Standard

Sandy soil based foam concrete with ultra-small pore structure through in-situ mechanical frothing. / Zhu, Chengtian; Dong, Biqin; Lazorenko, Georgy et al.

In: Journal of Building Engineering, Vol. 91, 109675, 15.08.2024.

Research output: Contribution to journalArticlepeer-review

Harvard

Zhu, C, Dong, B, Lazorenko, G, Fang, G, Wang, Y & Zuo, J 2024, 'Sandy soil based foam concrete with ultra-small pore structure through in-situ mechanical frothing', Journal of Building Engineering, vol. 91, 109675. https://doi.org/10.1016/j.jobe.2024.109675

APA

Zhu, C., Dong, B., Lazorenko, G., Fang, G., Wang, Y., & Zuo, J. (2024). Sandy soil based foam concrete with ultra-small pore structure through in-situ mechanical frothing. Journal of Building Engineering, 91, [109675]. https://doi.org/10.1016/j.jobe.2024.109675

Vancouver

Zhu C, Dong B, Lazorenko G, Fang G, Wang Y, Zuo J. Sandy soil based foam concrete with ultra-small pore structure through in-situ mechanical frothing. Journal of Building Engineering. 2024 Aug 15;91:109675. doi: 10.1016/j.jobe.2024.109675

Author

Zhu, Chengtian ; Dong, Biqin ; Lazorenko, Georgy et al. / Sandy soil based foam concrete with ultra-small pore structure through in-situ mechanical frothing. In: Journal of Building Engineering. 2024 ; Vol. 91.

BibTeX

@article{36a885261cad4ab29b9e7a8ac792bdb6,
title = "Sandy soil based foam concrete with ultra-small pore structure through in-situ mechanical frothing",
abstract = "During the manufacturing of foam concrete, conventional chemical and physical foaming methods are still inadequate for regulating and stabilizing the bubble properties. In this work, a one-pot method, denoted as in-situ mechanical frothing, was proposed preparing foam concrete by vigorously stirring the mixture of water, cement, sandy soil, and foaming agent. Sandy soil (SS) was used in the content range of 25–75 % as cement replacement to decrease the binder consumption and reduce costs. The influence of in-situ mechanical frothing technology and SS dosage on the properties of paste rheology, pore structure, compressive strength, and thermal properties was investigated. The results showed that the average pore size of foam concrete prepared by this method is between 45.73 and 74.58 μm. The compressive strength of the formed foam concrete at dry density of 600–1000 kg/cm3 was 2.78–16.37 MPa, which was 85%–231 % higher than that the standard values. The incorporation of SS resulted in smaller and homogeneous pore structure in foam concrete. Moreover, foam concrete with 25–75 % SS dosage showed 7–40 % decrease in thermal conductivity. The overall analysis showed that the 25–50 % SS-incorporated foam concrete enabled achieving higher standard properties through in-situ mechanical frothing.",
keywords = "Foam concrete, Light-weight materials, Particle stabilized foam, Pore structures, Sandy soil",
author = "Chengtian Zhu and Biqin Dong and Georgy Lazorenko and Guohao Fang and Yanshuai Wang and Jiandong Zuo",
note = "The authors acknowledge financial supports from the National Key R&D Program of China (No. 2022YFB2602600), Natural Science Foundation of Guangdong Province (GD-HK Technology Cooperation Funding Scheme, No. 2023A0505010020), and Shenzhen Science and Technology Program (No. ZDSYS20220606100406016). In addition, the authors sincerely acknowledge the generosity of the Instrumental Analysis Center of Shenzhen University (Lihu Campus) for SEM measurements.",
year = "2024",
month = aug,
day = "15",
doi = "10.1016/j.jobe.2024.109675",
language = "English",
volume = "91",
journal = "Journal of Building Engineering",
issn = "2352-7102",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Sandy soil based foam concrete with ultra-small pore structure through in-situ mechanical frothing

AU - Zhu, Chengtian

AU - Dong, Biqin

AU - Lazorenko, Georgy

AU - Fang, Guohao

AU - Wang, Yanshuai

AU - Zuo, Jiandong

N1 - The authors acknowledge financial supports from the National Key R&D Program of China (No. 2022YFB2602600), Natural Science Foundation of Guangdong Province (GD-HK Technology Cooperation Funding Scheme, No. 2023A0505010020), and Shenzhen Science and Technology Program (No. ZDSYS20220606100406016). In addition, the authors sincerely acknowledge the generosity of the Instrumental Analysis Center of Shenzhen University (Lihu Campus) for SEM measurements.

PY - 2024/8/15

Y1 - 2024/8/15

N2 - During the manufacturing of foam concrete, conventional chemical and physical foaming methods are still inadequate for regulating and stabilizing the bubble properties. In this work, a one-pot method, denoted as in-situ mechanical frothing, was proposed preparing foam concrete by vigorously stirring the mixture of water, cement, sandy soil, and foaming agent. Sandy soil (SS) was used in the content range of 25–75 % as cement replacement to decrease the binder consumption and reduce costs. The influence of in-situ mechanical frothing technology and SS dosage on the properties of paste rheology, pore structure, compressive strength, and thermal properties was investigated. The results showed that the average pore size of foam concrete prepared by this method is between 45.73 and 74.58 μm. The compressive strength of the formed foam concrete at dry density of 600–1000 kg/cm3 was 2.78–16.37 MPa, which was 85%–231 % higher than that the standard values. The incorporation of SS resulted in smaller and homogeneous pore structure in foam concrete. Moreover, foam concrete with 25–75 % SS dosage showed 7–40 % decrease in thermal conductivity. The overall analysis showed that the 25–50 % SS-incorporated foam concrete enabled achieving higher standard properties through in-situ mechanical frothing.

AB - During the manufacturing of foam concrete, conventional chemical and physical foaming methods are still inadequate for regulating and stabilizing the bubble properties. In this work, a one-pot method, denoted as in-situ mechanical frothing, was proposed preparing foam concrete by vigorously stirring the mixture of water, cement, sandy soil, and foaming agent. Sandy soil (SS) was used in the content range of 25–75 % as cement replacement to decrease the binder consumption and reduce costs. The influence of in-situ mechanical frothing technology and SS dosage on the properties of paste rheology, pore structure, compressive strength, and thermal properties was investigated. The results showed that the average pore size of foam concrete prepared by this method is between 45.73 and 74.58 μm. The compressive strength of the formed foam concrete at dry density of 600–1000 kg/cm3 was 2.78–16.37 MPa, which was 85%–231 % higher than that the standard values. The incorporation of SS resulted in smaller and homogeneous pore structure in foam concrete. Moreover, foam concrete with 25–75 % SS dosage showed 7–40 % decrease in thermal conductivity. The overall analysis showed that the 25–50 % SS-incorporated foam concrete enabled achieving higher standard properties through in-situ mechanical frothing.

KW - Foam concrete

KW - Light-weight materials

KW - Particle stabilized foam

KW - Pore structures

KW - Sandy soil

UR - https://www.scopus.com/record/display.uri?eid=2-s2.0-85193757352&origin=inward&txGid=83467a9bca64fc7292e7a6d30e795b99

UR - https://www.mendeley.com/catalogue/3a38d03a-b40e-38dc-9c81-a060941bea28/

U2 - 10.1016/j.jobe.2024.109675

DO - 10.1016/j.jobe.2024.109675

M3 - Article

VL - 91

JO - Journal of Building Engineering

JF - Journal of Building Engineering

SN - 2352-7102

M1 - 109675

ER -

ID: 60816660