Standard

Physical and Mechanical Properties of Nitrile Butadiene Rubber Modified by Single-Walled Carbon Nanotube Concentrates. / Karpunin, R. V.; Korotkov, M. S.; Skuratov, A. Yu et al.

In: Inorganic Materials: Applied Research, Vol. 13, No. 5, 10.2022, p. 1306-1313.

Research output: Contribution to journalArticlepeer-review

Harvard

Karpunin, RV, Korotkov, MS, Skuratov, AY & Khasin, AA 2022, 'Physical and Mechanical Properties of Nitrile Butadiene Rubber Modified by Single-Walled Carbon Nanotube Concentrates', Inorganic Materials: Applied Research, vol. 13, no. 5, pp. 1306-1313. https://doi.org/10.1134/S2075113322050197

APA

Karpunin, R. V., Korotkov, M. S., Skuratov, A. Y., & Khasin, A. A. (2022). Physical and Mechanical Properties of Nitrile Butadiene Rubber Modified by Single-Walled Carbon Nanotube Concentrates. Inorganic Materials: Applied Research, 13(5), 1306-1313. https://doi.org/10.1134/S2075113322050197

Vancouver

Karpunin RV, Korotkov MS, Skuratov AY, Khasin AA. Physical and Mechanical Properties of Nitrile Butadiene Rubber Modified by Single-Walled Carbon Nanotube Concentrates. Inorganic Materials: Applied Research. 2022 Oct;13(5):1306-1313. doi: 10.1134/S2075113322050197

Author

Karpunin, R. V. ; Korotkov, M. S. ; Skuratov, A. Yu et al. / Physical and Mechanical Properties of Nitrile Butadiene Rubber Modified by Single-Walled Carbon Nanotube Concentrates. In: Inorganic Materials: Applied Research. 2022 ; Vol. 13, No. 5. pp. 1306-1313.

BibTeX

@article{7a5555da60f04d9f868483d316180f56,
title = "Physical and Mechanical Properties of Nitrile Butadiene Rubber Modified by Single-Walled Carbon Nanotube Concentrates",
abstract = "Single-walled carbon nanotubes (SWCNTs) are used as a universal additive to increase the mechanical and electrical properties of materials. In this work, we introduced SWCNTs in nitrile butadiene rubbers filled with 60 phr carbon black using concentrates of predispersed SWCNTs in a solution of nitrile butadiene rubber with dibutyl phthalate. It is shown that the addition of 0.15 wt % of SWCNTs allowed decreasing the specific volume electrical resistivity by four orders from 2.3 × 106 to 7.9 × 102 Ω cm and increasing the tensile moduli at 50% and 100% elongation by 50% and 30%, respectively. The tensile moduli at 50% and 100% elongation and the tear resistance linearly depend on the concentration of SWCNTs in the nanocomposite for the studied concentration range up to 0.5 wt %, while the elongation at break and the tensile strength of the rubber do not change within the tolerance of measurements. The specific volume electrical resistivity depends on the concentration of SWCNTs in the rubber according to Kirkpatrick power law with a percolation threshold of 0.05 wt % and achieves 10 Ω cm at 0.5 wt % of SWCNTs.",
keywords = "concentrates, nitrile butadiene rubber, single-walled carbon nanotubes",
author = "Karpunin, {R. V.} and Korotkov, {M. S.} and Skuratov, {A. Yu} and Khasin, {A. A.}",
note = "Publisher Copyright: {\textcopyright} 2022, Pleiades Publishing, Ltd.",
year = "2022",
month = oct,
doi = "10.1134/S2075113322050197",
language = "English",
volume = "13",
pages = "1306--1313",
journal = "Inorganic Materials: Applied Research",
issn = "2075-1133",
publisher = "Pleiades Publishing",
number = "5",

}

RIS

TY - JOUR

T1 - Physical and Mechanical Properties of Nitrile Butadiene Rubber Modified by Single-Walled Carbon Nanotube Concentrates

AU - Karpunin, R. V.

AU - Korotkov, M. S.

AU - Skuratov, A. Yu

AU - Khasin, A. A.

N1 - Publisher Copyright: © 2022, Pleiades Publishing, Ltd.

PY - 2022/10

Y1 - 2022/10

N2 - Single-walled carbon nanotubes (SWCNTs) are used as a universal additive to increase the mechanical and electrical properties of materials. In this work, we introduced SWCNTs in nitrile butadiene rubbers filled with 60 phr carbon black using concentrates of predispersed SWCNTs in a solution of nitrile butadiene rubber with dibutyl phthalate. It is shown that the addition of 0.15 wt % of SWCNTs allowed decreasing the specific volume electrical resistivity by four orders from 2.3 × 106 to 7.9 × 102 Ω cm and increasing the tensile moduli at 50% and 100% elongation by 50% and 30%, respectively. The tensile moduli at 50% and 100% elongation and the tear resistance linearly depend on the concentration of SWCNTs in the nanocomposite for the studied concentration range up to 0.5 wt %, while the elongation at break and the tensile strength of the rubber do not change within the tolerance of measurements. The specific volume electrical resistivity depends on the concentration of SWCNTs in the rubber according to Kirkpatrick power law with a percolation threshold of 0.05 wt % and achieves 10 Ω cm at 0.5 wt % of SWCNTs.

AB - Single-walled carbon nanotubes (SWCNTs) are used as a universal additive to increase the mechanical and electrical properties of materials. In this work, we introduced SWCNTs in nitrile butadiene rubbers filled with 60 phr carbon black using concentrates of predispersed SWCNTs in a solution of nitrile butadiene rubber with dibutyl phthalate. It is shown that the addition of 0.15 wt % of SWCNTs allowed decreasing the specific volume electrical resistivity by four orders from 2.3 × 106 to 7.9 × 102 Ω cm and increasing the tensile moduli at 50% and 100% elongation by 50% and 30%, respectively. The tensile moduli at 50% and 100% elongation and the tear resistance linearly depend on the concentration of SWCNTs in the nanocomposite for the studied concentration range up to 0.5 wt %, while the elongation at break and the tensile strength of the rubber do not change within the tolerance of measurements. The specific volume electrical resistivity depends on the concentration of SWCNTs in the rubber according to Kirkpatrick power law with a percolation threshold of 0.05 wt % and achieves 10 Ω cm at 0.5 wt % of SWCNTs.

KW - concentrates

KW - nitrile butadiene rubber

KW - single-walled carbon nanotubes

UR - http://www.scopus.com/inward/record.url?scp=85139211656&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/ae762e8a-1140-36e8-b3a0-9591063471f7/

U2 - 10.1134/S2075113322050197

DO - 10.1134/S2075113322050197

M3 - Article

AN - SCOPUS:85139211656

VL - 13

SP - 1306

EP - 1313

JO - Inorganic Materials: Applied Research

JF - Inorganic Materials: Applied Research

SN - 2075-1133

IS - 5

ER -

ID: 38163678