Research output: Contribution to journal › Article › peer-review
Operating limits and features of direct air capture on K2CO3/ZrO2 composite sorbent. / Derevschikov, Vladimir S.; Veselovskaya, Janna V.; Shalygin, Anton S. et al.
In: Chinese Journal of Chemical Engineering, Vol. 46, 06.2022, p. 11-20.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - Operating limits and features of direct air capture on K2CO3/ZrO2 composite sorbent
AU - Derevschikov, Vladimir S.
AU - Veselovskaya, Janna V.
AU - Shalygin, Anton S.
AU - Yatsenko, Dmitry A.
AU - Sheshkovas, Andrey Z.
AU - Martyanov, Oleg N.
N1 - Funding Information: This work was supported by Russian Science Foundation (19-73-00079). The authors also thank Leonova A.A. for performing N 2 adsorption measurements. Publisher Copyright: © 2021
PY - 2022/6
Y1 - 2022/6
N2 - Potassium carbonate-based sorbents are prospective materials for direct air capture (DAC). In the present study, we examined and revealed the influence of the temperature swing adsorption (TSA) cycle conditions on the CO2 sorption properties of a novel aerogel-based K2CO3/ZrO2 sorbent in a DAC process. It was shown that the humidity and temperature drastically affect the sorption dynamic and sorption capacity of the sorbent. When a temperature at the sorption stage was 29 °C and a water vapor pressure PH2O in the feed air was 5.2 mbar (1 bar = 105 Pa), the composite material demonstrated a stable CO2 sorption capacity of 3.4% (mass). An increase in sorption temperature leads to a continuous decrease in the CO2 absorption capacity reaching a value of 0.7% (mass) at T = 80 °C. The material showed the retention of a stable CO2 sorption capacity for many cycles at each temperature in the range. Increasing PH2O in the inlet air from 5.2 to 6.8 mbar leads to instability of CO2 sorption capacity which decreases in the course of 3 consecutive TSA cycles from 1.7% to 0.8% (mass) at T = 29 °C. A further increase in air humidity only facilitates the deterioration of the CO2 sorption capacity of the material. A possible explanation for this phenomenon could be the filling of the porous system of the sorbent with solid reaction products and an aqueous solution of potassium salts, which leads to a significant slowdown in the CO2 diffusion in the composite sorbent grain. To investigate the regeneration step of the TSA cycle in situ, the macro ATR-FTIR (attenuated total reflection Fourier-transform infrared) spectroscopic imaging was applied for the first time. It was shown that the migration of carbonate-containing species over the surface of sorbent occurs during the thermal regeneration stage of the TSA cycle. The movement of the active component in the porous matrix of the sorbent can affect the sorption characteristics of the composite material. The revealed features make it possible to formulate the requirements and limitations that need to be taken into account for the practical implementation of the DAC process using the K2CO3/ZrO2 composite sorbent.
AB - Potassium carbonate-based sorbents are prospective materials for direct air capture (DAC). In the present study, we examined and revealed the influence of the temperature swing adsorption (TSA) cycle conditions on the CO2 sorption properties of a novel aerogel-based K2CO3/ZrO2 sorbent in a DAC process. It was shown that the humidity and temperature drastically affect the sorption dynamic and sorption capacity of the sorbent. When a temperature at the sorption stage was 29 °C and a water vapor pressure PH2O in the feed air was 5.2 mbar (1 bar = 105 Pa), the composite material demonstrated a stable CO2 sorption capacity of 3.4% (mass). An increase in sorption temperature leads to a continuous decrease in the CO2 absorption capacity reaching a value of 0.7% (mass) at T = 80 °C. The material showed the retention of a stable CO2 sorption capacity for many cycles at each temperature in the range. Increasing PH2O in the inlet air from 5.2 to 6.8 mbar leads to instability of CO2 sorption capacity which decreases in the course of 3 consecutive TSA cycles from 1.7% to 0.8% (mass) at T = 29 °C. A further increase in air humidity only facilitates the deterioration of the CO2 sorption capacity of the material. A possible explanation for this phenomenon could be the filling of the porous system of the sorbent with solid reaction products and an aqueous solution of potassium salts, which leads to a significant slowdown in the CO2 diffusion in the composite sorbent grain. To investigate the regeneration step of the TSA cycle in situ, the macro ATR-FTIR (attenuated total reflection Fourier-transform infrared) spectroscopic imaging was applied for the first time. It was shown that the migration of carbonate-containing species over the surface of sorbent occurs during the thermal regeneration stage of the TSA cycle. The movement of the active component in the porous matrix of the sorbent can affect the sorption characteristics of the composite material. The revealed features make it possible to formulate the requirements and limitations that need to be taken into account for the practical implementation of the DAC process using the K2CO3/ZrO2 composite sorbent.
KW - Carbon dioxide
KW - Direct air capture
KW - Fourier-transform infrared spectroscopic imaging
KW - Potassium carbonate
KW - Zirconia aerogel
UR - http://www.scopus.com/inward/record.url?scp=85129935647&partnerID=8YFLogxK
UR - https://www.mendeley.com/catalogue/f0e33a50-4bc9-3913-94ee-4dce306ea5b1/
U2 - 10.1016/j.cjche.2021.07.005
DO - 10.1016/j.cjche.2021.07.005
M3 - Article
AN - SCOPUS:85129935647
VL - 46
SP - 11
EP - 20
JO - Chinese Journal of Chemical Engineering
JF - Chinese Journal of Chemical Engineering
SN - 1004-9541
ER -
ID: 36107699