and outlet of the tested AdHEx fragment. This difference is caused by a jump/drop of the adsorptive pressure which has initiated adsorption/desorption process. The measurements are carried out for the working pair “methanol - composite LiCl/silica” under typical conditions of a new cycle “Heat from Cold” (HeCol). The new Thermal Large Pressure Jump (T-LPJ)method is advanced as compared with the common V-LPJ version as it provides useful information on the heat exchanged between the adsorbent bed and the heat carrier fluid. Such information is not available from the V-LPJ method. The T-LPJ is simple in realization and resembles the common procedure for dynamic evaluation of real pressure-initiated AHST units. The suggested method was verified by comparison with results previously reported for a HeCol prototype with the same adsorbent and cycle boundary conditions.

KW - Adsorption dynamics

KW - Adsorptive heat transformation

KW - Characteristic time

KW - HeCol cycle

KW - Large pressure jump method

KW - Specific heating power

KW - PROTOTYPE

KW - COLD

UR - http://www.scopus.com/inward/record.url?scp=85065827698&partnerID=8YFLogxK

U2 - 10.1016/j.energy.2019.04.164

DO - 10.1016/j.energy.2019.04.164

M3 - Article

AN - SCOPUS:85065827698

VL - 179

SP - 542

EP - 548

JO - Energy

JF - Energy

SN - 0360-5442

ER -

ID: 20181351