Standard

Predictions of Flame Spread Rate Over Glass-Fiber-Reinforced Polymeric Materials in Opposed Flow. / Trubachev, S. A.; Shaklein, A. A.; Paletsky, A. A. et al.

In: Combustion Science and Technology, 12.02.2025.

Research output: Contribution to journal › Article › peer-review

Harvard

Trubachev, SA, Shaklein, AA, Paletsky, AA, Shmakov, AG, Kulikov, IV & Sosnin, EA 2025, 'Predictions of Flame Spread Rate Over Glass-Fiber-Reinforced Polymeric Materials in Opposed Flow', Combustion Science and Technology. https://doi.org/10.1080/00102202.2025.2464770

APA

Trubachev, S. A., Shaklein, A. A., Paletsky, A. A., Shmakov, A. G., Kulikov, I. V., & Sosnin, E. A. (2025). Predictions of Flame Spread Rate Over Glass-Fiber-Reinforced Polymeric Materials in Opposed Flow. Combustion Science and Technology. https://doi.org/10.1080/00102202.2025.2464770

Vancouver

Trubachev SA, Shaklein AA, Paletsky AA, Shmakov AG, Kulikov IV, Sosnin EA. Predictions of Flame Spread Rate Over Glass-Fiber-Reinforced Polymeric Materials in Opposed Flow. Combustion Science and Technology. 2025 Feb 12. doi: 10.1080/00102202.2025.2464770

Author

Trubachev, S. A. ; Shaklein, A. A. ; Paletsky, A. A. et al. / Predictions of Flame Spread Rate Over Glass-Fiber-Reinforced Polymeric Materials in Opposed Flow. In: Combustion Science and Technology. 2025.

BibTeX

@article{b1d95c2694674daba5558873f0c4225a,
title = "Predictions of Flame Spread Rate Over Glass-Fiber-Reinforced Polymeric Materials in Opposed Flow",
abstract = "The paper is devoted to the discussion of the possibility of predicting the rate of flame spread (ROS) over glass-fiber-reinforced epoxy resin (GFRER) in an opposed of N2/O2 mixture using three-dimensional numerical simulation in Fire Dynamics Simulator and the simplified solution for thermally thin fuels. In this study, ROS were experimentally obtained for 1.9 mm thick GFRERs based on ED-20 resin. The calibration of the exact solution formula modification is grounded in previous findings from GFRER studies on flame propagation rate. It was found that a simplified consideration of a complex composite material as a homogeneous pyrolyzed fuel in the model is applicable for a satisfactory prediction of the flame spread velocity. The ROS obtained from the Fire Dynamics Simulator modeling exceeds the measured values for downward cases; however, it more accurately represents the concentration trend compared to the simple formula. The obtained data can be used to develop and test more complex models of composite materials combustion.",
keywords = "Flame spread, exact solution, numerical modeling, opposed flow, polymer composites",
author = "Trubachev, {S. A.} and Shaklein, {A. A.} and Paletsky, {A. A.} and Shmakov, {A. G.} and Kulikov, {I. V.} and Sosnin, {E. A.}",
note = "This work was supported by the Russian Science Foundation [Project No. 22-79-10066].",
year = "2025",
month = feb,
day = "12",
doi = "10.1080/00102202.2025.2464770",
language = "English",
journal = "Combustion Science and Technology",
issn = "0010-2202",
publisher = "Taylor and Francis Ltd.",

}

RIS

TY - JOUR

T1 - Predictions of Flame Spread Rate Over Glass-Fiber-Reinforced Polymeric Materials in Opposed Flow

AU - Trubachev, S. A.

AU - Shaklein, A. A.

AU - Paletsky, A. A.

AU - Shmakov, A. G.

AU - Kulikov, I. V.

AU - Sosnin, E. A.

N1 - This work was supported by the Russian Science Foundation [Project No. 22-79-10066].

PY - 2025/2/12

Y1 - 2025/2/12

N2 - The paper is devoted to the discussion of the possibility of predicting the rate of flame spread (ROS) over glass-fiber-reinforced epoxy resin (GFRER) in an opposed of N2/O2 mixture using three-dimensional numerical simulation in Fire Dynamics Simulator and the simplified solution for thermally thin fuels. In this study, ROS were experimentally obtained for 1.9 mm thick GFRERs based on ED-20 resin. The calibration of the exact solution formula modification is grounded in previous findings from GFRER studies on flame propagation rate. It was found that a simplified consideration of a complex composite material as a homogeneous pyrolyzed fuel in the model is applicable for a satisfactory prediction of the flame spread velocity. The ROS obtained from the Fire Dynamics Simulator modeling exceeds the measured values for downward cases; however, it more accurately represents the concentration trend compared to the simple formula. The obtained data can be used to develop and test more complex models of composite materials combustion.

AB - The paper is devoted to the discussion of the possibility of predicting the rate of flame spread (ROS) over glass-fiber-reinforced epoxy resin (GFRER) in an opposed of N2/O2 mixture using three-dimensional numerical simulation in Fire Dynamics Simulator and the simplified solution for thermally thin fuels. In this study, ROS were experimentally obtained for 1.9 mm thick GFRERs based on ED-20 resin. The calibration of the exact solution formula modification is grounded in previous findings from GFRER studies on flame propagation rate. It was found that a simplified consideration of a complex composite material as a homogeneous pyrolyzed fuel in the model is applicable for a satisfactory prediction of the flame spread velocity. The ROS obtained from the Fire Dynamics Simulator modeling exceeds the measured values for downward cases; however, it more accurately represents the concentration trend compared to the simple formula. The obtained data can be used to develop and test more complex models of composite materials combustion.

KW - Flame spread

KW - exact solution

KW - numerical modeling

KW - opposed flow

KW - polymer composites

UR - https://www.mendeley.com/catalogue/2762566c-5126-3c48-b3a0-21524d87d536/

UR - https://www.scopus.com/record/display.uri?eid=2-s2.0-85218819923&origin=inward&txGid=b1c53b69531d880fb3fa47bf5105e4d2

U2 - 10.1080/00102202.2025.2464770

DO - 10.1080/00102202.2025.2464770

M3 - Article

JO - Combustion Science and Technology

JF - Combustion Science and Technology

SN - 0010-2202

ER -

ID: 64946954