Research output: Contribution to journal › Article › peer-review
Neural nerwork approach for plug flow analysis in microchannels. / Seredkin, Alexander V.; Yagodnitsyna, Anna A.
In: Interfacial Phenomena and Heat Transfer, Vol. 10, No. 1, 2022, p. 15-24.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - Neural nerwork approach for plug flow analysis in microchannels
AU - Seredkin, Alexander V.
AU - Yagodnitsyna, Anna A.
N1 - Funding Information: This research was funded by the Russian Science Foundation (Grant No. 21-79-10307). Publisher Copyright: © 2022 by Begell House, Inc.
PY - 2022
Y1 - 2022
N2 - Liquid–liquid and gas–liquid flows in microchannels are widely utilized in various technological fields. The plug/droplet flow regime is preferable in many applications. The features of plugs and droplets, such as the length, vol-ume, and velocity, are critical parameters when developing new microchannel devices. The general approach employed to define plug features is based on image processing algorithms, in which the spatial filters are used in edge detec-tion. This approach’s main drawback consists of manually adjusting the parameters, such as the filter type, threshold, background removal procedure, etc. Here, we present a neural network approach for plug/droplet detection. A comprehensive data set for neural network training was compiled. The results of the neural network training are discussed, and a comparison with the image processing algorithm is provided. The proposed method has shown consistent numerical measurements. The average deviations of the measured plug size and velocity did not exceed 1.71% and 0.91%, respectively. New data on the plug size and velocity for an extremely low-viscosity ratio of the phases have been ob-tained.
AB - Liquid–liquid and gas–liquid flows in microchannels are widely utilized in various technological fields. The plug/droplet flow regime is preferable in many applications. The features of plugs and droplets, such as the length, vol-ume, and velocity, are critical parameters when developing new microchannel devices. The general approach employed to define plug features is based on image processing algorithms, in which the spatial filters are used in edge detec-tion. This approach’s main drawback consists of manually adjusting the parameters, such as the filter type, threshold, background removal procedure, etc. Here, we present a neural network approach for plug/droplet detection. A comprehensive data set for neural network training was compiled. The results of the neural network training are discussed, and a comparison with the image processing algorithm is provided. The proposed method has shown consistent numerical measurements. The average deviations of the measured plug size and velocity did not exceed 1.71% and 0.91%, respectively. New data on the plug size and velocity for an extremely low-viscosity ratio of the phases have been ob-tained.
KW - detection
KW - microchannel
KW - neural network
KW - plug flow
KW - two-phase flow
UR - http://www.scopus.com/inward/record.url?scp=85134852917&partnerID=8YFLogxK
UR - https://www.mendeley.com/catalogue/a86a8452-8d87-358e-b1b3-00ccaa73bf9f/
U2 - 10.1615/InterfacPhenomHeatTransfer.2022043493
DO - 10.1615/InterfacPhenomHeatTransfer.2022043493
M3 - Article
AN - SCOPUS:85134852917
VL - 10
SP - 15
EP - 24
JO - Interfacial Phenomena and Heat Transfer
JF - Interfacial Phenomena and Heat Transfer
SN - 2169-2785
IS - 1
ER -
ID: 36709691