Standard

Influence of Jet Velocity on Critical Heat Flux during Two-Phase Microjet Cooling of Electronics with HFE-7100. / Kuznetsov, V. V.; Shamirzaev, A. S.; Mordovskoi, A. S.

In: Journal of Engineering Thermophysics, Vol. 32, No. 2, 06.2023, p. 208-213.

Research output: Contribution to journal › Article › peer-review

Harvard

Kuznetsov, VV, Shamirzaev, AS & Mordovskoi, AS 2023, 'Influence of Jet Velocity on Critical Heat Flux during Two-Phase Microjet Cooling of Electronics with HFE-7100', Journal of Engineering Thermophysics, vol. 32, no. 2, pp. 208-213. https://doi.org/10.1134/S1810232823020030

APA

Kuznetsov, V. V., Shamirzaev, A. S., & Mordovskoi, A. S. (2023). Influence of Jet Velocity on Critical Heat Flux during Two-Phase Microjet Cooling of Electronics with HFE-7100. Journal of Engineering Thermophysics, 32(2), 208-213. https://doi.org/10.1134/S1810232823020030

Vancouver

Kuznetsov VV, Shamirzaev AS, Mordovskoi AS. Influence of Jet Velocity on Critical Heat Flux during Two-Phase Microjet Cooling of Electronics with HFE-7100. Journal of Engineering Thermophysics. 2023 Jun;32(2):208-213. doi: 10.1134/S1810232823020030

Author

Kuznetsov, V. V. ; Shamirzaev, A. S. ; Mordovskoi, A. S. / Influence of Jet Velocity on Critical Heat Flux during Two-Phase Microjet Cooling of Electronics with HFE-7100. In: Journal of Engineering Thermophysics. 2023 ; Vol. 32, No. 2. pp. 208-213.

BibTeX

@article{6feacd1747c2468db60089629460c744,
title = "Influence of Jet Velocity on Critical Heat Flux during Two-Phase Microjet Cooling of Electronics with HFE-7100",
abstract = "The influence of the average velocity of jet of HFE-7100 dielectric liquid on the heat transfer and the critical heat flux was experimentally studied with the use of an array of 36 submerged impinging microjets at a large initial subcooling. The heating surface was cooled in a slot-shaped channel with a gap of 1 mm for a distributed array of microjets with diameter of 174 μm. With the distributed array of microjets of dielectric liquid with low heat of vaporization and thermal conductivity, at an initial liquid subcooling of 38.2°C relative to the saturation temperature it was possible to obtain a critical heat flux of 237 W/cm2 at a jet velocity of 9.56 m/s, which corresponds to a heat release source power of 186 W.",
author = "Kuznetsov, {V. V.} and Shamirzaev, {A. S.} and Mordovskoi, {A. S.}",
note = "The study was carried out at Kutateladze Institute of Thermophysics, SB RAS, funded by Russian Science Foundation, grant no. 21-19-00626; https://rscf.ru/project/21-19-00626/. Публикация для корректировки.",
year = "2023",
month = jun,
doi = "10.1134/S1810232823020030",
language = "English",
volume = "32",
pages = "208--213",
journal = "Journal of Engineering Thermophysics",
issn = "1810-2328",
publisher = "Maik Nauka-Interperiodica Publishing",
number = "2",

}

RIS

TY - JOUR

T1 - Influence of Jet Velocity on Critical Heat Flux during Two-Phase Microjet Cooling of Electronics with HFE-7100

AU - Kuznetsov, V. V.

AU - Shamirzaev, A. S.

AU - Mordovskoi, A. S.

N1 - The study was carried out at Kutateladze Institute of Thermophysics, SB RAS, funded by Russian Science Foundation, grant no. 21-19-00626; https://rscf.ru/project/21-19-00626/. Публикация для корректировки.

PY - 2023/6

Y1 - 2023/6

N2 - The influence of the average velocity of jet of HFE-7100 dielectric liquid on the heat transfer and the critical heat flux was experimentally studied with the use of an array of 36 submerged impinging microjets at a large initial subcooling. The heating surface was cooled in a slot-shaped channel with a gap of 1 mm for a distributed array of microjets with diameter of 174 μm. With the distributed array of microjets of dielectric liquid with low heat of vaporization and thermal conductivity, at an initial liquid subcooling of 38.2°C relative to the saturation temperature it was possible to obtain a critical heat flux of 237 W/cm2 at a jet velocity of 9.56 m/s, which corresponds to a heat release source power of 186 W.

AB - The influence of the average velocity of jet of HFE-7100 dielectric liquid on the heat transfer and the critical heat flux was experimentally studied with the use of an array of 36 submerged impinging microjets at a large initial subcooling. The heating surface was cooled in a slot-shaped channel with a gap of 1 mm for a distributed array of microjets with diameter of 174 μm. With the distributed array of microjets of dielectric liquid with low heat of vaporization and thermal conductivity, at an initial liquid subcooling of 38.2°C relative to the saturation temperature it was possible to obtain a critical heat flux of 237 W/cm2 at a jet velocity of 9.56 m/s, which corresponds to a heat release source power of 186 W.

UR - https://www.scopus.com/record/display.uri?eid=2-s2.0-85165224845&origin=inward&txGid=66b0a90d94d1290bcdbf0454829a0040

UR - https://www.mendeley.com/catalogue/52e2d62b-3d55-359d-a0b2-e29a292df059/

U2 - 10.1134/S1810232823020030

DO - 10.1134/S1810232823020030

M3 - Article

VL - 32

SP - 208

EP - 213

JO - Journal of Engineering Thermophysics

JF - Journal of Engineering Thermophysics

SN - 1810-2328

IS - 2

ER -

ID: 59583380