Research output: Contribution to journal › Article › peer-review
Vortical structures and pressure pulsations in draft tube of a Francis-99 turbine at part load : RANS and hybrid RANS/LES analysis. / Gavrilov, A. A.; Sentyabov, A. V.; Dekterev, A. A. et al.
In: International Journal of Heat and Fluid Flow, Vol. 63, 01.02.2017, p. 158-171.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - Vortical structures and pressure pulsations in draft tube of a Francis-99 turbine at part load
T2 - RANS and hybrid RANS/LES analysis
AU - Gavrilov, A. A.
AU - Sentyabov, A. V.
AU - Dekterev, A. A.
AU - Hanjalić, K.
PY - 2017/2/1
Y1 - 2017/2/1
N2 - Recognizing the limitations of the conventional linear-eddy-viscosity (LEVM) Reynolds-averaged Navier–Stokes (RANS) models to reproduce complex three-dimensional unsteady flows in hydraulic machinery, we performed a comparative assessment of a second-moment (Re-stress model, RSM) RANS closure and a hybrid RANS/LES method in capturing the flow and vortical structures in the draft tube of a Francis hydroturbine at off-design conditions. Considered is a case of part load (PL) at a flow rate of only 35% of the best efficiency point (BEP) characterised by multiple unsteady vortex systems. Despite some remaining uncertainties in generating the inflow conditions, both approaches reproduced reasonably well the measured mean velocity and the rms of its fluctuations, as well as the pressure spectrum with peaks detecting the precessing vortex core. In contrast to the common LEVMs, the Re-stress closure showed sufficient receptivity to intrinsic unsteadiness and reproduced well the overall flow and vortical patterns as well as the associated pressure pulsations in accord with the experiments. The hybrid RANS/LES method gave similar predictions as the RSM, but resolving a wider range of scales, which however, showed no significant effect on the dynamics of the dominant processing vortex core and the pressure pulsations.
AB - Recognizing the limitations of the conventional linear-eddy-viscosity (LEVM) Reynolds-averaged Navier–Stokes (RANS) models to reproduce complex three-dimensional unsteady flows in hydraulic machinery, we performed a comparative assessment of a second-moment (Re-stress model, RSM) RANS closure and a hybrid RANS/LES method in capturing the flow and vortical structures in the draft tube of a Francis hydroturbine at off-design conditions. Considered is a case of part load (PL) at a flow rate of only 35% of the best efficiency point (BEP) characterised by multiple unsteady vortex systems. Despite some remaining uncertainties in generating the inflow conditions, both approaches reproduced reasonably well the measured mean velocity and the rms of its fluctuations, as well as the pressure spectrum with peaks detecting the precessing vortex core. In contrast to the common LEVMs, the Re-stress closure showed sufficient receptivity to intrinsic unsteadiness and reproduced well the overall flow and vortical patterns as well as the associated pressure pulsations in accord with the experiments. The hybrid RANS/LES method gave similar predictions as the RSM, but resolving a wider range of scales, which however, showed no significant effect on the dynamics of the dominant processing vortex core and the pressure pulsations.
KW - Hybrid RANS-LES
KW - Hydroturbine
KW - Second-moment closure
KW - Vortex rope
KW - TURBULENCE
KW - MODEL
KW - AVERAGED NAVIER-STOKES
KW - SIMULATION
UR - http://www.scopus.com/inward/record.url?scp=84979715931&partnerID=8YFLogxK
U2 - 10.1016/j.ijheatfluidflow.2016.05.007
DO - 10.1016/j.ijheatfluidflow.2016.05.007
M3 - Article
AN - SCOPUS:84979715931
VL - 63
SP - 158
EP - 171
JO - International Journal of Heat and Fluid Flow
JF - International Journal of Heat and Fluid Flow
SN - 0142-727X
ER -
ID: 10321840