Standard

A fast methodology to assess the quality of coatings on rough 3D surfaces. / Barakhovskaia, Ella; Apicella, Luisa; Glushchuk, Andrey и др.

в: Diamond and Related Materials, Том 125, 108981, 05.2022.

Результаты исследований: Научные публикации в периодических изданияхстатьяРецензирование

Harvard

Barakhovskaia, E, Apicella, L, Glushchuk, A, Minetti, C & Iorio, CS 2022, 'A fast methodology to assess the quality of coatings on rough 3D surfaces', Diamond and Related Materials, Том. 125, 108981. https://doi.org/10.1016/j.diamond.2022.108981

APA

Barakhovskaia, E., Apicella, L., Glushchuk, A., Minetti, C., & Iorio, C. S. (2022). A fast methodology to assess the quality of coatings on rough 3D surfaces. Diamond and Related Materials, 125, [108981]. https://doi.org/10.1016/j.diamond.2022.108981

Vancouver

Barakhovskaia E, Apicella L, Glushchuk A, Minetti C, Iorio CS. A fast methodology to assess the quality of coatings on rough 3D surfaces. Diamond and Related Materials. 2022 май;125:108981. doi: 10.1016/j.diamond.2022.108981

Author

Barakhovskaia, Ella ; Apicella, Luisa ; Glushchuk, Andrey и др. / A fast methodology to assess the quality of coatings on rough 3D surfaces. в: Diamond and Related Materials. 2022 ; Том 125.

BibTeX

@article{cba8ad8c9f1b4ca1bdbb6c45fbf3bf0a,
title = "A fast methodology to assess the quality of coatings on rough 3D surfaces",
abstract = "In industrial applications, it is crucial to characterise the quality of coatings during and after the manufacturing process. It is then relevant to elaborate a reliable procedure allowing for rapid inspection and easy-to-assess quality check. In this paper, we tested a qualitative methodology based on mechanical and visual analyses allowing for easily finding suitable parameters to generate resistant and uniform multi-layered coatings. This qualitative criterion was tested and refined against quantitative measurements. We focussed on carbon-based materials whose remarkable properties could be exploited in many applications, including multilayer coatings as a promising anticorrosion solution in the metal industry and as enhanced surfaces for heat exchange devices. Dip-coating was used to create multilayer coatings on rough 3D objects starting from water solutions of CNT and pure graphene. Visual uniformity and adhesion were chosen as criteria to analyse coatings qualitatively, while samples' roughness and the number of dips were the variable parameters. Different behaviours of the coatings were observed for graphene and CNT. For both, we found a critical number of dips after which the coating loses adhesion and stops to be uniform. The proposed colour maps, summarising the qualitative coatings' assessment, could be used as a methodological reference to issue technological recommendations when using multilayer coatings for specific purposes.",
keywords = "Carbon nanotubes, Dipping, Graphene, Multilayer coating, Quality map, Roughness",
author = "Ella Barakhovskaia and Luisa Apicella and Andrey Glushchuk and Christophe Minetti and Iorio, {Carlo S.}",
note = "Funding Information: This work was done in the framework of Heat Transfer Prodex (2019–2020) project under the financial support of the Belgian Federal Science Policy Office . Publisher Copyright: {\textcopyright} 2022 Elsevier B.V.",
year = "2022",
month = may,
doi = "10.1016/j.diamond.2022.108981",
language = "English",
volume = "125",
journal = "Diamond and Related Materials",
issn = "0925-9635",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - A fast methodology to assess the quality of coatings on rough 3D surfaces

AU - Barakhovskaia, Ella

AU - Apicella, Luisa

AU - Glushchuk, Andrey

AU - Minetti, Christophe

AU - Iorio, Carlo S.

N1 - Funding Information: This work was done in the framework of Heat Transfer Prodex (2019–2020) project under the financial support of the Belgian Federal Science Policy Office . Publisher Copyright: © 2022 Elsevier B.V.

PY - 2022/5

Y1 - 2022/5

N2 - In industrial applications, it is crucial to characterise the quality of coatings during and after the manufacturing process. It is then relevant to elaborate a reliable procedure allowing for rapid inspection and easy-to-assess quality check. In this paper, we tested a qualitative methodology based on mechanical and visual analyses allowing for easily finding suitable parameters to generate resistant and uniform multi-layered coatings. This qualitative criterion was tested and refined against quantitative measurements. We focussed on carbon-based materials whose remarkable properties could be exploited in many applications, including multilayer coatings as a promising anticorrosion solution in the metal industry and as enhanced surfaces for heat exchange devices. Dip-coating was used to create multilayer coatings on rough 3D objects starting from water solutions of CNT and pure graphene. Visual uniformity and adhesion were chosen as criteria to analyse coatings qualitatively, while samples' roughness and the number of dips were the variable parameters. Different behaviours of the coatings were observed for graphene and CNT. For both, we found a critical number of dips after which the coating loses adhesion and stops to be uniform. The proposed colour maps, summarising the qualitative coatings' assessment, could be used as a methodological reference to issue technological recommendations when using multilayer coatings for specific purposes.

AB - In industrial applications, it is crucial to characterise the quality of coatings during and after the manufacturing process. It is then relevant to elaborate a reliable procedure allowing for rapid inspection and easy-to-assess quality check. In this paper, we tested a qualitative methodology based on mechanical and visual analyses allowing for easily finding suitable parameters to generate resistant and uniform multi-layered coatings. This qualitative criterion was tested and refined against quantitative measurements. We focussed on carbon-based materials whose remarkable properties could be exploited in many applications, including multilayer coatings as a promising anticorrosion solution in the metal industry and as enhanced surfaces for heat exchange devices. Dip-coating was used to create multilayer coatings on rough 3D objects starting from water solutions of CNT and pure graphene. Visual uniformity and adhesion were chosen as criteria to analyse coatings qualitatively, while samples' roughness and the number of dips were the variable parameters. Different behaviours of the coatings were observed for graphene and CNT. For both, we found a critical number of dips after which the coating loses adhesion and stops to be uniform. The proposed colour maps, summarising the qualitative coatings' assessment, could be used as a methodological reference to issue technological recommendations when using multilayer coatings for specific purposes.

KW - Carbon nanotubes

KW - Dipping

KW - Graphene

KW - Multilayer coating

KW - Quality map

KW - Roughness

UR - http://www.scopus.com/inward/record.url?scp=85127123376&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/d9315dd0-c0ff-3905-aa58-9d2eda79846f/

U2 - 10.1016/j.diamond.2022.108981

DO - 10.1016/j.diamond.2022.108981

M3 - Article

AN - SCOPUS:85127123376

VL - 125

JO - Diamond and Related Materials

JF - Diamond and Related Materials

SN - 0925-9635

M1 - 108981

ER -

ID: 35810356