Research output: Contribution to journal › Article › peer-review
Structured nanocomposite catalysts of biofuels transformation into syngas and hydrogen: Design and performance. / Sadykov, V.; Mezentseva, N.; Simonov, M. et al.
In: International Journal of Hydrogen Energy, Vol. 40, No. 24, 29.06.2015, p. 7511-7522.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - Structured nanocomposite catalysts of biofuels transformation into syngas and hydrogen: Design and performance
AU - Sadykov, V.
AU - Mezentseva, N.
AU - Simonov, M.
AU - Smal, E.
AU - Arapova, M.
AU - Pavlova, S.
AU - Fedorova, Y.
AU - Chub, O.
AU - Bobrova, L.
AU - Kuzmin, V.
AU - Ishchenko, A.
AU - Krieger, T.
AU - Roger, A. C.
AU - Parkhomenko, K.
AU - Mirodatos, C.
AU - Smorygo, O.
AU - Ross, J.
PY - 2015/6/29
Y1 - 2015/6/29
N2 - Main features of structured catalysts performance in bio-fuels reforming into syngas at lab-scale and pilot-scale levels using specially designed reactors and kinetic installations allowing to broadly tune the operational parameters are presented. Effects of the nature of nanocomposite active component comprised of Ru + Ni nanoparticles on bulk/alumina-supported perovskite or Mn-Cr-O spinel, type of substrate (Ni-Al alloy and SiC(Al2O3)/Al-Si-O foam substrates, Fechraloy microchannel plates or gauzes protected by thin corundum layer), type of fuel (natural gas, ethanol, acetone, ethyl acetate glycerol), feed composition and temperature on yield of syngas/byproducts and performance stability are considered. The best performance in real feeds with syngas yield approaching equilibrium at short contact times without any heat/mass transfer effects along with a high thermochemical stability were demonstrated for catalyst on heat-conducting microchannel substrate. Oxygen addition to the feed in optimized amounts allows to suppress coking and stabilize performance even for the case of such reactive fuel as glycerol only slightly affecting syngas yield.
AB - Main features of structured catalysts performance in bio-fuels reforming into syngas at lab-scale and pilot-scale levels using specially designed reactors and kinetic installations allowing to broadly tune the operational parameters are presented. Effects of the nature of nanocomposite active component comprised of Ru + Ni nanoparticles on bulk/alumina-supported perovskite or Mn-Cr-O spinel, type of substrate (Ni-Al alloy and SiC(Al2O3)/Al-Si-O foam substrates, Fechraloy microchannel plates or gauzes protected by thin corundum layer), type of fuel (natural gas, ethanol, acetone, ethyl acetate glycerol), feed composition and temperature on yield of syngas/byproducts and performance stability are considered. The best performance in real feeds with syngas yield approaching equilibrium at short contact times without any heat/mass transfer effects along with a high thermochemical stability were demonstrated for catalyst on heat-conducting microchannel substrate. Oxygen addition to the feed in optimized amounts allows to suppress coking and stabilize performance even for the case of such reactive fuel as glycerol only slightly affecting syngas yield.
KW - Biofuels reforming
KW - Catalytic performance
KW - Coking stability
KW - Hydrogen and syngas
KW - Microchannel and foam substrates
KW - Nanocomposite active components
UR - http://www.scopus.com/inward/record.url?scp=84930378540&partnerID=8YFLogxK
U2 - 10.1016/j.ijhydene.2014.11.151
DO - 10.1016/j.ijhydene.2014.11.151
M3 - Article
AN - SCOPUS:84930378540
VL - 40
SP - 7511
EP - 7522
JO - International Journal of Hydrogen Energy
JF - International Journal of Hydrogen Energy
SN - 0360-3199
IS - 24
ER -
ID: 25394316