Standard

Technological characteristics of epoxy/carbon black composites. / Bannov, A. G.; Brester, A. E.; Shestakov, A. A. et al.

In: Materials Today: Proceedings, Vol. 31, 2020, p. 496-498.

Research output: Contribution to journal › Conference article › peer-review

Harvard

Bannov, AG, Brester, AE, Shestakov, AA, Popov, MV, Lapekin, NI & Krivyakin, GK 2020, 'Technological characteristics of epoxy/carbon black composites', Materials Today: Proceedings, vol. 31, pp. 496-498. https://doi.org/10.1016/j.matpr.2020.05.758

APA

Bannov, A. G., Brester, A. E., Shestakov, A. A., Popov, M. V., Lapekin, N. I., & Krivyakin, G. K. (2020). Technological characteristics of epoxy/carbon black composites. Materials Today: Proceedings, 31, 496-498. https://doi.org/10.1016/j.matpr.2020.05.758

Vancouver

Bannov AG, Brester AE, Shestakov AA, Popov MV, Lapekin NI, Krivyakin GK. Technological characteristics of epoxy/carbon black composites. Materials Today: Proceedings. 2020;31:496-498. doi: 10.1016/j.matpr.2020.05.758

Author

Bannov, A. G. ; Brester, A. E. ; Shestakov, A. A. et al. / Technological characteristics of epoxy/carbon black composites. In: Materials Today: Proceedings. 2020 ; Vol. 31. pp. 496-498.

BibTeX

@article{c21f230fab9a442f9800a732c5951fd6,
title = "Technological characteristics of epoxy/carbon black composites",
abstract = "The set of epoxy composites based on Alfa AesarTM carbon black (CB) (0-1.5 wt%) has been prepared. Dependence of shaft torque on the rotation frequency in batch mixer with overhead stirrer for epoxy/ CB system was obtained. Chemical resistance tests of epoxy resin/carbon black composites were carried out by sample immersion in 30% H2SO4 and 95% H2SO4. The increase of apparent viscosity of epoxy/CB mixture was observed for relatively low temperatures (30-40 °C). Immersion of epoxy/CB composite in concentrated H2SO4 induced strong oxidation of sample and mass loss. Dilution of sulfuric acid led to the mass gain of the composite sample due to the increased uptake. The improvement of chemical resistance of epoxy/CB composites was observed in 95% H2SO4",
keywords = "Carbon black, Chemical resistance, Epoxy resin, Uptake, Viscosity, FIBER, EPOXY, GRAPHITE",
author = "Bannov, {A. G.} and Brester, {A. E.} and Shestakov, {A. A.} and Popov, {M. V.} and Lapekin, {N. I.} and Krivyakin, {G. K.}",
note = "Funding Information: The work was carried out within a scope of State task of Ministry of Science and Higher Education of Russia (project no. FSUN-2020-0008 ). Publisher Copyright: {\textcopyright} 2020 Elsevier Ltd. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.; 6th International Russian-Kazakhstan Conference on Chemical Technologies of Functional Materials, RKFM 2020 ; Conference date: 09-04-2020 Through 10-04-2020",
year = "2020",
doi = "10.1016/j.matpr.2020.05.758",
language = "English",
volume = "31",
pages = "496--498",
journal = "Materials Today: Proceedings",
issn = "2214-7853",
publisher = "Elsevier Science B.V.",

}

RIS

TY - JOUR

T1 - Technological characteristics of epoxy/carbon black composites

AU - Bannov, A. G.

AU - Brester, A. E.

AU - Shestakov, A. A.

AU - Popov, M. V.

AU - Lapekin, N. I.

AU - Krivyakin, G. K.

N1 - Funding Information: The work was carried out within a scope of State task of Ministry of Science and Higher Education of Russia (project no. FSUN-2020-0008 ). Publisher Copyright: © 2020 Elsevier Ltd. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.

PY - 2020

Y1 - 2020

N2 - The set of epoxy composites based on Alfa AesarTM carbon black (CB) (0-1.5 wt%) has been prepared. Dependence of shaft torque on the rotation frequency in batch mixer with overhead stirrer for epoxy/ CB system was obtained. Chemical resistance tests of epoxy resin/carbon black composites were carried out by sample immersion in 30% H2SO4 and 95% H2SO4. The increase of apparent viscosity of epoxy/CB mixture was observed for relatively low temperatures (30-40 °C). Immersion of epoxy/CB composite in concentrated H2SO4 induced strong oxidation of sample and mass loss. Dilution of sulfuric acid led to the mass gain of the composite sample due to the increased uptake. The improvement of chemical resistance of epoxy/CB composites was observed in 95% H2SO4

AB - The set of epoxy composites based on Alfa AesarTM carbon black (CB) (0-1.5 wt%) has been prepared. Dependence of shaft torque on the rotation frequency in batch mixer with overhead stirrer for epoxy/ CB system was obtained. Chemical resistance tests of epoxy resin/carbon black composites were carried out by sample immersion in 30% H2SO4 and 95% H2SO4. The increase of apparent viscosity of epoxy/CB mixture was observed for relatively low temperatures (30-40 °C). Immersion of epoxy/CB composite in concentrated H2SO4 induced strong oxidation of sample and mass loss. Dilution of sulfuric acid led to the mass gain of the composite sample due to the increased uptake. The improvement of chemical resistance of epoxy/CB composites was observed in 95% H2SO4

KW - Carbon black

KW - Chemical resistance

KW - Epoxy resin

KW - Uptake

KW - Viscosity

KW - FIBER

KW - EPOXY

KW - GRAPHITE

UR - http://www.scopus.com/inward/record.url?scp=85096544953&partnerID=8YFLogxK

U2 - 10.1016/j.matpr.2020.05.758

DO - 10.1016/j.matpr.2020.05.758

M3 - Conference article

AN - SCOPUS:85096544953

VL - 31

SP - 496

EP - 498

JO - Materials Today: Proceedings

JF - Materials Today: Proceedings

SN - 2214-7853

T2 - 6th International Russian-Kazakhstan Conference on Chemical Technologies of Functional Materials, RKFM 2020

Y2 - 9 April 2020 through 10 April 2020

ER -

ID: 26141146