Research output: Contribution to journal › Article › peer-review
Preparation of the Nanostructured Ni-Mg-O Oxide System by a Sol–Gel Technique at Varied pH. / Veselov, Grigory B.; Karnaukhov, Timofey M.; Stoyanovskii, Vladimir O. et al.
In: Nanomaterials, Vol. 12, No. 6, 952, 01.03.2022.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - Preparation of the Nanostructured Ni-Mg-O Oxide System by a Sol–Gel Technique at Varied pH
AU - Veselov, Grigory B.
AU - Karnaukhov, Timofey M.
AU - Stoyanovskii, Vladimir O.
AU - Vedyagin, Aleksey A.
N1 - Funding Information: Funding: This work was supported by the Ministry of Science and Higher Education of the Russian Federation [project No. AAAA-A21-121011390054-1]. Publisher Copyright: © 2022 by the authors. Licensee MDPI, Basel, Switzerland.
PY - 2022/3/1
Y1 - 2022/3/1
N2 - In the present work, a series of two-component Ni-Mg-O oxide systems were prepared using a sol–gel technique at varied pH of hydrolysis procedure. The aqueous solutions of nitric acid or ammonia were added to control the pH values. The xerogel samples obtained after drying were analysed using a thermogravimetric approach. The oxide systems were characterized by a set of physicochemical methods (low-temperature nitrogen adsorption, X-ray diffraction analysis, scanning electron microscopy, UV-vis spectroscopy, and temperature-programmed reduction method). The thermal stability of the samples was examined in a testing reaction of CO oxidation in a prompt thermal aging regime. It was revealed that the pH value during the magnesium methoxide hydrolysis stage significantly affects the properties of the intermediate hydroxide and final oxide nanomaterials. The thermal decomposition of nitric acid or ammonia is accompanied by exothermal effects, which noticeably influence the textural characteristics. Moreover, the pH of the hydrolysing solution defines the strength of the nickel interaction with the MgO matrix. An increase in pH facilitates the formation of the Nix Mg1−x O solid solution with a higher amount of incorporated nickel, which is characterized by the reproducible broad temperature range of the hydrogen uptake and the enhanced thermal stability.
AB - In the present work, a series of two-component Ni-Mg-O oxide systems were prepared using a sol–gel technique at varied pH of hydrolysis procedure. The aqueous solutions of nitric acid or ammonia were added to control the pH values. The xerogel samples obtained after drying were analysed using a thermogravimetric approach. The oxide systems were characterized by a set of physicochemical methods (low-temperature nitrogen adsorption, X-ray diffraction analysis, scanning electron microscopy, UV-vis spectroscopy, and temperature-programmed reduction method). The thermal stability of the samples was examined in a testing reaction of CO oxidation in a prompt thermal aging regime. It was revealed that the pH value during the magnesium methoxide hydrolysis stage significantly affects the properties of the intermediate hydroxide and final oxide nanomaterials. The thermal decomposition of nitric acid or ammonia is accompanied by exothermal effects, which noticeably influence the textural characteristics. Moreover, the pH of the hydrolysing solution defines the strength of the nickel interaction with the MgO matrix. An increase in pH facilitates the formation of the Nix Mg1−x O solid solution with a higher amount of incorporated nickel, which is characterized by the reproducible broad temperature range of the hydrogen uptake and the enhanced thermal stability.
KW - Chemical looping
KW - Nanostructured MgO
KW - Ni-based system
KW - Sol–gel synthesis
KW - Thermal stability
UR - http://www.scopus.com/inward/record.url?scp=85126342077&partnerID=8YFLogxK
U2 - 10.3390/nano12060952
DO - 10.3390/nano12060952
M3 - Article
C2 - 35335765
AN - SCOPUS:85126342077
VL - 12
JO - Nanomaterials
JF - Nanomaterials
SN - 2079-4991
IS - 6
M1 - 952
ER -
ID: 35704535