Research output: Contribution to journal › Article › peer-review
Long-pulse plasma source for SMOLA helical mirror. / Ivanov, Ivan A.; Ustyuzhanin, V. O.; Sudnikov, A. V. et al.
In: Journal of Plasma Physics, 12.03.2021.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - Long-pulse plasma source for SMOLA helical mirror
AU - Ivanov, Ivan A.
AU - Ustyuzhanin, V. O.
AU - Sudnikov, A. V.
AU - Inzhevatkina, A.
N1 - Publisher Copyright: Copyright © The Author(s), 2021. Published by Cambridge University Press. Copyright: Copyright 2021 Elsevier B.V., All rights reserved.
PY - 2021/3/12
Y1 - 2021/3/12
N2 - A plasma gun for forming a plasma stream in the open magnetic mirror trap with additional helicoidal field SMOLA is described. The plasma gun is an axisymmetric system with a planar circular hot cathode based on lanthanum hexaboride and a hollow copper anode. The two planar coils are located around the plasma source and create a magnetic field of up to 200 mT. The magnetic field forms the magnetron configuration of the discharge and provides a radial electric insulation. The source typically operates with a discharge current of up to 350 A in hydrogen. Plasma parameters in the SMOLA device are Ti ∼ 5 eV, Te ∼ 5-40 eV and ni ∼ (0.1-1) × 1019 m-3. Helium plasma can also be created. The plasma properties depend on the whole group of initial technical parameters: the cathode temperature, the feeding gas flow, the anode-cathode supply voltage and the magnitude of the cathode magnetic insulation.
AB - A plasma gun for forming a plasma stream in the open magnetic mirror trap with additional helicoidal field SMOLA is described. The plasma gun is an axisymmetric system with a planar circular hot cathode based on lanthanum hexaboride and a hollow copper anode. The two planar coils are located around the plasma source and create a magnetic field of up to 200 mT. The magnetic field forms the magnetron configuration of the discharge and provides a radial electric insulation. The source typically operates with a discharge current of up to 350 A in hydrogen. Plasma parameters in the SMOLA device are Ti ∼ 5 eV, Te ∼ 5-40 eV and ni ∼ (0.1-1) × 1019 m-3. Helium plasma can also be created. The plasma properties depend on the whole group of initial technical parameters: the cathode temperature, the feeding gas flow, the anode-cathode supply voltage and the magnitude of the cathode magnetic insulation.
KW - electric discharges
KW - plasma devices
KW - plasma properties
UR - http://www.scopus.com/inward/record.url?scp=85102599212&partnerID=8YFLogxK
U2 - 10.1017/S0022377821000131
DO - 10.1017/S0022377821000131
M3 - Article
AN - SCOPUS:85102599212
JO - Journal of Plasma Physics
JF - Journal of Plasma Physics
SN - 0022-3778
M1 - 845870201
ER -
ID: 28080166