Research output: Contribution to journal › Article › peer-review
High-pressure liquid chromatography with direct injection of gas sample. / Astanin, Anton I.; Baram, Grigory I.
In: Journal of Chromatography A, Vol. 1501, 09.06.2017, p. 167-170.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - High-pressure liquid chromatography with direct injection of gas sample
AU - Astanin, Anton I.
AU - Baram, Grigory I.
N1 - Copyright © 2017 Elsevier B.V. All rights reserved.
PY - 2017/6/9
Y1 - 2017/6/9
N2 - The conventional method of using liquid chromatography to determine the composition of a gaseous mixture entails dissolving vapors in a suitable solvent, then obtaining a chromatograph of the resulting solution. We studied the direct introduction of a gaseous sample into a C18 reversed-phase column, followed by separation of the components by HPLC with UV detection. Since the chromatography was performed at high pressure, vapors readily dissolved in the eluent and the substances separated in the column as effectively as in liquid samples. Samples were injected into the column in two ways: a) through the valve without a flow stop; b) after stopping the flow and relieving all pressure. We showed that an injectable gas volume could reach 70% of column dead volume. When an injected gaseous sample volume was less than 10% of the column dead volume, the resulting peaks were symmetrical and the column efficiency was high.
AB - The conventional method of using liquid chromatography to determine the composition of a gaseous mixture entails dissolving vapors in a suitable solvent, then obtaining a chromatograph of the resulting solution. We studied the direct introduction of a gaseous sample into a C18 reversed-phase column, followed by separation of the components by HPLC with UV detection. Since the chromatography was performed at high pressure, vapors readily dissolved in the eluent and the substances separated in the column as effectively as in liquid samples. Samples were injected into the column in two ways: a) through the valve without a flow stop; b) after stopping the flow and relieving all pressure. We showed that an injectable gas volume could reach 70% of column dead volume. When an injected gaseous sample volume was less than 10% of the column dead volume, the resulting peaks were symmetrical and the column efficiency was high.
KW - Gas injection
KW - HPLC
KW - Oxygen analysis
KW - Chromatography, High Pressure Liquid/instrumentation
KW - Chromatography, Reverse-Phase/instrumentation
KW - Gases/analysis
KW - OXYGEN
UR - http://www.scopus.com/inward/record.url?scp=85018251029&partnerID=8YFLogxK
U2 - 10.1016/j.chroma.2017.04.042
DO - 10.1016/j.chroma.2017.04.042
M3 - Article
C2 - 28465035
AN - SCOPUS:85018251029
VL - 1501
SP - 167
EP - 170
JO - Journal of Chromatography A
JF - Journal of Chromatography A
SN - 0021-9673
ER -
ID: 10259502