Model of the behavior of aluminum and aluminum-based mixtures under shock-wave loading

Standard

Model of the behavior of aluminum and aluminum-based mixtures under shock-wave loading. / Kinelovskii, S. A.; Maevskii, K. K.

In: High Temperature, Vol. 52, No. 6, 7, 16.12.2014, p. 821-829.

Research output: Contribution to journal › Article › peer-review

BibTeX

@article{f837ddbc28dc4822934883df0f696dc9,

title = "Model of the behavior of aluminum and aluminum-based mixtures under shock-wave loading",

abstract = "A thermodynamically equilibrium model is applied to describe the behavior of solid and porous materials. This model ensures good compliance with the experiment in a wide range of pressures. The gas in pores, which is a component of the medium, is taken into account in this model. The equation of state of the Mie-Gr{\"u}neisen type with allowance for the dependence of the Gr{\"u}neisen coefficient on temperature is used for condensed phases. The applied model allows the behavior of the aluminum with a porosity from 1 to 8 to be calculated under shock-wave loading at pressures above 5 GPa in the one-velocity and one-temperature approximations, as well as on the assumption of equal pressures for all the phases. Computational results are compared with the well-known experimental results obtained by different authors (shock adiabats, double compression by shock waves, and temperature estimation). The model permits the shock-wave loading of solid and porous mixtures with aluminum in their composition to be described reliably solely by using species parameters.",

author = "Kinelovskii, {S. A.} and Maevskii, {K. K.}",

note = "Funding Information: ACKNOWLEDGMENTS This work was supported in part by the Russian Foundation for Basic Research (project nos. 10 03 00527 and 13 03 00663). Publisher Copyright: {\textcopyright} 2014, Pleiades Publishing, Ltd. Copyright: Copyright 2015 Elsevier B.V., All rights reserved.",

year = "2014",

month = dec,

day = "16",

doi = "10.1134/S0018151X14050083",

language = "English",

volume = "52",

pages = "821--829",

journal = "High Temperature",

issn = "0018-151X",

publisher = "Maik Nauka-Interperiodica Publishing",

number = "6",

}

RIS

TY - JOUR

T1 - Model of the behavior of aluminum and aluminum-based mixtures under shock-wave loading

AU - Kinelovskii, S. A.

AU - Maevskii, K. K.

N1 - Funding Information: ACKNOWLEDGMENTS This work was supported in part by the Russian Foundation for Basic Research (project nos. 10 03 00527 and 13 03 00663). Publisher Copyright: © 2014, Pleiades Publishing, Ltd. Copyright: Copyright 2015 Elsevier B.V., All rights reserved.

PY - 2014/12/16

Y1 - 2014/12/16

N2 - A thermodynamically equilibrium model is applied to describe the behavior of solid and porous materials. This model ensures good compliance with the experiment in a wide range of pressures. The gas in pores, which is a component of the medium, is taken into account in this model. The equation of state of the Mie-Grüneisen type with allowance for the dependence of the Grüneisen coefficient on temperature is used for condensed phases. The applied model allows the behavior of the aluminum with a porosity from 1 to 8 to be calculated under shock-wave loading at pressures above 5 GPa in the one-velocity and one-temperature approximations, as well as on the assumption of equal pressures for all the phases. Computational results are compared with the well-known experimental results obtained by different authors (shock adiabats, double compression by shock waves, and temperature estimation). The model permits the shock-wave loading of solid and porous mixtures with aluminum in their composition to be described reliably solely by using species parameters.

AB - A thermodynamically equilibrium model is applied to describe the behavior of solid and porous materials. This model ensures good compliance with the experiment in a wide range of pressures. The gas in pores, which is a component of the medium, is taken into account in this model. The equation of state of the Mie-Grüneisen type with allowance for the dependence of the Grüneisen coefficient on temperature is used for condensed phases. The applied model allows the behavior of the aluminum with a porosity from 1 to 8 to be calculated under shock-wave loading at pressures above 5 GPa in the one-velocity and one-temperature approximations, as well as on the assumption of equal pressures for all the phases. Computational results are compared with the well-known experimental results obtained by different authors (shock adiabats, double compression by shock waves, and temperature estimation). The model permits the shock-wave loading of solid and porous mixtures with aluminum in their composition to be described reliably solely by using species parameters.

UR - http://www.scopus.com/inward/record.url?scp=84919650012&partnerID=8YFLogxK

UR - https://www.elibrary.ru/item.asp?id=24021221

U2 - 10.1134/S0018151X14050083

DO - 10.1134/S0018151X14050083

M3 - Article

AN - SCOPUS:84919650012

VL - 52

SP - 821

EP - 829

JO - High Temperature

JF - High Temperature

SN - 0018-151X

IS - 6

M1 - 7

ER -

ID: 27437182