Research output: Contribution to journal › Article › peer-review
Graphene-based humidity sensors : The origin of alternating resistance change. / Popov, V. I.; Nikolaev, D. V.; Timofeev, V. B. et al.
In: Nanotechnology, Vol. 28, No. 35, 355501, 26.07.2017.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - Graphene-based humidity sensors
T2 - The origin of alternating resistance change
AU - Popov, V. I.
AU - Nikolaev, D. V.
AU - Timofeev, V. B.
AU - Smagulova, S. A.
AU - Antonova, I. V.
PY - 2017/7/26
Y1 - 2017/7/26
N2 - The response of a graphene-based humidity sensor is considered as a function of film structures. Analysis of the resistance changes due to water molecule adsorption on the graphene or multi-layer graphene (MLG) surface is performed for films with different structures and resistivities from hundreds of ohms/sq to hundreds of kilo-ohms/sq. The results revealed possible increase, decrease and non-monotonous behavior of resistance with changes in film structure. Adsorption of water molecules at grain boundary defects is assumed to lead to an increase in film resistivity due to the donor property of water and the p-type conductivity of graphene. Another type of conductive center with a higher capture cross-section is realized in the case of water molecule adsorption at edge defects in MLG films (the formation of conductive chains with ionic conductivity). If these chains form a continuous network the film resistivity decreases. The result of the competition between the opposite effects of the conductivity compensation and formation of the water-based conductive chains depends on the film structure and determines the response of humidity sensors. Sensor sensitivity is found to increase when only one type of defect determines water adsorption (edge defects or grain boundary defects).
AB - The response of a graphene-based humidity sensor is considered as a function of film structures. Analysis of the resistance changes due to water molecule adsorption on the graphene or multi-layer graphene (MLG) surface is performed for films with different structures and resistivities from hundreds of ohms/sq to hundreds of kilo-ohms/sq. The results revealed possible increase, decrease and non-monotonous behavior of resistance with changes in film structure. Adsorption of water molecules at grain boundary defects is assumed to lead to an increase in film resistivity due to the donor property of water and the p-type conductivity of graphene. Another type of conductive center with a higher capture cross-section is realized in the case of water molecule adsorption at edge defects in MLG films (the formation of conductive chains with ionic conductivity). If these chains form a continuous network the film resistivity decreases. The result of the competition between the opposite effects of the conductivity compensation and formation of the water-based conductive chains depends on the film structure and determines the response of humidity sensors. Sensor sensitivity is found to increase when only one type of defect determines water adsorption (edge defects or grain boundary defects).
KW - CVD graphene
KW - humidity sensor
KW - nature of response
KW - resistance change
KW - OXIDE
KW - FABRICATION
KW - WATER
UR - http://www.scopus.com/inward/record.url?scp=85027365142&partnerID=8YFLogxK
U2 - 10.1088/1361-6528/aa7b6e
DO - 10.1088/1361-6528/aa7b6e
M3 - Article
AN - SCOPUS:85027365142
VL - 28
JO - Nanotechnology
JF - Nanotechnology
SN - 0957-4484
IS - 35
M1 - 355501
ER -
ID: 9965550