Research output: Contribution to journal › Article › peer-review
Design of Catalytic Polyfunctional Nanomaterials for the Hydrogen Production Processes. / Potemkin, D. I.; Snytnikov, P. V.; Badmaev, S. D. et al.
In: Nanotechnologies in Russia, Vol. 15, No. 3-6, 05.2020, p. 308-313.Research output: Contribution to journal › Article › peer-review
}
TY - JOUR
T1 - Design of Catalytic Polyfunctional Nanomaterials for the Hydrogen Production Processes
AU - Potemkin, D. I.
AU - Snytnikov, P. V.
AU - Badmaev, S. D.
AU - Uskov, S. I.
AU - Gorlova, A. M.
AU - Rogozhnikov, V. N.
AU - Pechenkin, A. A.
AU - Kulikov, A. V.
AU - Shilov, V. A.
AU - Ruban, N. V.
AU - Belyaev, V. D.
AU - Sobyanin, V. A.
N1 - Funding Information: The work was financially supported by the Russian Foundation for Basic Research in the framework of project no. 19-33-60008 (D.I. Potemkin) for the study of the tri-reforming of methane. Publisher Copyright: © 2020, Pleiades Publishing, Ltd. Copyright: Copyright 2020 Elsevier B.V., All rights reserved.
PY - 2020/5
Y1 - 2020/5
N2 - The processes of hydrogen production from various types of fossil and renewable fuels are energy-intensive multi-route chemical reactions, and for their efficient implementation it is necessary to use selective and high-performance catalysts that combine high activity, thermal conductivity, and corrosion and thermal resistance. A general strategy for the design of catalytic systems for hydrogen production is outlined; it consists in the use of composite catalysts of the “metal nanoparticles/active oxide nanoparticles/structural oxide component/structured metal support” type; an approach for their directed synthesis is described. The structured metal support provides efficient heat removal or supply for exo- or endothermic reactions, possesses good hydrodynamic characteristics, and facilitates scale transition. The structural oxide component (aluminum oxide) provides thermal and corrosion resistance and a high specific surface area of the catalytic coating, as well as performing a protective function for the metal support. The active oxide component (mainly cerium–zirconium oxides) increases resistance to carbonization due to oxygen mobility and maintains a high dispersion of the active component due to its strong metal–support interaction. Metal nanoparticles 1–2 nm in size are involved in the activation of substrate molecules. FeCrAl alloy wire meshes, formed into cylindrical blocks of specified sizes, to be used as a heat-conducting substrate. By controlled annealing with the formation of a micron α-Al2O3 layer and subsequent deposition of a η-Al2O3 layer according to the Bayer method (through aluminum hydroxide), a structural layer of η-Al2O3 with a “breathing” needle morphology was deposited onto the FeCrAl alloy surface; then the catalytic active component was deposited onto this layer by impregnation and/or deposition. The efficiency of the proposed strategy is shown for Rh/Ce0.75Zr0.25O2 – δ–η-Al2O3/FeCrAl catalysts for methane tri-reforming and Cu–CeO2 – δ/η-Al2O3/FeCrAl catalysts for dimethoxymethane steam reforming.
AB - The processes of hydrogen production from various types of fossil and renewable fuels are energy-intensive multi-route chemical reactions, and for their efficient implementation it is necessary to use selective and high-performance catalysts that combine high activity, thermal conductivity, and corrosion and thermal resistance. A general strategy for the design of catalytic systems for hydrogen production is outlined; it consists in the use of composite catalysts of the “metal nanoparticles/active oxide nanoparticles/structural oxide component/structured metal support” type; an approach for their directed synthesis is described. The structured metal support provides efficient heat removal or supply for exo- or endothermic reactions, possesses good hydrodynamic characteristics, and facilitates scale transition. The structural oxide component (aluminum oxide) provides thermal and corrosion resistance and a high specific surface area of the catalytic coating, as well as performing a protective function for the metal support. The active oxide component (mainly cerium–zirconium oxides) increases resistance to carbonization due to oxygen mobility and maintains a high dispersion of the active component due to its strong metal–support interaction. Metal nanoparticles 1–2 nm in size are involved in the activation of substrate molecules. FeCrAl alloy wire meshes, formed into cylindrical blocks of specified sizes, to be used as a heat-conducting substrate. By controlled annealing with the formation of a micron α-Al2O3 layer and subsequent deposition of a η-Al2O3 layer according to the Bayer method (through aluminum hydroxide), a structural layer of η-Al2O3 with a “breathing” needle morphology was deposited onto the FeCrAl alloy surface; then the catalytic active component was deposited onto this layer by impregnation and/or deposition. The efficiency of the proposed strategy is shown for Rh/Ce0.75Zr0.25O2 – δ–η-Al2O3/FeCrAl catalysts for methane tri-reforming and Cu–CeO2 – δ/η-Al2O3/FeCrAl catalysts for dimethoxymethane steam reforming.
KW - CHALLENGES
KW - CONVERSION
KW - METHANOL
KW - GAS
UR - http://www.scopus.com/inward/record.url?scp=85098241092&partnerID=8YFLogxK
U2 - 10.1134/S1995078020030106
DO - 10.1134/S1995078020030106
M3 - Article
AN - SCOPUS:85098241092
VL - 15
SP - 308
EP - 313
JO - Nanotechnologies in Russia
JF - Nanotechnologies in Russia
SN - 1995-0780
IS - 3-6
ER -
ID: 27342405