Standard

Integration of ITER diagnostic ports at the Budker institute. / Shoshin, A.; Burdakov, A.; Ivantsivskiy, M. et al.

In: Fusion Engineering and Design, Vol. 178, 113114, 05.2022.

Research output: Contribution to journalArticlepeer-review

Harvard

Shoshin, A, Burdakov, A, Ivantsivskiy, M, Reichle, R, Udintsev, V, Guirao, J, Pak, S, Zvonkov, A, Kravtsov, D, Sorokina, N, Sulyaev, Y, Listopad, A, Gavrilenko, D, Taskaev, A, Shabunin, E, Seryomin, V, Shiyankov, S, Zaytcev, E, Seleznev, P, Semenov, A, Polosatkin, S, Taskaev, S, Kasatov, D, Shchudlo, I, Bikchurina, M, Modestov, V, Smirnov, A, Pozhilov, A, Lobachev, A, Loginov, I, Shagniev, O, Kirienko, I & Buslakov, I 2022, 'Integration of ITER diagnostic ports at the Budker institute', Fusion Engineering and Design, vol. 178, 113114. https://doi.org/10.1016/j.fusengdes.2022.113114

APA

Shoshin, A., Burdakov, A., Ivantsivskiy, M., Reichle, R., Udintsev, V., Guirao, J., Pak, S., Zvonkov, A., Kravtsov, D., Sorokina, N., Sulyaev, Y., Listopad, A., Gavrilenko, D., Taskaev, A., Shabunin, E., Seryomin, V., Shiyankov, S., Zaytcev, E., Seleznev, P., ... Buslakov, I. (2022). Integration of ITER diagnostic ports at the Budker institute. Fusion Engineering and Design, 178, [113114]. https://doi.org/10.1016/j.fusengdes.2022.113114

Vancouver

Shoshin A, Burdakov A, Ivantsivskiy M, Reichle R, Udintsev V, Guirao J et al. Integration of ITER diagnostic ports at the Budker institute. Fusion Engineering and Design. 2022 May;178:113114. doi: 10.1016/j.fusengdes.2022.113114

Author

Shoshin, A. ; Burdakov, A. ; Ivantsivskiy, M. et al. / Integration of ITER diagnostic ports at the Budker institute. In: Fusion Engineering and Design. 2022 ; Vol. 178.

BibTeX

@article{8fd521508b624dc8a394cce35996f4d6,
title = "Integration of ITER diagnostic ports at the Budker institute",
abstract = "The paper presents results of the design development of the diagnostic equatorial and upper ports by RF DA (Russian Federation Domestic Agency) and results of the preparation of the production and assembly areas. The ports are being developed at the Budker Institute of Nuclear Physics of the Siberian Branch of the Russian Academy of Sciences (BINP) in good coordination with the ITER Central Team with the task of standardizing ports. Studies of boron carbide ceramics were conducted to prove that they meet the requirements of ITER. The preparation of port-plug production and the construction of the assembly hall at the BINP are described.",
keywords = "Diagnostic ports, Integration of diagnostics, ITER, Neutron activation, Outgassing test",
author = "A. Shoshin and A. Burdakov and M. Ivantsivskiy and R. Reichle and V. Udintsev and J. Guirao and S. Pak and A. Zvonkov and D. Kravtsov and N. Sorokina and Y. Sulyaev and A. Listopad and D. Gavrilenko and A. Taskaev and E. Shabunin and V. Seryomin and S. Shiyankov and E. Zaytcev and P. Seleznev and A. Semenov and S. Polosatkin and S. Taskaev and D. Kasatov and I. Shchudlo and M. Bikchurina and V. Modestov and A. Smirnov and A. Pozhilov and A. Lobachev and I. Loginov and O. Shagniev and I. Kirienko and I. Buslakov",
note = "Funding Information: Ceramic laser irradiation experiments are financed by the Ministry of Science and Higher Education of the Russian Federation. Funding Information: The research is partially funded by the Ministry of Science and Higher Education of the Russian Federation under the strategic academic leadership program 'Priority 2030′ (Agreement 075–15–2021–1333 dated 30.09.2021). Funding Information: Neutron activation study was supported by the Russian Science Foundation (project no. 19–72–30005 ). Publisher Copyright: {\textcopyright} 2022",
year = "2022",
month = may,
doi = "10.1016/j.fusengdes.2022.113114",
language = "English",
volume = "178",
journal = "Fusion Engineering and Design",
issn = "0920-3796",
publisher = "Elsevier",

}

RIS

TY - JOUR

T1 - Integration of ITER diagnostic ports at the Budker institute

AU - Shoshin, A.

AU - Burdakov, A.

AU - Ivantsivskiy, M.

AU - Reichle, R.

AU - Udintsev, V.

AU - Guirao, J.

AU - Pak, S.

AU - Zvonkov, A.

AU - Kravtsov, D.

AU - Sorokina, N.

AU - Sulyaev, Y.

AU - Listopad, A.

AU - Gavrilenko, D.

AU - Taskaev, A.

AU - Shabunin, E.

AU - Seryomin, V.

AU - Shiyankov, S.

AU - Zaytcev, E.

AU - Seleznev, P.

AU - Semenov, A.

AU - Polosatkin, S.

AU - Taskaev, S.

AU - Kasatov, D.

AU - Shchudlo, I.

AU - Bikchurina, M.

AU - Modestov, V.

AU - Smirnov, A.

AU - Pozhilov, A.

AU - Lobachev, A.

AU - Loginov, I.

AU - Shagniev, O.

AU - Kirienko, I.

AU - Buslakov, I.

N1 - Funding Information: Ceramic laser irradiation experiments are financed by the Ministry of Science and Higher Education of the Russian Federation. Funding Information: The research is partially funded by the Ministry of Science and Higher Education of the Russian Federation under the strategic academic leadership program 'Priority 2030′ (Agreement 075–15–2021–1333 dated 30.09.2021). Funding Information: Neutron activation study was supported by the Russian Science Foundation (project no. 19–72–30005 ). Publisher Copyright: © 2022

PY - 2022/5

Y1 - 2022/5

N2 - The paper presents results of the design development of the diagnostic equatorial and upper ports by RF DA (Russian Federation Domestic Agency) and results of the preparation of the production and assembly areas. The ports are being developed at the Budker Institute of Nuclear Physics of the Siberian Branch of the Russian Academy of Sciences (BINP) in good coordination with the ITER Central Team with the task of standardizing ports. Studies of boron carbide ceramics were conducted to prove that they meet the requirements of ITER. The preparation of port-plug production and the construction of the assembly hall at the BINP are described.

AB - The paper presents results of the design development of the diagnostic equatorial and upper ports by RF DA (Russian Federation Domestic Agency) and results of the preparation of the production and assembly areas. The ports are being developed at the Budker Institute of Nuclear Physics of the Siberian Branch of the Russian Academy of Sciences (BINP) in good coordination with the ITER Central Team with the task of standardizing ports. Studies of boron carbide ceramics were conducted to prove that they meet the requirements of ITER. The preparation of port-plug production and the construction of the assembly hall at the BINP are described.

KW - Diagnostic ports

KW - Integration of diagnostics

KW - ITER

KW - Neutron activation

KW - Outgassing test

UR - http://www.scopus.com/inward/record.url?scp=85126967768&partnerID=8YFLogxK

UR - https://www.mendeley.com/catalogue/5d6cb017-62ff-3481-abf0-e59c73f951c4/

U2 - 10.1016/j.fusengdes.2022.113114

DO - 10.1016/j.fusengdes.2022.113114

M3 - Article

AN - SCOPUS:85126967768

VL - 178

JO - Fusion Engineering and Design

JF - Fusion Engineering and Design

SN - 0920-3796

M1 - 113114

ER -

ID: 35766418