Research output: Contribution to journal › Article › peer-review
Hydroconversion of methyl palmitate over Ni-phosphide catalysts on SAPO-11 and ZSM-5 composite supports. / Shamanaev, Ivan V.; Vlasova, Evgenia N.; Scherbakova, Anastasia M. et al.
In: Microporous and Mesoporous Materials, Vol. 359, 112667, 09.2023.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - Hydroconversion of methyl palmitate over Ni-phosphide catalysts on SAPO-11 and ZSM-5 composite supports
AU - Shamanaev, Ivan V.
AU - Vlasova, Evgenia N.
AU - Scherbakova, Anastasia M.
AU - Pakharukova, Vera P.
AU - Gerasimov, Evgeny Y.
AU - Yakovlev, Ilya V.
AU - Fedorov, Alexey Yu
AU - Bukhtiyarova, Galina A.
N1 - This work was supported by the Russian Science Foundation (grant no. 22-13-00371 ). Публикация для корректировки.
PY - 2023/9
Y1 - 2023/9
N2 - Zeolite materials (SAPO-11 or ZSM-5) were used to prepare modified Al2O3 supports by mixing with Al oxide hydroxide, peptization with HNO3 and subsequent extrusion. The obtained Al2O3-SAPO-11 and Al2O3-ZSM-5 (with 30 wt% zeolite content) were impregnated by solutions containing Ni and P precursors: phosphate (A), phosphite (I), and hypophosphite (H). Ni-phosphide catalysts were prepared by temperature-programmed reduction in hydrogen flow and characterized by ICP-AES chemical analysis, low-temperature N2 physisorption, H2-TPR, NH3-TPD, XRD, 27Al MAS NMR, XPS. The catalysts were tested in methyl palmitate (MP) hydroconversion (HC, i.e. hydrodeoxygenation (HDO) + hydroisomerization/hydrocracking). 100% MP conversion was achieved over all catalysts (flow reactor at 340 °C, 2.0 MPa, 5.3 h−1). For Ni2P/Al2O3-SAPO-11 catalysts the overall yield of iso-alkanes (iso-C15 and iso-C16) increased in the following order of precursors: A < I < H. The highest yield of iso-alkanes was 21% over Ni2P/Al2O3-SAPO-11 H catalyst. Ni2P/Al2O3-ZSM-5 samples possessed high cracking activity. Alkanes from MP HDO as well as the solvent (n-dodecane) were almost completely transformed to C6–C9 alkanes at 340 °C. Decreasing temperature (290, 270 °C) did not result in significant yield of iso-alkanes over Ni2P/Al2O3-ZSM-5 catalysts.
AB - Zeolite materials (SAPO-11 or ZSM-5) were used to prepare modified Al2O3 supports by mixing with Al oxide hydroxide, peptization with HNO3 and subsequent extrusion. The obtained Al2O3-SAPO-11 and Al2O3-ZSM-5 (with 30 wt% zeolite content) were impregnated by solutions containing Ni and P precursors: phosphate (A), phosphite (I), and hypophosphite (H). Ni-phosphide catalysts were prepared by temperature-programmed reduction in hydrogen flow and characterized by ICP-AES chemical analysis, low-temperature N2 physisorption, H2-TPR, NH3-TPD, XRD, 27Al MAS NMR, XPS. The catalysts were tested in methyl palmitate (MP) hydroconversion (HC, i.e. hydrodeoxygenation (HDO) + hydroisomerization/hydrocracking). 100% MP conversion was achieved over all catalysts (flow reactor at 340 °C, 2.0 MPa, 5.3 h−1). For Ni2P/Al2O3-SAPO-11 catalysts the overall yield of iso-alkanes (iso-C15 and iso-C16) increased in the following order of precursors: A < I < H. The highest yield of iso-alkanes was 21% over Ni2P/Al2O3-SAPO-11 H catalyst. Ni2P/Al2O3-ZSM-5 samples possessed high cracking activity. Alkanes from MP HDO as well as the solvent (n-dodecane) were almost completely transformed to C6–C9 alkanes at 340 °C. Decreasing temperature (290, 270 °C) did not result in significant yield of iso-alkanes over Ni2P/Al2O3-ZSM-5 catalysts.
KW - Cracking
KW - Hydrodeoxygenation
KW - Isomerization
KW - Nickel phosphide catalysts
KW - SAPO-11
KW - ZSM-5
UR - https://www.scopus.com/record/display.uri?eid=2-s2.0-85160849392&origin=inward&txGid=1cd8a2881848124f50a5027997a5eda4
UR - https://www.mendeley.com/catalogue/bfd31fce-a297-3630-b2ba-183e62d30b92/
U2 - 10.1016/j.micromeso.2023.112667
DO - 10.1016/j.micromeso.2023.112667
M3 - Article
VL - 359
JO - Microporous and Mesoporous Materials
JF - Microporous and Mesoporous Materials
SN - 1387-1811
M1 - 112667
ER -
ID: 59264749