TY - JOUR

T1 - 2D printed graphene conductive layers with high carrier mobility

AU - Yakimchuk, Evgenyi

AU - Soots, Regina

AU - Kotin, Igor

AU - Antonova, Irina

PY - 2017/12/1

Y1 - 2017/12/1

N2 - The comparison of different suspensions, obtained from the same material source subjected to electrochemical exfoliation and to analogous auxiliary treatments, but in different solutions, allowed choosing the most effective approach to obtaining graphene suspensions. It was found for the layers with a thickness of 10–20 nm printed from a water-based suspension that the sheet resistance was 5–10 kΩ/□, and the carrier mobility was equal to 30–40 cm2/V·s. The most important parameter determining the mobility of carriers in the films obtained from suspensions is found to be the flake thickness. The carrier mobility strongly decreased from ∼100 to 0.05 cm2/V·s when the flake thickness changed from one monolayer to few monolayers (up to ∼ 4–5 nm). This effect is most likely associated with the quality of the connection between the flakes. Only monolayer - bilayer flakes are capable of forming real connections in the film due to van-der-Waals forces.

AB - The comparison of different suspensions, obtained from the same material source subjected to electrochemical exfoliation and to analogous auxiliary treatments, but in different solutions, allowed choosing the most effective approach to obtaining graphene suspensions. It was found for the layers with a thickness of 10–20 nm printed from a water-based suspension that the sheet resistance was 5–10 kΩ/□, and the carrier mobility was equal to 30–40 cm2/V·s. The most important parameter determining the mobility of carriers in the films obtained from suspensions is found to be the flake thickness. The carrier mobility strongly decreased from ∼100 to 0.05 cm2/V·s when the flake thickness changed from one monolayer to few monolayers (up to ∼ 4–5 nm). This effect is most likely associated with the quality of the connection between the flakes. Only monolayer - bilayer flakes are capable of forming real connections in the film due to van-der-Waals forces.

KW - Electrochemical exfoliation

KW - Graphene suspensions

KW - Printed layer electric properties

KW - Water-based inks

KW - EXFOLIATED GRAPHENE

KW - OXIDE

KW - ELECTRONICS

UR - http://www.scopus.com/inward/record.url?scp=85029679800&partnerID=8YFLogxK

U2 - 10.1016/j.cap.2017.09.012

DO - 10.1016/j.cap.2017.09.012

M3 - Article

AN - SCOPUS:85029679800

VL - 17

SP - 1655

EP - 1661

JO - Current Applied Physics

JF - Current Applied Physics

SN - 1567-1739

IS - 12

ER -