Standard

Experimental Investigation of Adiabatic Gas-Liquid Flow Regimes and Pressure Drop in Slit Microchannel. / Ronshin, F. V.; Dementyev, Yu A.; Chinnov, E. A. et al.

In: Microgravity Science and Technology, Vol. 31, No. 5, 01.10.2019, p. 693-707.

Research output: Contribution to journalArticlepeer-review

Harvard

APA

Vancouver

Ronshin FV, Dementyev YA, Chinnov EA, Cheverda VV, Kabov OA. Experimental Investigation of Adiabatic Gas-Liquid Flow Regimes and Pressure Drop in Slit Microchannel. Microgravity Science and Technology. 2019 Oct 1;31(5):693-707. doi: 10.1007/s12217-019-09747-1

Author

Ronshin, F. V. ; Dementyev, Yu A. ; Chinnov, E. A. et al. / Experimental Investigation of Adiabatic Gas-Liquid Flow Regimes and Pressure Drop in Slit Microchannel. In: Microgravity Science and Technology. 2019 ; Vol. 31, No. 5. pp. 693-707.

BibTeX

@article{a8e64fa468cf4cbd9ac730d169202a88,
title = "Experimental Investigation of Adiabatic Gas-Liquid Flow Regimes and Pressure Drop in Slit Microchannel",
abstract = "The flow regimes and pressure drop in a slit microchannel with a height of 164 μm and width of 10 mm are studied experimentally. The boundaries between the regimes are precisely determined using the developed procedure. The homogeneous flow model and the separated flow model are considered for determining the frictional pressure drop. Experimental data are compared with theoretical models. For the homogeneous flow model, the Dukler correlation gives good agreement with experimental data with a mean absolute error of 12%. A new correlation, which describes the experimental data with a mean absolute error of 8.1%, is proposed for the homogeneous flow model. For the separated flow model, the Hwang and Kim correlation gives the best agreement with a mean absolute error of 12.8%. The dependence of the pressure drop in the film flows (annular and stratified regimes) on the mass gas quality has been investigated. It is shown that the minimal pressure drop for the film flows is achieved in the stratified regime; thus, it is the most promising for the use in technical applications.",
keywords = "Microchannel, Pressure drop, Regimes, Two-phase flow, 2-PHASE FLOW, HEAT-TRANSFER, PATTERNS, PREDICTION, EVAPORATION, DIAMETER, AIR-WATER, CHANNEL, R-134A, R-12",
author = "Ronshin, {F. V.} and Dementyev, {Yu A.} and Chinnov, {E. A.} and Cheverda, {V. V.} and Kabov, {O. A.}",
year = "2019",
month = oct,
day = "1",
doi = "10.1007/s12217-019-09747-1",
language = "English",
volume = "31",
pages = "693--707",
journal = "Microgravity Science and Technology",
issn = "0938-0108",
publisher = "Springer Netherlands",
number = "5",

}

RIS

TY - JOUR

T1 - Experimental Investigation of Adiabatic Gas-Liquid Flow Regimes and Pressure Drop in Slit Microchannel

AU - Ronshin, F. V.

AU - Dementyev, Yu A.

AU - Chinnov, E. A.

AU - Cheverda, V. V.

AU - Kabov, O. A.

PY - 2019/10/1

Y1 - 2019/10/1

N2 - The flow regimes and pressure drop in a slit microchannel with a height of 164 μm and width of 10 mm are studied experimentally. The boundaries between the regimes are precisely determined using the developed procedure. The homogeneous flow model and the separated flow model are considered for determining the frictional pressure drop. Experimental data are compared with theoretical models. For the homogeneous flow model, the Dukler correlation gives good agreement with experimental data with a mean absolute error of 12%. A new correlation, which describes the experimental data with a mean absolute error of 8.1%, is proposed for the homogeneous flow model. For the separated flow model, the Hwang and Kim correlation gives the best agreement with a mean absolute error of 12.8%. The dependence of the pressure drop in the film flows (annular and stratified regimes) on the mass gas quality has been investigated. It is shown that the minimal pressure drop for the film flows is achieved in the stratified regime; thus, it is the most promising for the use in technical applications.

AB - The flow regimes and pressure drop in a slit microchannel with a height of 164 μm and width of 10 mm are studied experimentally. The boundaries between the regimes are precisely determined using the developed procedure. The homogeneous flow model and the separated flow model are considered for determining the frictional pressure drop. Experimental data are compared with theoretical models. For the homogeneous flow model, the Dukler correlation gives good agreement with experimental data with a mean absolute error of 12%. A new correlation, which describes the experimental data with a mean absolute error of 8.1%, is proposed for the homogeneous flow model. For the separated flow model, the Hwang and Kim correlation gives the best agreement with a mean absolute error of 12.8%. The dependence of the pressure drop in the film flows (annular and stratified regimes) on the mass gas quality has been investigated. It is shown that the minimal pressure drop for the film flows is achieved in the stratified regime; thus, it is the most promising for the use in technical applications.

KW - Microchannel

KW - Pressure drop

KW - Regimes

KW - Two-phase flow

KW - 2-PHASE FLOW

KW - HEAT-TRANSFER

KW - PATTERNS

KW - PREDICTION

KW - EVAPORATION

KW - DIAMETER

KW - AIR-WATER

KW - CHANNEL

KW - R-134A

KW - R-12

UR - http://www.scopus.com/inward/record.url?scp=85074710616&partnerID=8YFLogxK

U2 - 10.1007/s12217-019-09747-1

DO - 10.1007/s12217-019-09747-1

M3 - Article

AN - SCOPUS:85074710616

VL - 31

SP - 693

EP - 707

JO - Microgravity Science and Technology

JF - Microgravity Science and Technology

SN - 0938-0108

IS - 5

ER -

ID: 22334142