Standard

Test results of boron carbide ceramics for ITER port protection. / Shoshin, Andrey; Burdakov, Alexander; Ivantsivskiy, Maxim et al.

In: Fusion Engineering and Design, Vol. 168, 112426, 07.2021.

Research output: Contribution to journal › Article › peer-review

Harvard

Shoshin, A, Burdakov, A, Ivantsivskiy, M, Polosatkin, S, Semenov, A, Sulyaev, Y, Zaitsev, E, Polozova, P, Taskaev, S, Kasatov, D, Shchudlo, I & Bikchurina, M 2021, 'Test results of boron carbide ceramics for ITER port protection', Fusion Engineering and Design, vol. 168, 112426. https://doi.org/10.1016/j.fusengdes.2021.112426

APA

Shoshin, A., Burdakov, A., Ivantsivskiy, M., Polosatkin, S., Semenov, A., Sulyaev, Y., Zaitsev, E., Polozova, P., Taskaev, S., Kasatov, D., Shchudlo, I., & Bikchurina, M. (2021). Test results of boron carbide ceramics for ITER port protection. Fusion Engineering and Design, 168, [112426]. https://doi.org/10.1016/j.fusengdes.2021.112426

Vancouver

Shoshin A, Burdakov A, Ivantsivskiy M, Polosatkin S, Semenov A, Sulyaev Y et al. Test results of boron carbide ceramics for ITER port protection. Fusion Engineering and Design. 2021 Jul;168:112426. doi: 10.1016/j.fusengdes.2021.112426

Author

Shoshin, Andrey ; Burdakov, Alexander ; Ivantsivskiy, Maxim et al. / Test results of boron carbide ceramics for ITER port protection. In: Fusion Engineering and Design. 2021 ; Vol. 168.

BibTeX

@article{298ea47065b5459d855b9b7caf66cc5d,
title = "Test results of boron carbide ceramics for ITER port protection",
abstract = "The results of long-term outgassing test of large quantities of ceramics, which is planned to be used in ITER diagnostic ports, are presented. The outgassing rate of boron carbide ceramics produced by Virial Ltd meets the requirements of the ITER Vacuum Handbook. Massive use of ceramics in ITER may create a significant gas load on the vacuum system that requires accurate analysis. Calculations of gas emission of Equatorial Port #11 were performed and it was demonstrated that a significant amount of ceramics can be used for neutron protection. Experiments on activation of ceramics and stainless steels by fast neutrons were carried out, which showed a rapid reduction of residual radioactivity and absence of hazardous impurities.",
keywords = "Boron carbide, ITER, Neutron activation, Outgassing test",
author = "Andrey Shoshin and Alexander Burdakov and Maxim Ivantsivskiy and Sergey Polosatkin and Alexey Semenov and Yuliy Sulyaev and Evgenii Zaitsev and Polina Polozova and Sergey Taskaev and Dmitrii Kasatov and Ivan Shchudlo and Marina Bikchurina",
note = "Funding Information: This work was performed under the contract 17706413348180000850/18-07 with the Institution ?Project Center ITER? (Rosatom). Neutron activation study was supported by the Russian Science Foundation (project no. 19-72-30005). Publisher Copyright: {\textcopyright} 2021 Elsevier B.V. Copyright: Copyright 2021 Elsevier B.V., All rights reserved.",
year = "2021",
month = jul,
doi = "10.1016/j.fusengdes.2021.112426",
language = "English",
volume = "168",
journal = "Fusion Engineering and Design",
issn = "0920-3796",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Test results of boron carbide ceramics for ITER port protection

AU - Shoshin, Andrey

AU - Burdakov, Alexander

AU - Ivantsivskiy, Maxim

AU - Polosatkin, Sergey

AU - Semenov, Alexey

AU - Sulyaev, Yuliy

AU - Zaitsev, Evgenii

AU - Polozova, Polina

AU - Taskaev, Sergey

AU - Kasatov, Dmitrii

AU - Shchudlo, Ivan

AU - Bikchurina, Marina

N1 - Funding Information: This work was performed under the contract 17706413348180000850/18-07 with the Institution ?Project Center ITER? (Rosatom). Neutron activation study was supported by the Russian Science Foundation (project no. 19-72-30005). Publisher Copyright: © 2021 Elsevier B.V. Copyright: Copyright 2021 Elsevier B.V., All rights reserved.

PY - 2021/7

Y1 - 2021/7

N2 - The results of long-term outgassing test of large quantities of ceramics, which is planned to be used in ITER diagnostic ports, are presented. The outgassing rate of boron carbide ceramics produced by Virial Ltd meets the requirements of the ITER Vacuum Handbook. Massive use of ceramics in ITER may create a significant gas load on the vacuum system that requires accurate analysis. Calculations of gas emission of Equatorial Port #11 were performed and it was demonstrated that a significant amount of ceramics can be used for neutron protection. Experiments on activation of ceramics and stainless steels by fast neutrons were carried out, which showed a rapid reduction of residual radioactivity and absence of hazardous impurities.

AB - The results of long-term outgassing test of large quantities of ceramics, which is planned to be used in ITER diagnostic ports, are presented. The outgassing rate of boron carbide ceramics produced by Virial Ltd meets the requirements of the ITER Vacuum Handbook. Massive use of ceramics in ITER may create a significant gas load on the vacuum system that requires accurate analysis. Calculations of gas emission of Equatorial Port #11 were performed and it was demonstrated that a significant amount of ceramics can be used for neutron protection. Experiments on activation of ceramics and stainless steels by fast neutrons were carried out, which showed a rapid reduction of residual radioactivity and absence of hazardous impurities.

KW - Boron carbide

KW - ITER

KW - Neutron activation

KW - Outgassing test

UR - http://www.scopus.com/inward/record.url?scp=85102075950&partnerID=8YFLogxK

U2 - 10.1016/j.fusengdes.2021.112426

DO - 10.1016/j.fusengdes.2021.112426

M3 - Article

AN - SCOPUS:85102075950

VL - 168

JO - Fusion Engineering and Design

JF - Fusion Engineering and Design

SN - 0920-3796

M1 - 112426

ER -

ID: 28012720